journal article·2012-11

High performance quasi-solid-state dye-sensitized solar cells based on acetamide-modified polymer electrolytes

Yanzheng Cui, Jing Zhang, Xueni Zhang, Jiangwei Feng, Yang Hong, Yuejin Zhu

Organic Electronics· Volume 13· Issue 11
Publisher page

Abstract

Abstract Quasi-solid-state dye-sensitized solar cells (DSSCs) are fabricated using acetamide-modified PEO/P(VDF-HFP) composite polymer electrolytes (CPEs) along with KI and I 2 . The DSSC assembled with acetamide-modified CPE shows higher open-circuit voltage and higher short-circuit photocurrent density than those of DSSC with unmodified CPE. With moderate acetamide content (0.20 g) modification, the DSSC exhibits a 14.3 mV improvement of photovoltage, a 2.83 mA cm −2 improvement of current density and a improved performance of 6.04% compared with 4.68% of the original DSSC. Variations in the V oc and J sc are explained in terms of shift of the flat band potential of TiO 2 and a complex formation between I 3 - and –NH 2 of acetamide in the electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Polyoxometalates: Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Combined experimental and DFT-TDDFT computational study of photoelectrochemical cell ruthenium sensitizers10.1021/ja052467l ↗
3. Recent developments in solid-state dye-sensitized solar cells10.1002/cssc.200800084 ↗
4. Formation of highly efficient dye-sensitized solar cells by hierarchical pore generation with nanoporous TiO2 spheres10.1002/adma.200900294 ↗
5. Porphyrin-sensitized solar cells with cobalt(II/III)-based redox electrolyte exceed 12% efficiency10.1126/science.1209688 ↗
6. Ionic liquid electrolytes based on 1-vinyl-3-alkylimidazolium iodides for dye-sensitized solar cells10.1016/j.solmat.2008.01.017 ↗
7. Efficiency enhancements in solid-state hybrid solar cells via reduced charge recombination and increased light capture10.1021/nl071656u ↗
8. Influence of doped anions on poly(3,4-ethylenedioxythiophene) as hole conductors for iodine-free solid-state dye-sensitized solar cells10.1021/ja075704o ↗
9. Preparation of PAA-g-CTAB/PANI polymer based gel-electrolyte and the application in quasi-solid-state dye-sensitized solar cells10.1016/j.electacta.2011.08.074 ↗
10. High performance quasi-solid-state dye-sensitized solar cells based on poly(lactic acid-co-glycolic acid)10.1016/j.jpowsour.2011.08.053 ↗
11. Influences of poly(ether urethane) introduction on poly(ethylene oxide) based polymer electrolyte for solvent-free dye-sensitized solar cells10.1016/j.electacta.2009.06.064 ↗
12. Iodide-conducting polymer electrolytes based on poly-ethylene glycol and MgI2: synthesis and structural characterization10.1016/j.electacta.2011.07.133 ↗
13. Oligomer approaches for solid-state dye-sensitized solar cells employing polymer electrolytes10.1021/jp067621k ↗
14. Conversion of light to electricity by cis-X2bis(2,2′-bipyridyl-4,4′-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X=Cl−, Br−, I−, CN−, and SCN−) on nanocrystalline TiO2 electrodes10.1021/ja00067a063 ↗
15. Influence of alkylaminopyridine additives in electrolytes on dye-sensitized solar cell performance10.1016/j.solmat.2003.09.001 ↗
16. Influence of aminotriazole additives in electrolytic solution on dye-sensitized solar cell performance10.1016/j.jphotochem.2003.11.013 ↗
17. Plastic PVDF-HFP electrolyte laminates prepared by a phase-inversion process10.1016/S0167-2738(00)00371-4 ↗
18. Dye-sensitized nanocrystalline solar cells employing a polymer electrolyte10.1002/1521-4095(200106)13:11<826::AID-ADMA826>3.0.CO;2-L ↗
19. Controlling the thermal polymerization process of hybrid organic-inorganic films synthesized from 3-methacryloxypropyltrimethoxysilane and 3-aminopropyltriethoxysilane10.1021/cm0343305 ↗
20. Hydrogen bonding and the inductive effect in crystalline and solution phases of hexylamine: LiCF3so3 and dipropylamine: LiCF3SO3: application to branched poly(ethylenimine)10.1021/jp052965g ↗
21. Normal vibrations of the polymer molecules of helical conformation. IV. Polyethylene oxide and polyethylene-d 4 oxide10.1063/1.1726373 ↗
22. Coordination and conformation in PEO, PEGM and PEG systems containing lithium or lanthanum triflate10.1016/0032-3861(95)96855-3 ↗
23. Vibrational spectroscopic studies of conformation of poly(oxyethylene). II. Conformation-spectrum correlations10.1002/polb.1986.090240702 ↗
24. Analysis of the crystallization behavior of poly(ethylene oxide)/poly(methyl methacrylate) blends by spectroscopic and calorimetric techniques10.1002/pol.1984.180220715 ↗
25. Roles of terminal groups of oligomer electrolytes in determining photovoltaic performances of dye-sensitized solar cells10.1039/b418061e ↗
26. Spectroscopic studies of the reaction of iodine with 2,3-diaminopyridine10.1016/j.saa.2003.11.012 ↗
27. Supramolecular electrolytes for use in highly efficient dye-sensitized solar cells10.1002/adma.200306664 ↗
28. Iodide electron transfer kinetics in dye-sensitized nanocrystalline TiO2 films10.1021/jp025824c ↗
29. Roles of terminal groups of oligomer electrolytes in determining photovoltaic performances of dye-sensitized solar cells10.1039/b418061e ↗
30. Nature of photovoltaic action in dye-sensitized solar cells10.1021/jp993187t ↗
31. Modified phthalocyanines for efficient near-IR sensitization of nanostructured TiO2 electrode10.1021/ja0178012 ↗
32. Resonance Raman scattering of a dye-sensitized solar cell: mechanism of thiocyanato ligand exchange10.1021/jp011062u ↗
33. Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells10.1021/jp052768h ↗
34. Modeling and interpretation of electrical impedance spectra of dye solar cells operated under open-circuit conditions10.1016/S0013-4686(02)00444-9 ↗