Tailoring Mg:Ag functionalities for organic light-emitting diodes
Source abstract
Abstract
Abstract Magnesium (Mg) and silver (Ag) alloys are staple electrodes for organic light-emitting diodes (OLEDs). In this study, the Mg:Ag binary phase diagram is used to establish an electrode materials selection guide for both bottom- and top-emitting OLEDs. To achieve low turn-on voltage and high efficiency in bottom-emitting OLEDs, it is found that Mg:Ag cathodes must be selected from AgMg3 Mg phase region which provides the best figure of merits in low work function and high optical reflectance. For top-emitting OLEDs, however, Mg:Ag cathodes in the AgMg3 Mg region show large imaginary refractive index, and thus a stacked Mg:Ag/Ag is found essential to achieve optimal device performance. Furthermore, insertion of a thin LiF layer is found to create an effective charge injection cathode. In order to theoretically compute the devices’ optical characteristics, a database of complex optical constants of various materials including the metals is obtained by using a spectroscopic ellipsometer. This new database is found essential for accurate device optical design and engineering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Molecular Junctions and Nanostructures · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Tunable excitonic processes at organic heterojunctions10.1002/adma.201504287 ↗
2. Plasmonic nanocavity organic light-emitting diode with significantly enhanced light extraction, contrast, viewing angle, brightness, and low-glare10.1002/adfm.201400964 ↗
3. Low absorption semi-transparent cathode for micro-cavity top-emitting organic light emitting diodes10.1016/j.orgel.2017.10.020 ↗
4. Simulation of light emission from thin-film microcavities10.1364/JOSAA.15.000962 ↗
5. Work function and temperature dependence of electron tunneling through an N-type perylene diimide molecular junction with isocyanide surface linkers10.1039/C7NR06461F ↗
6. Photoemission spectroscopy investigation of magnesium–Alq3 interfaces10.1063/1.368035 ↗
7. Degradation processes at the cathode/organic interface in organic light emitting devices with Mg:Ag cathodes10.1063/1.121442 ↗
8. Role of electrode contamination in electron injection at Mg:Ag/Alq3 interfaces10.1002/(SICI)1521-4095(199912)11:18<1523::AID-ADMA1523>3.0.CO;2-K ↗
9. Transparent organic light-emitting devices with LiF/Mg:Ag cathode10.1364/OPEX.13.000937 ↗
10. Fabrication of electron injecting Mg:Ag alloy electrodes for organic light‐emitting diodes with radio frequency magnetron sputter deposition10.1063/1.117047 ↗
11. Transparent organic light emitting devices10.1063/1.116196 ↗
12. Enhanced moisture barrier performance for ALD-encapsulated OLEDs by introducing an organic protective layer10.1039/C7TC00903H ↗
13. Optical design of organic light emitting diodes
14. A generalized fabry–pérot formulation for optical modeling of organic light-emitting diodes considering the dipole orientation and light polarization
15. Spontaneous emission from planar microstructures10.1080/09500349414550361 ↗
16. Top-emitting organic light-emitting diodes: influence of cavity design10.1063/1.3530447 ↗
17. Efficiency and rate of spontaneous emission in organic electroluminescent devices10.1103/PhysRevB.85.115205 ↗
18. Ag-Mg (Silver-Magnesium)
19. Efficient micro-cavity top emission OLED with optimized Mg:Ag ratio cathode10.1364/OE.25.029906 ↗
20. Enhanced device performances of a new inverted top-emitting OLEDs with relatively thick Ag electrode10.1364/OE.26.004979 ↗
21. Multi-spectral imaging with infrared sensitive organic light emitting diode10.1038/srep05946 ↗
22. Low-power flexible organic light-emitting diode display device10.1002/adma.201101066 ↗
23. Multispectral surface plasmon resonance approach for ultra-thin silver layer characterization: application to top-emitting OLED cathode10.1063/1.5003869 ↗
24. Optimizing ultrathin Ag films for high performance oxide-metal-oxide flexible transparent electrodes through surface energy modulation and template-stripping procedures10.1038/srep44576 ↗
25. Improved out-coupling efficiency of organic light emitting diodes by manipulation of optical cavity length10.1016/j.orgel.2015.02.004 ↗
26. Pure and stable top-emitting white organic light-emitting diodes utilizing heterojunction blue emission layers and wide-angle interference10.1021/am5006354 ↗