Structural and room temperature gas sensing properties of polyaniline/titania nanocomposite
Source abstract
Abstract
Abstract Polyaniline-emeraldine (PE) and polyaniline/titania nanocomposites (PTNs) were prepared using an in-situ self-assembly chemical oxidative polymerization of aniline monomers in the absence and presence of different wt% of titania (TiO2) nanoparticles, respectively. The structural and morphological properties of the PE and PTNs were evaluated by X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. Moreover, PE and PTNs were deposited on an epoxy glass substrate with finger type Cu-interdigited electrodes as liquefied petroleum gas (LPG) sensor. A PTN sensor with 40 wt% TiO2 nanoparticles was exhibited the response value and the response/recovery time of 43.2% and 76/95 s, respectively, toward 0.4 vol% LPG concentration. Our handmade sensor exhibited excellent reproducibility and stability in period of 16 weeks with a small degradation of about 7%. The results of the sensing for different gases were revealed the sensor has an excellent selectivity to LPG gas. Furthermore, the factors affecting LPG sensing performance and plausible gas sensing mechanism are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Enhancing the heavy load performance of a gasoline engine converted for LPG use by modifying the ignition timings10.1016/j.applthermaleng.2015.03.076 ↗
2. Alexander · 2012
3. Room temperature liquefied petroleum gas (LPG) sensor10.1016/j.snb.2010.02.063 ↗
4. Liquefied petroleum gas (LPG) sensing using spray deposited Cu2ZnSnS4 thin film10.1016/j.jaap.2015.11.001 ↗
5. Synthesis and characterization of perovskite barium titanate thin film and its application as LPG sensor10.1016/j.snb.2016.10.018 ↗
6. Influence of Pd doping on morphology and LPG response of SnO210.1016/j.snb.2007.12.055 ↗
7. Room temperature liquefied petroleum gas (LPG) sensor based on p-polyaniline/n-TiO2 heterojunction10.1016/j.snb.2008.07.003 ↗
8. Sprayed CdIn2O4 thin films for liquefied petroleum gas (LPG) detection10.1016/j.snb.2011.03.013 ↗
9. Nickel doped spray pyrolyzed nanostructured TiO2 thin films for LPG gas sensing10.1016/j.snb.2012.08.030 ↗
10. Sensors based on porous Pd-doped hematic (α-Fe2O3) for LPG detection10.1016/j.micromeso.2013.11.014 ↗
11. Combustion synthesis of magnesium ferrite as liquid petroleum gas (LPG) sensor: effect of sintering temperature10.1016/j.cap.2011.06.029 ↗
12. Morphology evolution of ZnO thin films from aqueous solutions and their application to liquefied petroleum gas (LPG) sensor10.1016/j.jallcom.2012.01.082 ↗
13. Effect of long term ageing under humid environment on the LPG sensing properties and the surface composition of Mg-doped SnO2 thin film10.1016/j.ceramint.2016.01.155 ↗
14. Improved response of CdO nanorods towards liquefied petroleum gas (LPG): effect of Pd sensitization10.1016/j.snb.2008.10.048 ↗
15. Development of nanocrystalline CrNbO4 based p-type semiconducting gas sensor for LPG, Ethanol and ammonia10.1016/j.snb.2012.04.002 ↗
16. Liquefied petroleum gas (LPG) sensing performance of electron beam irradiated chemically deposited TiO2 thin films10.1016/j.snb.2009.06.025 ↗
17. Selective gas sensing response from different loading of Ag in sol-gel mesoporous titania powders10.1016/j.snb.2011.06.058 ↗
18. Printed hydrogen sulfide gas sensor on paper substrate based on polyaniline composite10.1016/j.tsf.2013.02.055 ↗
19. Fabrication and performance of polypyrrole (ppy)/TiO2 heterojunction for room temperature operated LPG sensor10.1016/j.snb.2013.01.056 ↗
20. Fabrication of n-CdTe/p-polyaniline heterojunction-based room temperature LPG sensor10.1016/j.snb.2008.01.059 ↗
21. Design, fabrication, and characterization of low-power gas sensors based on organic-inorganic nano-composite10.1016/j.orgel.2016.12.050 ↗
22. Room temperature LPG sensor based on n-CdS/p-polyaniline heterojunction10.1016/j.snb.2009.11.063 ↗
23. A room temperature liquefied petroleum gas sensor based on all-electrodeposited n-CdSe/p-polyaniline junction10.1016/j.snb.2006.08.023 ↗
24. Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications10.1021/cr0500535 ↗
25. Hydrogen gas sensing based on polyaniline/anatase titania nanocomposite10.1016/j.ijhydene.2013.09.152 ↗
26. Effect of different titania phases on the hydrogen gas sensing features of polyaniline/TiO2 nanocomposite10.1016/j.polymer.2014.02.030 ↗
27. Synthesis of tin oxide thick film and its investigation as a LPG sensor at room temperature10.4236/jst.2012.23015 ↗
28. Development of polyaniline/Cu2ZnSnS4 (CZTS) thin film based heterostructure as room temperature LPG sensor10.1016/j.sna.2012.12.022 ↗
29. Highly selective gas sensors from photo-activated ZnO/PANI thin films synthesized by mSILAR10.1016/j.synthmet.2017.08.006 ↗
30. 2013
31. ZnO assisted polyaniline nanofibers and its application as ammonia gas sensor10.1016/j.snb.2013.09.106 ↗
32. Sensing characteristics of tin-doped ZnO thin films as NO2 gas sensor10.1016/j.snb.2004.10.030 ↗