Highly efficient all solid state dye-sensitized solar cells by the specific interaction of CuI with NCS groups
Source abstract
Abstract
Abstract Highly efficient all solid state dye-sensitized solar cells (DSSC) were fabricated by the specific interaction of CuI with the NCS groups of the dye molecules and that of the counter electrodes. The counter electrode containing NCS groups was prepared by coating the PEG solution containing NCS groups. The counter electrode was connected with the NCS groups of the dye molecules by CuI. The specific interaction between the CuI with the NCS groups of the dye molecules and that of the counter electrode could lower the impedance of the interfaces, and facilitate the injection of the hole into the counter electrode to give the highly efficient all solid state DSSC. The specific interaction was investigated by X-ray photoelectron spectroscopy. The performance was improved by introducing PEDOT layer between the interface of FTO and the PEG containing NCS groups. The improvements are due to the reduction of the junction resistance across the interface in the presence of interlayer, which result in improved hole injection. The DSSC were stable and exhibited high efficiency (4.2%). They could be manufactured with inexpensive and low quality materials, and the practical use is promising.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Conversion of light to electricity by cis-X2Bis(2, 2′-bipyridyl-4, 4′-dicarboxylate)ruthenium(II) charge-transfer sensitizers (XCl-, Br-, I−, CN−, and SCN−) on nanocrystalline TiO2 electrodes10.1021/ja00067a063 ↗
3. Light-induced redox reactions in nanocrystalline systems10.1021/cr00033a003 ↗
4. Fabrication of solid-state dye-sensitized Tio2 solar cell using polymer electrolyte10.1246/bcsj.74.387 ↗
5. Macromolecules in ionic liquids: progress, challenges, and opportunities10.1021/ma800171k ↗
6. New insights into dye-sensitized solar cells with polymer electrolytes10.1039/b900928k ↗
7. A dye sensitized TiO2 photoelectrochemical cell constructed with polymer solid electrolyte10.1016/0167-2738(96)00347-5 ↗
8. Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies10.1038/26936 ↗
9. Poly(4-undecyl-2, 2′-bithiophene) as a hole conductor in solid state dye sensitized titanium dioxide solar cells10.1016/S0379-6779(00)00650-0 ↗
10. High efficiency solid-state photovoltaic device due to inhibition of interface charge recombination10.1063/1.1406148 ↗
11. Solid state dye-sensitized tio2 solar cell with polypyrrole as hole transport layer10.1246/cl.1997.471 ↗
12. Electron transport analysis for improvement of solid-state dye-sensitized solar cells using poly(3, 4-ethylenedioxythiophene) as hole conductors10.1021/jp064439a ↗
13. Influence of doped anions on poly(3, 4-ethylenedioxythiophene) as hole conductors for iodine-free solid-state dye-sensitized solar cells10.1021/ja075704o ↗
14. Solid-state dye-sensitized solar cell with p-type NiO as a hole collector10.1016/j.solmat.2004.05.010 ↗
15. Efficient dye-sensitized charge separation in a wide-band-gap p–n heterojunction10.1063/1.363412 ↗
16. Electrodeposited nanocomposite n–p heterojunctions for solid-state dye-sensitized photovoltaics10.1002/1521-4095(200009)12:17<1263::AID-ADMA1263>3.0.CO;2-T ↗
17. Dye-sensitized solar cell with the hole collector p-CuSCN deposited from a solution in n-propyl sulphide10.1016/S0927-0248(01)00027-7 ↗
18. A dye-sensitized nano-porous solid-state photovoltaic cell10.1088/0268-1242/10/12/020 ↗
19. A solid-state photovoltaic cell sensitized with a ruthenium bipyridyl complex10.1088/0022-3727/31/12/014 ↗
20. Dye-sensitized solid-state solar cells: use of crystal growth inhibitors for deposition of the hole collector10.1021/cm011595f ↗
21. On the photo-degradation of dye sensitized solid-state TiO2|dye|CuI cells10.1088/0268-1242/18/7/320 ↗
22. Recombination processes in dye-sensitized solid-state solar cells with CuI as the hole collector10.1016/S0927-0248(03)00103-X ↗
23. Dye-sensitized solid-state photovoltaic cells: suppression of electron-hole recombination by deposition of the dye on a thin insulating film in contact with a semiconductor10.1007/BF02657723 ↗
24. Slow interfacial charge recombination in solid-state dye-sensitized solar cell using Al2O3-coated nanoporous TiO2 films10.1016/j.solmat.2003.11.005 ↗
25. A. Fujishima, X.-T. Zhang, Solid-state dye-sensitized solar cells, Proc. Japan Acad. 81(B) (2005) 33–42.10.2183/pjab.81.33 ↗
26. Fabrication of an efficient solid-state dye-sensitized solar cell10.1021/la026832n ↗
27. Fabrication of dye-sensitized solar cells using triethylamine hydrothiocyanate as a CuI crystal growth inhibitor10.1021/la020421p ↗
28. Flexible and compressible Goretex−PEDOT membrane electrodes for solid-state dye-sensitized solar cells10.1021/la903507m ↗
29. Photoelectron spectroscopy studies of Ru(dcbpyH2)2(NCS)2/CuI and Ru(dcbpyH2)2(NCS)2/CuSCN interfaces for solar cell applications10.1021/jp037905u ↗
30. Interfacial properties of the nanostructured dye-sensitized solid heterojunction TiO2/RuL2(NCS)2/CuI10.1063/1.1739399 ↗
31. Enhancement of photovoltaic characteristics using a PEDOT interlayer in TiO2/MEHPPV heterojunction devices
32. Molecular organic light-emitting diodes using highly conducting polymers as anodes10.1063/1.1480100 ↗
33. Unique TiO2 paste for high efficiency dye-sensitized solar cells10.1016/j.solmat.2008.11.012 ↗
34. Solid-state and flexible dye-sensitized Tio2 solar cells: a study by electrochemical impedance spectroscopy10.1021/jp014456u ↗
35. Hoshikawa · Ceram. Japan · 2004 · 39 · 455
36. Effects of electrolyte in dye-sensitized solar cells and evaluation by impedance spectroscopy10.1016/j.electacta.2006.01.053 ↗
37. Polymer gate dielectrics and conducting-polymer contactsfor high-performance organic thin-film transistors10.1002/1521-4095(20021203)14:23<1717::AID-ADMA1717>3.0.CO;2-G ↗