journal article·2020-04

Biaxially-extended side-chain engineering of benzodithiophene-based conjugated polymers and their applications in polymer solar cells

Yu-Tai Wong, Po-Chen Lin, Chien-Wei Tseng, Yen-Wen Huang, Yu-An Su, Wen-Chang Chen, Chu-Chen Chueh

Publisher page

Abstract

Abstract Herein, three benzodithiophene (BDT)-based conjugated polymers, PBDTT-FBT, P3TBDT-FBT, and PTBOT-FBT, with gradually increased biaxially-extended side-chain conjugation are synthesized. The increase in the side-chain conjugated plane is revealed to enhance the π-π* transition and intramolecular charge transfer (ICT) of the polymer to result in improved absorption at near-ultraviolet region. Besides, the electron-withdrawing ability of the large side-chain conjugation effectively downshifts the energy levels of the derived polymer. Through providing complementary absorption spectra and suitable cascade energy levels, PTBOT-FBT with the largest side-chain conjugation is demonstrated as an effective third photoactive component for both fullerene and non-fullerene-acceptor (NFA) binary bulk-heterojunction (BHJ) systems, which enables a respective improvement of 2.5% and 11.8% in PCE of the studied fullerene- and NFA-based ternary solar cell devices. Moreover, it is found that the ternary NFA-based BHJ film exhibits a more favorable morphology after adding PTBOT-FBT as compared to the fullerene-based film, suggesting the higher tolerance of the polymers with bulky sidechains in the NFA system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
2. Green-solvent-processable organic solar cells10.1016/j.mattod.2016.02.019 ↗
3. Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells10.1039/c3ee41915k ↗
4. Development of annealing-free, solution-processable inverted organic solar cells with n-doped graphene electrodes using zinc oxide nanoparticles10.1021/acs.nanolett.7b05026 ↗
5. Ternary organic solar cells with small nonradiative recombination loss10.1021/acsenergylett.9b00681 ↗
6. 14.7% efficiency organic photovoltaic cells enabled by active materials with a large electrostatic potential difference10.1021/jacs.8b12937 ↗
7. High-performance ternary polymer solar cells using wide-bandgap biaxially extended octithiophene-based conjugated polymers10.1039/C8TC01542B ↗
8. Enhancing the performance of polymer solar cells via core engineering of NIR‐absorbing electron acceptors10.1002/adma.201706571 ↗
9. 11% Efficient ternary organic solar cells with high composition tolerance via integrated near‐IR sensitization and interface engineering10.1002/adma.201602834 ↗
10. Time‐dependent morphology evolution of solution‐processed small molecule solar cells during solvent vapor annealing10.1002/aenm.201502579 ↗
11. Influence of processing parameters and molecular weight on the morphology and properties of high‐performance PffBT4T‐2OD: PC71BM organic solar cells10.1002/aenm.201501400 ↗
12. Alkylthienyl substituted asymmetric 2D BDT and DTBT-based polymer solar cells with a power conversion efficiency of 9.2%10.1039/C7TA10247J ↗
13. Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2D-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
14. Low-bandgap near-IR conjugated polymers/molecules for organic electronics10.1021/acs.chemrev.5b00165 ↗
15. Side chain engineering in solution-processable conjugated polymers10.1021/cm4020805 ↗
16. Fullerene derivative‐doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low‐bandgap polymer (PTB7‐Th) for high performance10.1002/adma.201301476 ↗
17. A large‐bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
18. Energy-level modulation of non-fullerene acceptors to achieve high-efficiency polymer solar cells at a diminished energy offset10.1039/C7TA01554B ↗
19. Fluorinated and alkylthiolated polymeric donors enable both efficient fullerene and nonfullerene polymer solar cells10.1002/adfm.201706404 ↗
20. Fullerene‐free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
21. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
22. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
23. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
24. From semi-to full-two-dimensional conjugated side-chain design: a way toward comprehensive solar energy absorption10.1021/acs.macromol.7b02045 ↗
25. Two-dimensionally extended π-conjugation of donor–acceptor copolymers via oligothienyl side chains for efficient polymer solar cells10.1021/acs.macromol.5b00056 ↗
26. Novel benzodithiophene unit with an alkylthiobiphenyl side chain for constructing high-efficiency polymer solar cells10.1039/C9TC01082C ↗
27. Extending π-conjugation system with benzene: an effective method to improve the properties of benzodithiophene-based polymer for highly efficient organic solar cells10.1021/ma501756p ↗
28. Thieno [3, 2-b] thiophene-substituted benzo [1, 2-b: 4, 5-b′] dithiophene as a promising building block for low bandgap semiconducting polymers for high-performance single and tandem organic photovoltaic cells10.1021/cm4035903 ↗
29. 2D expanded conjugated polymers with non-fullerene acceptors for efficient polymer solar cells10.1039/C7TC04750A ↗
30. Improved open-circuit voltage of benzodithiophene based polymer solar cells using bulky terthiophene side group10.1016/j.solmat.2015.02.022 ↗
31. Side chain selection for designing highly efficient photovoltaic polymers with 2D-conjugated structure10.1021/ma500829r ↗
32. Side chain structure affects the photovoltaic performance of two-dimensional conjugated polymers10.1021/ma401897b ↗
33. Thiophene π bridge effect on bulky side‐chained benzodithiophene‐based photovoltaic polymers10.1002/pola.28017 ↗
34. Hyperconjugated side chained benzodithiophene and 4, 7-di-2-thienyl-2, 1, 3-benzothiadiazole based polymer for solar cells10.1039/c3py01529g ↗
35. Highly air stable branched octithiophene oligomer for organic field effect transistor and pH sensor applications10.1016/j.matchemphys.2012.12.017 ↗
36. Effect of thiophene spacers in benzodithiophene‐based polymers for organic electronics10.1002/pola.28781 ↗
37. Quinoxaline‐based D‐A conjugated polymers for organic solar cells: probing the effect of quinoxaline side chains and fluorine substitution on the power conversion efficiency10.1002/pola.28483 ↗
38. Dithienopyrrole-benzodithiophene based donor materials for small molecular BHJSCs: impact of side chain and annealing treatment on their photovoltaic properties10.1016/j.orgel.2016.07.003 ↗
39. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
40. Tetrathienoanthracene-based copolymers for efficient solar cells10.1021/ja1110915 ↗
41. Synthesis, optical and electrochemical properties new donor–acceptor (D–A) copolymers based on benzo [1, 2-b: 3, 4-b′: 6, 5-b ″] trithiophene donor and different acceptor units: application as donor for photovoltaic devices10.1016/j.orgel.2014.11.011 ↗
42. Helical polycyclic aromatics containing thiophenes: synthesis and properties10.1016/j.tetlet.2006.01.006 ↗
43. Alternating copolymers of cyclopenta [2, 1‐b; 3, 4‐b′] dithiophene and thieno [3, 4‐c] pyrrole‐4, 6‐dione for high‐performance polymer solar cells10.1002/adfm.201100708 ↗
44. Streamlined microwave-assisted preparation of narrow-bandgap conjugated polymers for high-performance bulk heterojunction solar cells10.1038/nchem.403 ↗
45. Electrochemical properties of luminescent polymers and polymer light-emitting electrochemical cells10.1016/S0379-6779(99)00007-7 ↗
46. Photo- and electroluminescence of ambipolar, high-mobility, donor-acceptor polymers10.1016/j.orgel.2016.02.030 ↗
47. Interlayer modification using eco-friendly glucose-based natural polymers in polymer solar cells10.1021/acssuschemeng.8b03219 ↗
48. 10.8% efficiency polymer solar cells based on PTB7‐Th and PC71BM via binary solvent additives treatment10.1002/adfm.201602181 ↗
49. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
50. Unraveling the morphology of high efficiency polymer solar cells based on the donor polymer PBDTTT‐EFT10.1002/aenm.201401259 ↗
51. Molecular order in high-efficiency polymer/fullerene bulk heterojunction solar cells10.1021/nn202951e ↗
52. Stirring up acceptor phase and controlling morphology via choosing appropriate rigid aryl rings as lever arms in symmetry‐breaking benzodithiophene for high‐performance fullerene and fullerene‐free polymer solar cells10.1002/adma.201705870 ↗