Characterization of polymer bulk heterojunction photocell with unmodified C 70 prepared with halogen-free solvent for indoor light harvesting
Source abstract
Abstract
Abstract Although photocells are commonly characterized under AM1.5G 100 mW cm−2 (1 sun) illumination, their performance under low light illumination is also important, because photocells are frequently used for indoor applications. In this study, polymer photocells based on a bulk heterojunction composite consisting of a low energy gap polymer PTB7 and unmodified C70 prepared with a halogen-free solvent 1,2,4-trimethylbenzene have been characterized under the illumination of 1 sun or below. A typical photocell with the power conversion efficiency (PCE) of 4% at 1 sun shows the PCE of approximately 7% at 10−3 sun, which seems to fit for some indoor applications such as a permanent power source for a wireless sensor node. The sublinear dependence of short-circuit photocurrent on light intensity as well as the increase of fill-factor under low light illumination yields the increased efficiency under low light illumination. An analysis employing a one-diode equivalent circuit model suggests that the increased parallel resistance as well as the decreased saturation current of the diode under low light illumination accounts for the latter feature. It is also pointed out that the parallel resistance and/or the saturation current under dark strongly influence the PCE of a photocell under low light illumination. In addition, the dependence of the device performance on the light intensity is found to be useful for analyzing the effects of the thermal treatment and the PFN interlayer at cathode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
2. From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective10.1039/c3ee43460e ↗
3. Polymer solar cells10.1038/nphoton.2012.11 ↗
4. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
5. Fabrication and processing of polymer solar cells: A review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
6. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
7. Chlorine-free synthesis: an overview10.1351/PAC-CON-12-02-02 ↗
8. Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer–fullerene solar cells10.1016/j.solmat.2011.09.059 ↗
9. Halogen-free solvent processing for sustainable development of high efficiency organic solar cells10.1016/j.orgel.2012.08.026 ↗
10. Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells10.1039/c3ee41915k ↗
11. A transition solvent strategy to print polymer:fullerene films using halogen-free solvents for solar cell applications10.1016/j.orgel.2013.10.025 ↗
12. Potent solvents for C60 and their utility for the rapid acquisition of 13C NMR data for fullerenes10.1039/c39930001207 ↗
13. Poor man's green bulk heterojunction photocells: A chlorine-free solvent for poly(3-hexylthiophene)/C60 composites10.1016/j.solmat.2012.01.026 ↗
14. Yet another poor man's green bulk heterojunction photocells: Annealing effect and film composition dependence of photovoltaic devices using poly(3-hexylthiophene):C70 composites prepared with chlorine-free solvent10.1016/j.solmat.2012.09.014 ↗
15. Interplay between annealing temperature and optimum composition and fullerene aggregation effects in bulk heterojunction photocells based on poly(3-hexylthiophene) and unmodified C6010.1016/j.solmat.2013.08.033 ↗
16. Solution-processed small molecular photocells with neat fullerene10.1016/j.solmat.2014.07.032 ↗
17. Micropower energy harvesting10.1016/j.sse.2008.12.011 ↗
18. Indoor solar energy harvesting for sensor network router nodes10.1016/j.micpro.2007.02.006 ↗
19. Photovoltaic scavenging systems: modeling and optimization10.1016/j.mejo.2008.08.013 ↗
20. Is AM1.5 applicable in practice? Modelling eight photovoltaic materials with respect to light intensity and two spectra10.1016/S0960-1481(03)00068-5 ↗
21. SoC issues for RF smart dust10.1109/JPROC.2006.873620 ↗
22. Energy harvesting from human and machine motion for wireless electronic devices10.1109/JPROC.2008.927494 ↗
23. Effect of temperature and illumination on the electrical characteristics of polymer-fullerene bulk-heterojunction solar cells10.1002/adfm.200304399 ↗
24. Organic photovoltaics for low light applications10.1016/j.solmat.2011.07.011 ↗
25. Solution-processed fullerene-based organic schottky junction devices for large-open-circuit-voltage organic solar cells10.1002/adma.201203080 ↗
26. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
27. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
28. Bulk heterojunction photocells utilizing neat C70 and low energy-gap polymer prepared with halogen-free solvent10.1016/j.solmat.2013.06.004 ↗
29. Effect of conjugated polyelectrolyte interlayer at cathode in bulk heterojunction photocells based on neat C70 and low energy-gap polymer prepared with halogen-free solvent10.7567/APEX.7.051601 ↗
30. High-Entropy Mixtures of Pristine Fullerenes for Solution-Processed Transistors and Solar Cells10.1002/adma.201503530 ↗
31. Thermally robust bulk heterojunction photocells based on PTB7:C70 composites10.1016/j.solmat.2014.07.052 ↗
32. Fullerene nucleating agents: A route towards thermally stable photovoltaic blends10.1002/aenm.201301437 ↗
33. Parameter extraction from S-shaped current–voltage characteristics in organic photocell with opposed two-diode model: Effects of ideality factors and series resistance10.1002/pssa.201431877 ↗
34. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
35. An outline of some photoconductive processes
36. Origin of the light intensity dependence of the short-circuit current in polymer/fullerene solar cells10.1063/1.2130396 ↗
37. Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells10.1063/1.1889240 ↗
38. Origin of the reduced fill factor and photocurrent in MDMO-PPV: PCNEPV all-polymer solar cells10.1002/adfm.200601110 ↗
39. Determination of the trap-assisted recombination strength in polymer light emitting diodes10.1063/1.3559911 ↗
40. Simulation of light intensity dependent current characteristics of polymer solar cells10.1063/1.1646435 ↗