journal article·2014-01

Demonstration of inkjet-printed silver nanoparticle microstrip lines on alumina for RF power modules

Vittorio Camarchia, Alessandro Chiolerio, Marco Cotto, Jie Fang, Giovanni Ghione, Paolo Pandolfi, Marco Pirola, Roberto Quaglia, Chiara Ramella

Organic Electronics· Volume 15· Issue 1
Publisher page

Abstract

The paper shows the application of direct inkjet printing on alumina for fast-prototyping of high frequency circuits, adopting inks based on polymer–silver nanocomposite. Modeling, design, fabrication and experimental characterization of different microwave testing structures is presented and discussed. The integration of soldered surface mount devices and ground connections through wrap-around is successfully exploited. A 4 W power amplifier operating in the 0.7–1 GHz band (35% fractional bandwidth), is designed, fabricated and characterized, demonstrating the feasibility of the adopted approach.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Inkjet printing and low power laser annealing of silver nanoparticle traces for the realization of low resistivity lines for flexible electronics10.1016/j.mee.2010.12.099 ↗
2. B. Shao, R. Weerasekera, L.-R. Zheng, R. Liu, W. Zapka, P. Lindberg, High frequency characterization of inkjet printed coplanar waveguides, in: Workshop on Signal Propagation on Interconnects, 2008, pp. 1–4.10.1109/SPI.2008.4558383 ↗
3. O. Azucena, J. Kubby, D. Scarbrough, C. Goldsmith, Inkjet printing of passive microwave circuitry, in: Microwave Symposium Digest, 2008, pp. 1075–1078.10.1109/MWSYM.2008.4633242 ↗
4. R. Moro, M. Bozzi, S. Kim, M. Tentzeris, Novel inkjet-printed Substrate Integrated Waveguide (SIW) structures on low-cost materials for wearable applications, in: European Microwave Integrated Circuits Conference, 2012, pp. 72–75.10.23919/EuMC.2012.6459165 ↗
5. RFID tag and RF structures on a paper substrate using inkjet-printing technology10.1109/TMTT.2007.909886 ↗
6. Progress towards the first wireless sensor networks consisting of inkjet-printed, paper-based RFID-enabled sensor tags10.1109/JPROC.2010.2049622 ↗
7. Ag nanoparticle-based inkjet printed planar transmission lines for RF and microwave applications: considerations on ink composition, nanoparticle size distribution and sintering time10.1016/j.mee.2012.03.036 ↗
8. Ink-jet printed line morphologies and temperature control of the coffee-ring effect10.1021/la7026847 ↗
9. High-quality ink-jet printed multilevel interconnects and inductive components on plastic for ultra-low-cost RFID applications
10. Low-temperature sintered conductive silver patterns obtained by inkjet printing for plastic electronics10.1002/sia.3229 ↗
11. Nanoparticle-based, spray-coated silver top contacts for efficient polymer solar cells10.1016/j.orgel.2009.03.006 ↗
12. Organic integrated circuits using room-temperature sintered silver nanoparticles as printed electrodes10.1016/j.orgel.2012.09.028 ↗
13. Photonic sintering of inkjet printed current collecting grids for organic solar cell applications10.1016/j.orgel.2012.10.012 ↗
14. Formulas for the skin effect10.1109/JRPROC.1942.232015 ↗
15. Accurate model for effective dielectric constant of microstrip and validity up in millimeter-wave frequencies10.1049/el:19820186 ↗
16. Microwave measurements Part I: Linear measurements10.1109/MIM.2007.364959 ↗
17. G. Ghione, M. Goano, G. Madonna, C. Omegna, M. Pirola, S. Bosso, D. Frassati, A. Perasso, Microwave modeling and characterization of thick coplanar waveguides on oxide-coated lithium niobate substrates for electro-optical applications, in: IEEE International Microwave Symposium Digest, vol. 3, 1999, pp. 1007–1010.10.1109/22.808972 ↗
18. E.O. Hammerstad, F. Bekkadal, A Microstrip Handbook, ELAB Report STF 44A74169, University of Trondheim, Norway, 1975.
19. Effect of surface roughness on eddy current losses at microwave frequencies10.1063/1.1698368 ↗
20. Multigigahertz causal transmission line modeling methodology using a 3-D hemispherical surface roughness approach10.1109/TMTT.2007.910076 ↗
21. S. Sundstroem, Stripline Models with Conductor Surface Roughness, Master of Science Thesis, Helsinki University of Technology, Finland, February 2004.
22. M. Koledintseva, A. Razmadze, A. Gafarov, Soumya De, J. Drewniak, S. Hinaga, PCB Conductor Surface Roughness as a Layer with Effective Material Parameters, 2012 IEEE International Symposium on Electromagnetic Compatibility (EMC), 6–10 August 2012, pp. 138–143.10.1109/ISEMC.2012.6351795 ↗
23. Development of single-stage and Doherty GaN-based hybrid RF power amplifiers for quasi-constant envelope and high peak to average power ratio wireless standards10.1002/mop.26459 ↗
24. S. Cripps, RF Power Amplifiers for Wireless Communications, Ser. Artech House Microwave Library. Artech House, 2006.
25. Colantonio · 2009
26. Microwave measurements – Part II Non-linear measurements10.1109/MIM.2007.4284255 ↗