journal article·2016-10

Buffer layers in inverted organic solar cells and their impact on the interface and device characteristics: An experimental and modeling analysis

Suman Banerjee, Shailendra Kumar Gupta, Arjun Singh, Ashish Garg

Publisher page

Abstract

Abstract Buffer layers play crucial role in increasing the power conversion efficiencies (η) in organic solar cells (OSCs) and hence it is important to understand the underlying microscopic mechanisms behind the improvements aiding the existing qualitative understanding. In this manuscript, we have investigated the role of zinc oxide (ZnO) and molybdenum oxide (MoO3) buffer layers on the current density - voltage (J-V) characteristics of inverted organic solar cell (IOSC) devices combining experimental results with drift-diffusion based transport modeling, on the active layer (ActL) blend of P3HT:PCBM (Poly 3-hexylthiophene (P3HT): (6, 6) phenyl C61 butyric acid methyl ester (PC61BM)), a workhorse system with well-established device data. The results show that while ZnO alone improves the open circuit voltage (VOC) significantly, use of both the ZnO and MoO3 layers help in improving the short-circuit current density (JSC), aided by contributions to exciton dissociation by both layers at the electrode ActL interface. Absence of ZnO, in particular, causes S-shaped J-V curve which is attributed to reduced surface recombination velocity of majority carriers due to hindered charge extraction and non-selectivity of carrier flow towards cathode. On the other hand, presence of MoO3film between ActL and the anode assists in making an energetically favourable contact with ActL and improves the extraction of photo generated charge carriers. Further in conjunction with dark J-V characteristics, impedance spectroscopy (IS) carried out under dark and illuminated conditions establishes the role of buffer layers in modifying the barrier heights at the contacts and the interfacial structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
2. Influence of oxygen on semi-transparent organic solar cells with gas permeable electrodes10.1016/j.orgel.2009.08.001 ↗
3. Degradation effects related to the hole transport layer in organic solar cells10.1002/adfm.201100429 ↗
4. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
5. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
6. Longterm stability of efficient inverted P3HT: PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
7. Improved reliability of small molecule organic solar cells by double anode buffer layers10.1155/2014/741761 ↗
8. Similar device architectures for inverted organic solar cell and laminated solid-state dye-sensitized solar cells10.5402/2012/180787 ↗
9. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
10. Solution-processed vanadium oxide as an anode interlayer for inverted polymer solar cells hybridized with ZnO nanorods10.1016/j.orgel.2009.05.017 ↗
11. Inverted type bulk-heterojunction organic solar cell using electrodeposited titanium oxide thin films as electron collector electrode10.1016/j.tsf.2008.12.039 ↗
12. Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer10.1063/1.2918983 ↗
13. Inverted organic solar cells comprising a solution-processed cesium fluoride interlayer10.1063/1.3548860 ↗
14. Efficient inverted solar cells using TiO2 nanotube arrays10.1088/0957-4484/19/25/255202 ↗
15. A semi-transparent plastic solar cell fabricated by a lamination process10.1002/adma.200701101 ↗
16. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
17. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
18. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
19. Sol–gel processed CuOx thin film as an anode interlayer for inverted polymer solar cells10.1016/j.orgel.2010.08.009 ↗
20. The stability of normal vs. inverted organic solar cells under highly damp conditions: comparison with the same interfacial layers10.1016/j.solmat.2014.04.036 ↗
21. Novel cathode buffer layer of Ag-doped bathocuproine for small molecule organic solar cell with inverted structure10.1016/j.orgel.2014.04.030 ↗
22. Performance improvement of inverted polymer solar cells thermally evaporating CuI as an anode buffer layer10.1016/j.synthmet.2014.09.035 ↗
23. Organic bulk heterojunction solar cells enhanced by spin interaction10.1016/j.synthmet.2012.12.035 ↗
24. Multiscale modeling and simulation of organic solar cells10.1016/j.cma.2012.06.018 ↗
25. Fill factor in organic solar cells10.1016/j.solmat.2008.06.001 ↗
26. Influence of doping on charge carrier collection in normal and inverted geometry polymer:fullerene solar cells10.1038/srep03335 ↗
27. Modeling electrical transport in blend heterojunction organic solar cells10.1063/1.1931038 ↗
28. Device model for the operation of polymer/fullerene bulk heterojunction solar cells10.1103/PhysRevB.72.085205 ↗
29. Modeling the current-voltage characteristics of bilayer polymer photovoltaic devices10.1103/PhysRevB.67.075205 ↗
30. Effect of contacts in organic bulk heterojunction solar cells10.1103/PhysRevApplied.1.024003 ↗
31. Organic solar cell efficiencies under the aspect of reduced surface recombination velocities10.1109/JSTQE.2010.2042142 ↗
32. S-shaped current-voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
33. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
34. Capacitance–voltage characteristics of P3HT: PCBM bulk heterojunction solar cells with ohmic contacts and the impact of single walled carbon nanotubes on them10.1016/j.orgel.2012.03.018 ↗
35. Simultaneous measurement of carrier density and mobility of organic semiconductors using capacitance techniques10.1016/j.orgel.2011.08.002 ↗
36. Study on the basic capacitance–voltage characteristics of organic molecular semiconductors10.1016/j.orgel.2015.03.002 ↗
37. Understanding the role of thickness and morphology of the constituent layers on the performance of inverted organic solar cells10.1016/j.solmat.2013.03.027 ↗
38. S.J. Fonash. Solar Cell Device Physics, second ed. Elsevier.
39. Large-signal analysis of a silicon Read diode oscillator10.1109/T-ED.1969.16566 ↗
40. D. Vasileska, D., Drift-Diffusion Model: Solution Details.http://nanohub.org/resources/1565/download/ddmodel_solution_details_word.pdf.
41. Research, W., Mathematica.
42. Modeling the short-circuit current density of polymer solar cells based on P3HT: PCBM blend10.1016/j.solmat.2006.10.019 ↗
43. Optical constants of the noble metals10.1103/PhysRevB.6.4370 ↗
44. Understanding the origin of the S-curve in conjugated polymer/fullerene photovoltaics from drift-diffusion simulations10.1063/1.4817396 ↗
45. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗
46. Understanding the role of thickness and morphology of the constituent layers on the performance of inverted organic solar cells10.1016/j.solmat.2013.03.027 ↗
47. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
48. Modeling electrical transport in blend heterojunction organic solar cells10.1063/1.1931038 ↗
49. Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells10.1039/C4EE03802A ↗
50. Mechanisms of device degradation in organic solar cells: influence of charge injection at the metal/organic contacts10.1016/j.orgel.2013.04.036 ↗
51. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
52. Organic Mip-diodes by p-doping of amorphous wide-gap semiconductors: CV and impedance spectroscopy10.1016/S0379-6779(01)00623-3 ↗
53. Built-in potential and validity of the Mott-Schottky analysis in organic bulk heterojunction solar cells10.1103/PhysRevB.84.153201 ↗
54. Sensitivity of the Mott–Schottky analysis in organic solar cells10.1021/jp300397f ↗
55. Determination of injection barriers in organic semiconductor devices from capacitance measurements10.1103/PhysRevLett.100.086802 ↗
56. Effects of energetic disorder on the low-frequency differential capacitance of organic light emitting diodes10.1063/1.3701575 ↗
57. Diffusive capacitance in space charge limited organic diodes: analysis of peak in capacitance-voltage characteristics10.1063/1.4812487 ↗
58. Band unpinning and photovoltaic model for P3HT: PCBM organic bulk heterojunctions under illumination10.1016/j.cplett.2008.09.035 ↗
59. Effects of contact-induced doping on the behaviors of organic photovoltaic devices10.1021/acs.nanolett.5b03473 ↗
60. Energy-level alignment at organic/metal and organic/organic interfaces10.1002/adma.200802893 ↗
61. Unintentional bulk doping of polymer-fullerene blends from a thin interfacial layer of MoO310.1002/aenm.201600670 ↗
62. The source of negative capacitance and anomalous peak in the forward bias capacitance-voltage in Cr/p-si Schottky barrier diodes (SBDs)10.1016/j.mssp.2015.05.044 ↗
63. Negative capacitance caused by electron injection through interfacial states in organic light-emitting diodes10.1016/j.cplett.2006.02.060 ↗
64. Capacitance-voltage characteristics of organic light-emitting diodes varying the cathode metal: implications for interfacial states10.1103/PhysRevB.75.085316 ↗