journal article·2020-02

Polymer/TiO2 Nanoparticles interfacial effects on resistive switching under mechanical strain

Chi Zhang, Pei-Lun Yu, Yue Li, Jian-Chang Li

Publisher page

Abstract

Abstract Flexible resistive random access memory devices based on polymer thin films embedded with nanoparticles (NPs) offer the promise for the next generation nonvolatile memory applications. We systematically investigated the influence of polymer/NPs interface on switching behavior of TiO2 NPs embedded in matrixes of polymethyl methacrylate, poly (9,9-di-octylfluorene-alt-benzothiadiazole) (PFBT), poly (N-vinylcarbazole) or poly (3-hexylthiophene-2,5-diyl) under mechanical bending conditions fabricated by vacuum spray deposition. The bipolar switching was observed with ON/OFF ratio more than 103, in which samples with PFBT matrix exhibit the best bending endurance. Using quantum chemical calculations and electric field simulation, we showed the switching mechanism can be ascribed to the field-induced tunneling between adjacent NPs. Moreover, different from other matrixes, the segments of the PFBT molecules may serve as charge traps or blocks. The finite element studies and numerical simulation revealed that the NPs may serve as stress singularity, and interfacial microcracks may initiate and propagate along polymer/NPs interfaces after repeated bending. Such underlying damage can serve as blocks to hinder the charge transport and further deteriorates the switching performance. Our work may provide useful information on mechanical reliability of polymer/NPs interfaces for the development of flexible electronics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Electronic and Structural Properties of Oxides · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Band alignment at organic-inorganic semiconductor interfaces: alpha-NPD and CuPc on InP(110)10.1063/1.370165 ↗
2. Electrical bistability in a composite of polymer and barium titanate nanoparticles10.1098/rsta.2009.0167 ↗
3. Investigation of exciton photodissociation, charge transport and photovoltaic response of poly(N-vinyl carbazole): TiO2 nanocomposites for solar cell applications10.1088/0957-4484/19/37/375201 ↗
4. Foldable transparent substrates with embedded electrodes for flexible electronics10.1021/acsami.5b04982 ↗
5. Preparation and optoelectronic properties of a novel poly(N-vinylcarbazole) with covalently bonded titanium dioxide10.1002/app.28110 ↗
6. Transparent bipolar resistive switching memory on a flexible substrate with indium-zinc-oxide electrodes10.3938/jkps.69.1613 ↗
7. Unipolar nonvolatile memory devices with composites of poly(9-vinylcarbazole) and titanium dioxide nanoparticles10.1016/j.orgel.2009.02.001 ↗
8. Nonvolatile transistor memory devices based on high-k electrets of polyimide/TiO2 hybrids10.1039/C4PY00825A ↗
9. Conductance switching in TiO2 nanorods is a redox-driven process: evidence from photovoltaic parameters10.1021/jp908187a ↗
10. Organic nano-floating-gate memory: effects of metal nanoparticles and blocking dielectrics on memory characteristics10.1002/adfm.201203417 ↗
11. Facile synthesis of Co9Se8 quantum dots as charge traps for flexible organic resistive switching memory device10.1021/acsami.6b09616 ↗
12. Electrical stabilities and carrier transport mechanisms of flexible organic bistable devices based on CdSe-InP core-shell nanoparticle/polystyrene nanocomposites10.1063/1.4748873 ↗
13. Flexible polymer memory devices derived from triphenylamine-pyrene containing donor-acceptor polyimides10.1039/c2jm33852a ↗
14. Effect of bottom electrode materials on resistive switching of flexible poly (N-vinylcarbazole) film embedded with TiO2 nanoparticles10.1016/j.tsf.2018.08.042 ↗
15. Anatase TiO2 nanoparticles with exposed {001} facets for efficient dye-sensitized solar cells10.1038/srep12143 ↗
16. Improvement of reliability of polymer nanocomposite based transparent memory device by oxygen vacancy rich ZnO nanorods10.1016/j.mee.2016.04.027 ↗
17. Fabrication and characterization of TiO(2)-epoxy nanocomposite10.1016/j.msea.2007.11.052 ↗
18. Tuning the electrical switching of polymer/fullerene nanocomposite thin film devices by control of morphology10.1063/1.3033221 ↗
19. Electrical evaluation of crack generation in SiNx and SiOxNy thin-film encapsulation layers for OLED displays10.1016/j.apsusc.2016.02.142 ↗
20. Chiral poly(fluorene-alt-benzothiadiazole) (PFBT) and nanocomposites with gold nanoparticles: plasmonically and structurally enhanced chirality10.1021/ja107064a ↗
21. Polymer-ultrathin graphite sheet-polymer composite structured flexible nonvolatile bistable organic memory devices10.1088/0957-4484/22/29/295203 ↗
22. Switching behavior of plasma polymer films containing silver nanoparticles10.1063/1.1622990 ↗
23. Interfacial effects on resistive switching of flexible polymer thin films embedded with TiO2 nanoparticles10.1021/acs.jpcc.7b00690 ↗
24. Comparative investigation of fracture behaviour of aluminium-doped ZnO films on a flexible substrate10.1088/0022-3727/42/17/175404 ↗
25. Thickness-dependent fracture behaviour of flexible ZnO : Al thin films10.1088/0022-3727/44/2/025401 ↗
26. Enhanced fracture resistance of flexible ZnO:Al thin films in situ sputtered on bent polymer substrates10.1021/acsami.5b04727 ↗
27. Mechanics of rollable and foldable film-on-foil electronics10.1063/1.123478 ↗
28. Critical tensile and compressive strains for cracking of Al2O3 films grown by atomic layer deposition10.1063/1.3567912 ↗
29. Electrical switching of molecular thin films filled in metal oxide cracks10.1007/s00339-012-7284-9 ↗
30. Electrical bistability in hybrid ZnO nanorod/polymethylmethacrylate heterostructures10.1063/1.3511756 ↗
31. Organic photovoltaic cells fabricated on a SnOx/Ag/SnOx multilayer transparent conducting electrode10.1016/j.tsf.2012.05.029 ↗
32. A dynamic random access memory based on a conjugated copolymer containing electron-donor and -acceptor moieties10.1002/anie.200504365 ↗
33. Investigation into the Gaussian density of states widths of organic semiconductors10.1088/0022-3727/49/32/325106 ↗
34. Nonvolatile polymer memory device based on bistable electrical switching in a thin film of poly(N-vinylcarbazole) with covalently bonded C-6010.1021/la061504z ↗
35. Exploring the structure-activity relations of N-carbethoxyphthalimide by combining FTIR, FT-Raman and NMR spectroscopy with DFT electronic structure method10.1016/j.saa.2013.10.025 ↗
36. Modulating the bandgaps of graphdiyne nanoribbons by transverse electric fields
37. Effect of adding a polymer and varying device size on the resistive switching characteristics of perovskite nanocubes heterojunction10.1016/j.cap.2017.10.001 ↗
38. Fabrication of resistive switching memory based on solution processed PMMA-HfOxblended thin films10.1088/1361-6641/aa5133 ↗
39. Inorganic-organic hybrid polymer with multiple redox for high-density data storage10.1039/C4SC00823E ↗
40. Carrier transport and memory mechanisms of multilevel resistive memory devices with an intermediate state based on double-stacked organic/inorganic nanocomposites10.1016/j.orgel.2015.10.002 ↗
41. Nonvolatile flexible organic bistable devices fabricated utilizing CdSe/ZnS nanoparticles embedded in a conducting poly N-vinylcarbazole polymer layer10.1088/0957-4484/19/05/055204 ↗
42. Study of conductivity switching mechanism of CdSe/PVP nanocomposite for memory device application10.1016/j.mee.2014.11.010 ↗