Layer by layer characterisation of the degradation process in PCDTBT:PC71BM based normal architecture polymer solar cells
Source abstract
Abstract
Abstract This work demonstrates the stability and degradation of OSCs based on poly[N-9′-heptadecanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′ benzothiadiazole)] (PCDTBT): (6,6)-Phenyl C 71 butyric acid methyl ester (PC 71 BM) photoactive blend layers as a function of ageing time in air. Analysis of the stability and degradation process for the OSCs was conducted under ambient air by using current-voltage (I-V) measurements and x-ray photoelectron spectroscopy (XPS). The interface between photoactive layer and HTL (PEDOT:PSS) was also investigated. Device stability was investigated by calculating decay in power conversion efficiency (PCE) as a function of ageing time in the air. The PCE of devices decrease from 5.17 to 3.61% in one week of fabrication, which is attributed to indium and oxygen migration into the PEDOT:PSS and PCDTBT:PC 71 BM layer. Further, after aging for 1000 h, XPS spectra confirm the significant diffusion of oxygen into the HTL and photoactive layer which increased from 3.0 and 23.3% to 20.4 and 35.7% in photoactive layer and HTL, respectively. Similarly, the indium content reached to 17.9% on PEDOT:PSS surface and 0.4% on PCDTBT:PC 71 BM surface in 1000 h. Core-level spectra of active layer indicate the oxidation of carbon atoms in the fullerene cage, oxidation of nitrogen present in the polymer matrix and formation of In 2 O 3 due to indium diffusion. We also observed a steady fall in the optical absorption of the active layer during ageing in ambient air and it reduced to 76.5% of initial value in 1000 h. On the basis of these experimental results, we discussed key parameters that account for the degradation process and stability of OSCs in order to improve the device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Influence of thermal annealing on PCDTBT: PCBM composition profiles10.1002/aenm.201300981 ↗
2. Marked improvement in the stability of small molecule organic photovoltaics by interfacial modification using self-assembled monolayers to prevent indium diffusion into the active layer10.1039/c3ta01229h ↗
3. Efficient flexible organic solar cells with room temperature sputtered and highly conductive NiO as hole-transporting layer10.1088/0022-3727/43/44/445101 ↗
4. Polymer solar cells10.1038/nphoton.2012.11 ↗
5. Plasmonically sensitized metal-oxide electron extraction layers for organic solar cells10.1038/srep07765 ↗
6. Degradation effects related to the hole transport layer in organic solar cells10.1002/adfm.201100429 ↗
7. Interface engineering for high performance bulk-heterojunction polymeric solar cells
8. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
9. Oxygen-and water-based degradation in [6, 6]-Phenyl-C61-Butyric acid methyl ester (PCBM) films10.1002/aenm.201301272 ↗
10. Inverted bulk-heterojunction solar cell with cross-linked hole-blocking layer10.1016/j.orgel.2014.02.009 ↗
11. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
12. Interfacial layer engineering for performance enhancement in polymer solar cells10.3390/polym7020333 ↗
13. Stability of polymer solar cells10.1002/adma.201104187 ↗
14. Out-door testing and long-term stability of plastic solar cells10.1051/epjap:2006159 ↗
15. Photoinduced degradation of polymer and polymer–fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗
16. Oxygen doping of P3HT: PCBM blends: influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
17. Influence of oxygen on semi-transparent organic solar cells with gas permeable electrodes10.1016/j.orgel.2009.08.001 ↗
18. Chemical changes in PCPDTBT: PCBM solar cells using XPS and TOF-SIMS and use of inverted device structure for improving lifetime performance10.1016/j.solmat.2015.05.016 ↗
19. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
20. Photo-oxidation and ozonization of poly (3-hexylthiophene) thin films as studied by UV/VIS and photoelectron spectroscopy10.1016/j.polymdegradstab.2010.02.004 ↗
21. Studies of degradation behaviors of poly (3-hexylthiophene) layers by X-ray photoelectron spectroscopy10.1002/sia.5557 ↗
22. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
23. Stability comparison: a PCDTBT/PC 71 BM bulk-heterojunction versus a P3HT/PC 71 BM bulk-heterojunction10.1016/j.solmat.2012.02.005 ↗
24. Exciton formation, relaxation, and decay in PCDTBT10.1021/ja105290e ↗
25. Ultrafast exciton dissociation followed by nongeminate charge recombination in PCDTBT: PCBM photovoltaic blends10.1021/ja201837e ↗
26. Enhanced performance and stability of polymer BHJ photovoltaic devices from dry transfer of PEDOT: PSS10.1002/cssc.201400022 ↗
27. Probing the thermal deoxygenation of graphene oxide using high-resolution in situ X-ray-based spectroscopies10.1021/jp203741y ↗
28. Evolution of electrical, chemical, and structural properties of transparent and conducting chemically derived graphene thin films10.1002/adfm.200900166 ↗
29. Bhushan · 2012
30. Synthesis of high quality reduced graphene oxide nanosheets free of paramagnetic metallic impurities10.1039/C2TA01036D ↗
31. Metal-free doped carbon materials as electrocatalysts for the oxygen reduction reaction10.1039/C3TA14043A ↗
32. Evidence of graphitic AB stacking order of graphite oxides10.1021/ja076473o ↗
33. High performance organic photovoltaics with zinc oxide and graphene oxide buffer layers10.1039/C3NR04709A ↗
34. Mittal · 2004
35. Combined XPS and TPD study of oxygen-functionalized carbon nanofibers grown on sintered metal fibers10.1016/j.carbon.2010.01.029 ↗
36. Electropolymerized molecularly imprinted polypyrrole film for sensing of clofibric acid10.3390/s150304870 ↗
37. Nitrogen-enriched carbons from alkali salts with high coulombic efficiency for energy storage applications10.1002/aenm.201200925 ↗
38. Sabu · 2012
39. Rapid, facile synthesis of nitrogen-rich carbon nitride powders10.1039/b109700h ↗
40. Structural characterisation of CN x thin films deposited by pulsed laser ablation10.1016/S0925-9635(02)00357-6 ↗
41. X-ray photoelectron spectroscopy reference data for identification of the C 3 N 4 phase in carbon–nitrogen films10.1016/S0925-9635(00)00345-9 ↗
42. One-pot synthesis of nitrogen–sulfur-co-doped carbons with tunable composition using a simple isothiocyanate ionic liquid10.1039/c3ta13435k ↗
43. Feng · 2015
44. Radovic · 2004
45. Gao · 2015
46. Role of humidity on indium and tin migration in organic photovoltaic devices10.1039/c0cp02203a ↗
47. Novel β-In 2.77 S 4 nanosheet-assembled hierarchical microspheres: synthesis and high performance for photocatalytic reduction of Cr (vi)10.1039/C5RA26850H ↗
48. The crucial role of confined residual additives on the photostability of P3HT: PCBM active layers10.1021/acs.jpcc.5b01733 ↗
49. Photochemical stability of conjugated polymers, electron acceptors and blends for polymer solar cells resolved in terms of film thickness and absorbance10.1039/c2jm16340c ↗
50. Investigation of photodegradation in polymer solar cells blended with different fullerenes derivatives10.1016/j.solmat.2014.01.001 ↗
51. Characterization of the degradation process of Si-PCPDTBT: PC 70 BM (1: 2) blend layers deposited on ITO/glass substrate10.1016/j.solmat.2014.09.014 ↗
52. Growth and morphology of sputtered aluminum thin films on P3HT surfaces10.1021/am101195m ↗
53. Grain size dependence of degradation of aluminium/calcium cathodes in organic solar cells following exposure to humid air10.1016/j.solmat.2015.03.015 ↗
54. Improving the efficiency of organic photovoltaics by tuning the work function of graphene oxide hole transporting layers10.1039/C4NR01539H ↗
55. Charge trapping centers in N-rich silicon nitride thin films10.1063/1.108222 ↗
56. Effect of ionization potential change in poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonic acid) on the performance of polymer light emitting diodes due to its reaction with indium tin oxide10.1063/1.2759474 ↗
57. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
58. Luminescence imaging of polymer solar cells: visualization of progressing degradation10.1063/1.3553864 ↗