Balanced shelf and operational stability of the PM6:Y6 solar cells by using ZnO:PEI composite electron transporting layer
Source abstract
Abstract
Abstract The operational stability under continuous illumination and the shelf stability in air are all important for the real application of the organic solar cells (OSCs). In this work, we investigated the influence of the commonly used electron transporting layer (ETL), i. e. ZnO and polyethyleneimine (PEI) on the shelf and operational stability of the PM6:Y6 OSCs. Due to the photocatalysis effect of ZnO, the operational stability of ZnO ETL-based device is worse than the PEI ETL-based device. Due to the hygroscopicity of PEI, the shelf stability of the PEI ETL-based device is worse than the ZnO ETL-based device. By using a ZnO:PEI composite ETL, a balanced shelf and operational stability was obtained. For the inverted PM6: Y6 solar cells, the device could remain 80% and 60% of the initial efficiency after 1200 h continuous illumination, and storage in air for 1500 h, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. All slot-die coated non-fullerene organic solar cells with PCE 11%10.1002/adfm.202009996 ↗
2. Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces10.1073/pnas.1919769117 ↗
3. Nonfullerene acceptors for semitransparent organic solar cells10.1002/aenm.201800002 ↗
4. 18% efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
5. Progress in stability of organic solar cells10.1002/advs.201903259 ↗
6. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
7. Interlayers for non-fullerene based polymer solar cells: distinctive features and challenges10.1039/D0EE02503H ↗
8. Interfacial modification in organic and perovskite solar cells10.1002/adma.201805708 ↗
9. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
10. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO Film as an electron transport layer10.1002/adma.201004301 ↗
11. Photocatalytic effect of ZnO on the stability of nonfullerene acceptors and its mitigation by SnO2 for nonfullerene organic solar cells10.1039/C9MH00379G ↗
12. Visible light-induced degradation of Inverted polymer:nonfullerene acceptor solar cells: initiated by the light absorption of ZnO Layer10.1002/solr.202000638 ↗
13. Incorporation of silver and gold nanostructures for performance improvement in P3HT:PCBM inverted solar cell with rGO/ZnO nanocomposite as an electron transport layer10.1016/j.orgel.2015.11.015 ↗
14. Electrode work function reduction by polyethylenimine interlayers: choice of solvent and residual solvent removal for superior functionality10.1002/admi.202000291 ↗
15. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
16. Effect of PEI cathode interlayer on work function and interface resistance of ITO electrode in the inverted polymer solar cells10.1016/j.orgel.2014.11.023 ↗
17. Enhanced photo-stability of inverted organic solar cells via using polyethylenimine in the electron extraction layers10.1016/j.orgel.2019.05.048 ↗
18. Reducing ultraviolet-induced open-circuit voltage loss in inverted organic solar cells by maintaining charge selectivity of the electron collection contact using polyethylenimine10.1016/j.solener.2020.01.058 ↗
19. Influence of substituent groups on chemical reactivity kinetics of nonfullerene acceptors10.1021/acs.jpcc.9b09833 ↗
20. Semitransparent, non-fullerene and flexible all-plastic solar cells10.1016/j.polymer.2016.11.015 ↗
21. Facile preparation of a polymer-ZnO composite colloid as an electron transport layer and its effects on inverted polymer solar cells10.1016/j.jpcs.2020.109538 ↗
22. Roll-to-roll printed stable and thickness-independent ZnO:PEI composite electron transport layer for inverted organic solar cells10.1016/j.solener.2019.09.037 ↗
23. Zinc oxide: conjugated polymer nanocomposite as cathode buffer layer for solution processed inverted organic solar cells10.1016/j.solmat.2015.05.039 ↗
24. Significant enhancement of illumination stability of nonfullerene organic solar cells via an aqueous polyethylenimine modification10.1021/acs.jpclett.1c00276 ↗
25. Robust metal ion-chelated polymer interfacial layer for ultraflexible non-fullerene organic solar cells10.1038/s41467-020-18373-0 ↗
26. Increasing photostability of inverted nonfullerene organic solar cells by using fullerene derivative additives10.1021/acsami.1c00700 ↗
27. Blade-cast nonfullerene organic solar cells in air with excellent morphology, efficiency, and stability10.1002/adma.201800343 ↗
28. Highly efficient organic solar cells enabled by a porous ZnO/PEIE electron transport layer with enhanced light trapping10.1007/s40843-020-1508-7 ↗
29. Polyolefin elastomer as the anode interfacial layer for improved mechanical and air stabilities in nonfullerene solar cells10.1021/acsami.9b18095 ↗
30. 12.88% efficiency in doctor-blade coated organic solar cells through optimizing the surface morphology of a ZnO cathode buffer layer10.1039/C8TA08873J ↗
31. Optimized active layer morphology toward efficient and polymer batch insensitive organic solar cells10.1038/s41467-020-16621-x ↗
32. Achieving balanced crystallization kinetics of donor and acceptor by sequential-blade coated double bulk heterojunction organic solar cells10.1002/aenm.202000826 ↗
33. Semitransparent organic solar cells enabled by a sequentially deposited bilayer structure10.1021/acsami.0c00396 ↗
34. External load-dependent degradation of P3HT:PC61BM solar cells: behavior, mechanism, and method of suppression10.1039/C7TA02492D ↗
35. The study of solvent additive effects in efficient polymer photovoltaics via impedance spectroscopy10.1016/j.solmat.2014.05.049 ↗
36. An efficiency of 16.46% and a t80 lifetime of over 4000 h for the PM6:Y6 inverted organic solar cells enabled by surface acid treatment of the zinc oxide electron transporting layer10.1021/acsami.1c02613 ↗