journal article·2019-02

Highly improved photocurrent and stability of dye-sensitized solar cell through quasi-solid-state electrolyte formed by two low molecular mass organogelators

Li Tao, Wei Zhang, Zhiyuan Wang, Hao Wang, Jun Zhang, Zhipeng Huo, Songyuan Dai, Tasawar Hayat, Njud S. Alharbi

Publisher page

Abstract

Abstract A well-organized quasi-solid-state electrolyte is formed by binary mixtures of bisamide and valine as co-gelator via intermolecular hydrogen bonds. It is interesting that the ratio of the two components of quasi-solid-state electrolyte can be tuned to shift the position of TiO2 conduction band edge, which can obviously enhance the driving force of electron injection process. Consequently, compared with the liquid electrolyte based dye-sensitized solar cell DSSC, the short-circuit current density (Jsc) of solar cellassembled by this quasi-solid-state electrolyte is increased about 12%. Moreover, the intensity-modulated photocurrent spectroscopy/intensity-modulated photovoltage spectroscopy (IMPS/IMVS) and electrochemical impedance spectroscopy (EIS) are carried out to investigate the influences of gelation on the kinetic processes of electron transport and recombination in DSSC. It is found that with the increasing of valine, the 3D network of quasi-solid-state electrolyte becomes looser and the electron transportation process is accelerated, meanwhile, the electron recombination lifetime is prolonged. As result, the quasi-solid-state solar cells (QS-DSSCs) employed with the bi-component quasi-solid-state electrolytes obtained a higher efficiency of 6.1% at AM 1.5 (100 mW cm2), but the efficiency of QS-DSSC based on the unitary component quasi-solid-state electrolyte formed by bisamide is only 5.3%. More importantly, these QS-DSSCs exhibit more excellent photo-thermal stability than the liquid electrolyte based DSSC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supramolecular Self-Assembly in Materials · Polydiacetylene-based materials and applications · Photochromic and Fluorescence Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A low-cost, high-efficiency solar-cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Highly-efficient dye-sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes10.1039/C5CC06759F ↗
3. Interfacial effects in solid-liquid electrolytes for improved stability and performance of dye-sensitized solar cells10.1021/acsami.7b11899 ↗
4. Hydrothermal growth of one-dimensional Ce-doped TiO2 nanostructures for solid-state DSSCs comprising Mg-doped CuCrO210.1007/s10853-016-0348-z ↗
5. 11% efficiency solid-state dye-sensitized solar cells with copper(II/I) hole transport materials10.1038/ncomms15390 ↗
6. Solvothermal synthesis of hierarchical TiO2 microstructures with high crystallinity and superior light scattering for high-performance dye-sensitized solar cells10.1021/acsami.7b07321 ↗
7. A stable and efficient quasi-solid-state dye-sensitized solar cell with a low molecular weight organic gelator10.1039/c2ee03128k ↗
8. A quasi-solid state DSSC with 10.1% efficiency through molecular design of the charge-separation and -transport10.1038/srep28022 ↗
9. Gel electrolytes with polyamidopyridine dendron modified talc for dye-sensitized solar cells10.1021/acsami.7b00897 ↗
10. Bifacial quasi-solid-state dye-sensitized solar cells with Poly (vinyl pyrrolidone)/polyaniline transparent counter electrode10.1016/j.nanoen.2016.05.010 ↗
11. Enhanced ionic mobility and increased efficiency of dye-sensitized solar cell by adding lithium chloride in poly(vinylidene fluoride) nanofiber as electrolyte medium10.1007/s10853-017-1473-z ↗
12. Engineering of tough double network hydrogels10.1002/macp.201600038 ↗
13. Effect of the self-assembled gel network formed from a low molecular mass organogelator on the electron kinetics in quasi-solid-state dye-sensitized solar cells10.1007/s40843-016-5092-x ↗
14. Effect of alkyl chain length of imidazolium cations on the electron transport and recombination kinetics in ionic gel electrolytes based quasi-solid-state dye-sensitized solar cells10.1016/j.electacta.2015.04.007 ↗
15. High-efficiency and stable quasi-solid-state dye-sensitized solar cell based on low molecular mass organogelator electrolyte10.1039/C4TA06188H ↗
16. Gel electrolyte materials formed from a series of novel low molecular mass organogelators for stable quasi-solid-state dye-sensitized solar cells10.1039/C4TA02895C ↗
17. Low molecular mass gelators of organic liquids and the properties of their gels10.1021/cr9700282 ↗
18. Effect of an adsorbent on recombination and band-edge movement in dye-sensitized TiO2 solar cells: evidence for surface passivation10.1021/jp0607364 ↗
19. Influence of 4-tert-butylpyridine/guanidinium thiocyanate co-additives on band edge shift and recombination of dye-sensitized solar cells: experimental and theoretical aspects10.1016/j.electacta.2015.10.103 ↗
20. Stable quasi-solid-state dye-sensitized solar cells using novel low molecular mass organogelators and room-temperature molten salts10.1021/jp412717y ↗
21. Biopolymer electrolytes based on blend of kappa-carrageenan and cellulose derivatives for potential application in dye sensitized solar cell10.1016/j.electacta.2015.02.153 ↗
22. Highly efficient plastic-based quasi-solid-state dye-sensitized solar cells with light-harvesting mesoporous silica nanoparticles gel-electrolyte10.1016/j.jpowsour.2013.06.142 ↗
23. High performance dye-sensitized solar cells with enhanced light-harvesting efficiency based on polyvinylpyrrolidone-coated Au-TiO2 microspheres10.1002/cssc.201501562 ↗
24. TiO2 microspheres with controllable surface area and porosity for enhanced light harvesting and electrolyte diffusion in dye-sensitized solar cells10.1002/adfm.201502224 ↗
25. Quasi-solid-state dye sensitized solar cells using supramolecular gel electrolyte formed from two-component low molecular mass organogelators10.1007/s40843-015-0060-3 ↗
26. New benzothiadiazole-based dyes incorporating dithieno 3,2-b:2',3'-d pyrrole (DTP) pi-linker for dye-sensitized solar cells with different electrolytes10.1016/j.jpowsour.2016.09.141 ↗
27. An efficient organogelator for ionic liquids to prepare stable quasi-solid-state dye-sensitized solar cells10.1039/B604021G ↗
28. Quasi-solid-state dye sensitized solar cells with 1,3:2,4-di-O-benzylidene-d-sorbitol derivatives as low molecular weight organic gelators10.1039/B402324B ↗
29. A temperature-responsive poly(vinyl alcohol) gel for controlling fluidity of an inorganic phase change material10.1039/C7TA02897K ↗
30. A study of the hydration of the alkali metal ions in aqueous solution10.1021/ic2018693 ↗
31. Poly(ethylene oxide) polymer matrix coupled with urea as gel electrolyte for dye sensitized solar cell applications10.1016/j.synthmet.2017.01.014 ↗
32. Morphology, ionic diffusion and applicability of novel polymer gel electrolytes with LiI/I-210.1039/B515113A ↗
33. Cooperative effect of adsorbed cations and iodide on the interception of back electron transfer in the dye sensitization of nanocrystalline TiO210.1021/jp9934477 ↗
34. Transport-limited recombination of photocarriers in dye-sensitized nanocrystalline TiO2 solar cells10.1021/jp0304475 ↗
35. Cation exchange at semiconducting oxide surfaces: origin of light-induced performance increases in porphyrin dye-sensitized solar cells10.1021/jp3067712 ↗
36. The role of insulating oxides in blocking the charge Carrier recombination in dye- sensitized solar cells10.1002/adfm.201302352 ↗
37. Band edge movement in dye sensitized Sm-doped TiO2 solar cells: a study by variable temperature spectroelectrochemistry10.1039/C5RA15815J ↗