journal article·2022-09Open access

Charge carrier analysis via impedance spectroscopy and the achievement of high performance in CdSe/ZnS:di-[4-(N,N-di-p-tolyl-amino)-phenyl]cyclohexane hybrid quantum dot light-emitting diodes

Dongjin Kim, Ohun Kwon, Mijin Kim, Honyeon Lee

Organic Electronics· Volume 108

Abstract

Despite the importance of charge carrier injection balance for achieving high performance with quantum dot light-emitting diodes (QLEDs), there have been comparatively few relevant studies. Thus, we extensively analyzed charge carrier behaviors of QLEDs using an impedance spectroscopy (IS) method and a QLED-equivalent circuit. This yielded both the capacitive and resistive values of each of the emission layer (EML) and the charge transport layer (CTL), revealing the relationships between these values and device performance. Using this analysis method, we examined the effects of the combination of hybrid quantum dot (QD) EMLs and CTLs on QLED performance. The CdSe/ZnS QD and di-[4-(N,N-di-p-tolyl-amino)-phenyl]cyclohexane blended hybrid QD EML, in combination with the di-[4-(N,N-di-p-tolyl-amino)-phenyl]cyclohexane hole transport layer, produced electron–hole balance in EMLs and resulted in a remarkable improvement in device performance. The maximum current efficiency of a green QLED using this combination was 43.7 cd/A, which was approximately two-fold greater than the maximum current efficiency of a QLED with a conventional CdSe/ZnS QD EML and much better than previously reported values for green QLEDs with CdSe/ZnS-based EMLs. In summary, we have greatly improved QLED performance via charge balance optimization. Herein, we present the methods for this improvement, along with an analysis of carrier behavior.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Semiconductor Quantum Structures and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Whispering-gallery-mode biosensing: label-free detection down to single molecules10.1038/nmeth.1221 ↗
2. Optically pumped colloidal-quantum-dot lasing in LED-like devices with an integrated optical cavity10.1038/s41467-019-14014-3 ↗
3. 1.3 μm room-temperature GaAs-based quantum-dot laser10.1063/1.122534 ↗
4. Quantum dot solar cells10.1016/S1386-9477(02)00374-0 ↗
5. Six-junction III–V solar cells with 47.1% conversion efficiency under 143 Suns concentration10.1038/s41560-020-0598-5 ↗
6. Emergence of colloidal quantum-dot light-emitting technologies10.1038/nphoton.2012.328 ↗
7. Present status and future prospect of quantum dot Technology10.4150/KPMI.2012.19.6.451 ↗
8. Electroluminescence from single monolayers of nanocrystals in molecular organic devices10.1038/nature01217 ↗
9. Full-colour quantum dot displays fabricated by transfer printing10.1038/nphoton.2011.12 ↗
10. Inverted quantum dot light emitting diodes using polyethylenimine ethoxylated modified ZnO10.1038/srep08968 ↗
11. Highly efficient deep blue Cd-free quantum dot light-emitting diodes by a p-type doped emissive layer10.1002/smll.202002109 ↗
12. Li and Mg Co-doped zinc oxide electron transporting layer for highly efficient quantum dot light-emitting diodes10.1021/acsami.8b04721 ↗
13. High-efficiency quantum-dot light-emitting devices with enhanced charge injection10.1038/nphoton.2013.70 ↗
14. Semi-analytical numerical analysis of the core-size and electric-field intensity dependency of the light emission wavelength of CdSe/ZnS quantum dots
15. Controlling the influence of Auger recombination on the performance of quantum-dot light-emitting diodes10.1038/ncomms3661 ↗
16. Improved performance of inverted quantum dot light-emitting diodes by blending the small-molecule and polymer materials as hole transport layer10.1016/j.orgel.2020.105618 ↗
17. Enhanced performances of quantum dot light-emitting diodes with doped emitting layers by manipulating the charge carrier balance10.1039/C7TC01142C ↗
18. Highly efficient and stable InP/ZnSe/ZnS quantum dot light-emitting diodes10.1038/s41586-019-1771-5 ↗
19. Near-band-edge electroluminescence from heavy-metal-free colloidal quantum dots10.1002/adma.201100719 ↗
20. Highly flexible organometal halide perovskite quantum dot based light-emitting diodes on a silver nanowire-polymer composite electrode10.1039/C6TC04934F ↗
21. Improved device performance of solution-processed red-colored Cu–In–Zn–S-based quantum dot light-emitting diodes enabled by doping TCTA into the emitting layer10.1016/j.orgel.2020.105790 ↗
22. Improvement of quantum dot light emitting device characteristics by CdSe/ZnS blended with HMDS (hexamethyldisilazane)10.3390/app10176081 ↗
23. CdSe/ZnS quantum-dot light-emitting diodes with spiro-OMeTAD as buffer layer10.1109/TED.2019.2937788 ↗
24. Efficient exciton generation in atomic passivated CdSe/ZnS quantum dots light-emitting devices10.1038/srep34659 ↗
25. The work mechanism and sub-bandgap-voltage electroluminescence in inverted quantum dot light-emitting diodes10.1038/srep06974 ↗
26. Stable and efficient quantum-dot light-emitting diodes based on solution-processed multilayer structures10.1038/nphoton.2011.171 ↗
27. Efficient red/green/blue tandem quantum-dot light-emitting diodes with external quantum efficiency exceeding 2110.1021/acsnano.7b07867 ↗
28. A highly efficient quantum dot light emitting diode: via improving the carrier balance by modulating the hole transport10.1039/C7RA08302E ↗
29. Highly efficient and fully solution-processed inverted light-emitting diodes with charge control interlayers10.1021/acsami.8b05092 ↗
30. Ultrastable quantum-dot light-emitting diodes by suppression of leakage current and exciton quenching processes10.1021/acsami.6b09246 ↗
31. Quantization of multiparticle Auger rates in semiconductor quantum dots10.1126/science.287.5455.1011 ↗
32. Suppressed auger recombination in “Giant” nanocrystals boosts optical gain performance10.1021/nl901681d ↗
33. Recent progress in high-luminance quantum dot light-emitting diodes
34. Solvent resistant hole-transporting thin films via diacetylene cross-linking and their applications in solution-processed QLEDs10.1021/acsapm.0c00427 ↗
35. Approaches to high performance white organic light-emitting diodes for general lighting10.1039/C6QM00365F ↗
36. Over 800% efficiency enhancement of all-inorganic quantum-dot light emitting diodes with an ultrathin alumina passivating layer10.1039/C8NR01460D ↗
37. Improving the charge balance and performance of CdSe/ZnS quantum-dot light-emitting diodes with a sputtered zinc-tin-oxide electron-transport layer and a thermally evaporated tungsten-oxide charge-restricting layer10.7567/1347-4065/ab3c77 ↗
38. Solution-processed, high-performance light-emitting diodes based on quantum dots10.1038/nature13829 ↗
39. Investigation of luminance degradation in organic light-emitting diodes by impedance spectroscopy10.1109/LPT.2018.2838099 ↗
40. Blue organic light-emitting diodes with 2-methyl-9,10-bis(naphthalen-2-yl)anthracene as hole transport and emitting layer and the impedance spectroscopy analysis10.1016/j.cap.2014.08.021 ↗
41. Impedance measurements on QLED devices: analysis of high-frequency loop in terms of material properties10.1007/s10008-020-04765-1 ↗
42. Optimization of the electron transport layer in quantum dot light-emitting devices
43. Meta-analysis of cellular toxicity for cadmium-containing quantum dots10.1038/nnano.2015.338 ↗
44. Efficient multiple triplet quantum well structures in organic light-emitting devices10.1063/1.3224190 ↗
45. Visible quantum dot light-emitting diodes with simultaneous high brightness and efficiency10.1038/s41566-019-0364-z ↗
46. Negative capacitance in light-emitting devices10.1016/j.sse.2009.01.002 ↗
47. Equivalent circuit of quantum-dot LED and acquisition of carrier lifetime in active layer10.1109/LED.2019.2954326 ↗
48. Steering the properties of MoOx hole transporting layers in OPVs and OLEDs: interface morphology vs. Electronic structure10.3390/ma10020123 ↗
49. Transport mechanisms in silicon heterojunction solar cells with molybdenum oxide as a hole transport layer10.1016/j.solmat.2018.05.019 ↗
50. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
51. Energetics of molecular interfaces10.1016/S1369-7021(05)70985-8 ↗
52. Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy10.1063/1.116313 ↗
53. Material and device engineering for high-performance blue quantum dot light-emitting diodes10.1039/D0NR02074E ↗
54. High-performance tandem CdSe/ZnS quantum-dot light-emitting diodes with a double-layer interconnecting layer composed of thermally evaporated and sputtered metal oxides
55. Bright colloidal quantum dot light-emitting diodes enabled by efficient chlorination10.1038/s41566-018-0105-8 ↗
56. Boosting the performance of solution-processed quantum dots light-emitting diodes by a hybrid emissive layer via doping small molecule hole transport materials into quantum dots10.1016/j.orgel.2021.106344 ↗
57. Equivalent circuit of quantum-dot LED and acquisition of carrier lifetime in active layer10.1109/LED.2019.2954326 ↗