journal article·2020-06

Comparing build architecture and electrolyte of ITO-free flexible patterned organic screen-printed ECDs based on a novel PEDOT:PSS compound film post-treated with strong and weak organic acids

Guodong Liu, Yu Liu, Meiyun Zhang, Zhenhua Yang, Patrick Gane

Publisher page

Abstract

Abstract Poly(3,4-ethylenedioxythiophene) (PEDOT), a common constituent material used in the preparation of electrochromic devices (ECDs) when doped with the polymer anion poly(styrenesulfonate) (PSS), can also be used to form an electrode layer. Patterned ECDs may thus be fabricated by conventional spin-coating. Due to high wastage and low productivity in spin coating, the demand for low-cost ECDs is difficult to meet. The alternative use of screen printing, however, results in a major challenge due to difficulty in achieving the necessary continuity of the applied print and of the subsequent film forming uniformity when using standard PEDOT:PSS dispersion alone. The film forming property of PEDOT:PSS is shown here to be improved by dispersing in a water methanol mix to form a novel PEDOT:PSS-solvent compound, which, when combined together with the high boiling solvent dimethyl sulfoxide (DMSO) and a thickening binder solution of polyvinyl alcohol (PVOH), allows screen printing to perform well. The sheet conductivity of the printed PEDOT:PSS compound film is then further increased by studying post-treatment using strong and weak organic acids, illustrated by comparing p-toluenesulfonic acid (tosylic acid (PTSA)) with glacial acetic acid (CH3COOH (HOAc)) or oxalic acid (OA), respectively, over a range of concentration. In this way, the optimal processing concentration of acid is accordingly obtained to minimize sheet resistance. Screen printed patterned ECDs, based on the post-treated PEDOT:PSS compound electrochromic and electrode films using the optimal acid concentrations, were printed including electrolyte layers, were evaluated. Performance of lateral versus vertical ECD build architecture in respect to chromatic aberration, working voltage, time response, ion mobility in electrolyte type (gel/solution), absorbance at color-switching, as well as mechanical stability during repeated bending, was assessed. The optima of chromatic aberration and absorbance at color-switching were found to coincide with minimal sheet resistance of the novel PEDOT:PSS compound films. Almost equivalent sheet resistance was obtained with both PTSA and HOAc, each at optimal treatment dosage, showing newly that the weak organic acid post-treatment provides an equivalent effect in comparison with strong organic acid if used at sufficient concentration. Furthermore, the electrochromic performance of the experimentally prepared ECDs was shown to be close to the level obtained from conventional indium-tin oxide (ITO)-based ECDs, and retained stable performance for color-switching after repeated bending of 1 000 times.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. ITO-free solution-processed flexible electrochromic devices based on PEDOT: PSS as transparent conducting electrode10.1021/acsami.6b09476 ↗
2. Matched-dual-polymer electrochromic lenses, using new cathodically coloring conducting polymers, with exceptional performance and incorporated into automated sunglasses10.1002/app.41043 ↗
3. Patternable PEDOT nanofilms with grid electrodes for transparent electrochromic devices targeting thermal camouflage10.1186/s40580-015-0051-9 ↗
4. Variable-emittance infrared electrochromic skins combining unique conducting polymers, ionic liquid electrolytes, microporous polymer membranes, and semiconductor/polymer coatings, for spacecraft thermal control10.1002/app.40850 ↗
5. Diffuse color patterning using blended electrochromic polymers for proof-of-concept adaptive camouflage plaques10.1002/app.42158 ↗
6. Solution-processed poly(3,4-ethylenedioxythiophene) thin films as transparent conductors: effect of p-toluenesulfonic acid in dimethyl sulfoxide10.1021/am504150n ↗
7. Metal nanowire networks: the next generation of transparent conductors10.1002/adma.201402710 ↗
8. Performance enhancement of metal nanowire transparent conducting electrodes by mesoscale metal wires10.1038/ncomms3522 ↗
9. Solution processable nanocarbon platform for polymer solar cells10.1039/c1ee01333e ↗
10. Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics10.1021/nn901587x ↗
11. Highly conductive poly (3, 4-ethylenedioxythiophene): poly (styrene sulfonate) films treated with an amphiphilic fluoro compound as the transparent electrode of polymer solar cells10.1039/C1EE02475B ↗
12. Transparent electrodes based on conducting polymers for display applications10.1016/j.displa.2013.05.003 ↗
13. Conductivity of PEDOT: PSS on spin-coated and drop cast nanofibrillar cellulose thin films10.1186/s11671-015-1093-y ↗
14. “Secondary doping” methods to significantly enhance the conductivity of PEDOT: PSS for its application as transparent electrode of optoelectronic devices10.1016/j.displa.2013.08.007 ↗
15. Highly conductive and transparent PEDOT: PSS films with a fluorosurfactant for stretchable and flexible transparent electrodes10.1002/adfm.201101775 ↗
16. Review on application of PEDOTs and PEDOT: PSS in energy conversion and storage devices10.1007/s10854-015-2895-5 ↗
17. Screen printed PEDOT: PSS films as transparent electrode and its application in organic solar cells on opaque substrates10.1007/s10854-018-9185-y ↗
18. Screen-printed poly (3,4-Ethylenedioxythiophene):poly(Styrenesulfonate) grids as ITO-free anodes for flexible organic light-emitting diodes10.1002/adfm.201705955 ↗
19. ITO-free, fully solution processed transparent organic light-emitting electrochemical cells on thin glass
20. Highly conductive PEDOT: PSS nanofibrils induced by solution-processed crystallization10.1002/adma.201304611 ↗
21. Spray coated high-conductivity PEDOT:PSS transparent electrodes for stretchable and mechanically-robust organic solar cells10.1016/j.solmat.2012.09.005 ↗
22. A simple strategy for high stretchable, flexible and conductive polymer films based on PEDOT:PSS –PDMS blends10.1016/j.orgel.2019.105451 ↗
23. High performance, flexible polymer light-emitting diodes (PLEDs) with gravure contact printed hole injection and light emitting layers10.1016/j.orgel.2010.03.010 ↗
24. Preventing the coffee-ring effect and aggregate sedimentation by in situ gelation of monodisperse materials10.1039/C8SC03302A ↗
25. Electrospun PEDOT: PSS–PVA nanofiber based ultrahigh-strain sensors with controllable electrical conductivity10.1039/c1jm14491j ↗
26. Water-soluble conductive composite binder containing PEDOT:PSS as conduction promoting agent for Si anode of lithium-ion batteries10.1002/celc.201402210 ↗
27. Fabrication of highly conductive porous cellulose/PEDOT:PSS nanocomposite paper via post-treatment10.3390/nano9040612 ↗
28. Step toward robust and reliable amorphous polymer field-effect transistors and logic functions made by the use of roll to roll compatible printing processes10.1016/j.orgel.2009.11.027 ↗
29. Highly conductive PEDOT: PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells10.1039/c2ee22595f ↗
30. Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices10.1002/adma.201104795 ↗
31. Solution-processed PEDOT: PSS films with conductivities as indium tin oxide through a treatment with mild and weak organic acids10.1021/am404113n ↗
32. Improved thermoelectric properties of PEDOT:PSS nanofilms treated with oxalic acid10.1007/s11664-014-3557-8 ↗
33. Effective treatment methods on PEDOT:PSS to enhance its thermoelectric performance10.1016/j.synthmet.2016.11.011 ↗
34. Switchable diffractive optics using patterned PEDOT:PSS based electrochromic thin-films10.1016/j.orgel.2016.07.004 ↗
35. Active matrix displays based on all-organic electrochemical smart pixels printed on paper10.1002/1521-4095(20021016)14:20<1460::AID-ADMA1460>3.0.CO;2-S ↗
36. Increasing the electrical conductivity of electrochromic PEDOT:PSS films – a comparative study10.1016/j.solmat.2015.10.001 ↗