journal article·2016-08

Inverted polymer bulk heterojunction solar cells with ink-jet printed electron transport and active layers

Arjun Singh, Shailendra Kumar Gupta, Ashish Garg

Publisher page

Abstract

Abstract Ink-jet printing is a potentially attractive technique for printing of components for organic electronic devices primarily due to its ability to print patterned layers and reduced ink wastage. However, the mechanism of film formation is quite complex and needs an understanding of various printing parameters on the film growth. In this manuscript, we successfully demonstrate ink-jet printing of smooth zinc oxide (ZnO) thin films with controlled thickness as electron transport layers for inverted organic solar cell devices fabricated on indium tin oxide coated glass substrates. The parameters that strongly affect the formation of a continuous ZnO thin film with controlled thickness are ink concentration and viscosity, substrate surface treatment, drop spacing, substrate temperature during printing and the annealing temperature, affected by a combination of surface energetics, surface tension of the ink and the rate of solvent evaporation. The results suggest that one can achieve a transmittance of >85% for a 45 nm thin ZnO film possessing uniform structure and morphology, fabricated using a drop spacing of 40–50 μm at an ink viscosity of 4.70 cP with substrate held at room temperature. The P3HT:PC 61 BM inverted organic solar cell devices fabricated using printed ZnO films as electron transporting layers exhibit an efficiency of ∼3.4–3.5%, comparable to that shown by the devices fabricated on spin coated ZnO films. Finally, the device with printed P3HT:PC 61 BM active layer on printed ZnO layer showed a device efficiency of ca . 3.2% suggesting that nearly completely printed devices can deliver a comparable performance to the spin coated devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
3. Roll-to-Roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
4. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
5. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
6. Mechanisms of device degradation in organic solar cells: influence of charge injection at the metal/organic contacts10.1016/j.orgel.2013.04.036 ↗
7. Lifetimes of organic photovoltaics: combining chemical and physical characterisation techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
8. Solution-processed nanocrystalline TiO2 buffer layer used for improving the performance of organic photovoltaics10.1021/am101202k ↗
9. Enhanced efficiency and stability of polymer solar cells with TiO2 nanoparticles buffer layer10.1016/j.orgel.2014.01.024 ↗
10. Low-temperature, solution-processed MoOx for efficient and stable organic solar cells10.1021/am201825t ↗
11. Surface plasmon enhanced organic solar cells with a MoO3 buffer layer10.1021/am404441n ↗
12. Efficient polymer solar cells enabled by low temperature processed ternary metal oxide as electron transport interlayer with large stoichiometry window10.1021/acsami.5b02215 ↗
13. Enhanced lifetime of polymer solar cells by surface passivation of metal oxide buffer layers10.1021/acsami.5b04687 ↗
14. Air-stable efficient inverted polymer solar cells using solution-processed nanocrystalline ZnO interfacial layer10.1021/am303004r ↗
15. Improved performance of inverted polymer solar cells using pentacene10.1002/er.3431 ↗
16. Inkjet printing of organic electronics - comparison of deposition techniques and state-of-the-art developments10.1039/c2tc00255h ↗
17. Understanding the formation of PEDOT: PSS films by ink-jet printing for organic solar cell applications10.1039/C5RA11032G ↗
18. Polymer solar cells based on inkjet-printed PEDOT: PSS layer10.1016/j.orgel.2009.01.015 ↗
19. A new approach to the solvent system for inkjet-printed P3HT: PCBM solar cells and its use in devices with printed passive and active layers10.1016/j.solmat.2010.05.054 ↗
20. On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells10.1039/b823495g ↗
21. Printing highly efficient organic solar cells10.1021/nl801365k ↗
22. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
23. Inkjet-printed polymer–fullerene blends for organic electronic applications10.1016/j.mee.2012.02.005 ↗
24. Digital fabrication of organic solar cells by Inkjet printing using non-halogenated solvents10.1016/j.solmat.2014.12.014 ↗
25. Selective growth of zinc oxide nanorods on inkjet printed seed patterns10.1016/j.jcrysgro.2009.02.028 ↗
26. The preparation of ZnO based gas-sensing thin films by ink-jet printing method10.1016/j.tsf.2005.01.015 ↗
27. Oxide thin film transistors with ink-jet printed In-Ga-Zn oxide channel layer and ITO/IZO source/drain contacts
28. Inkjet printed high-mobility indium zinc tin oxide thin film transistors10.1039/b822893k ↗
29. Inkjet-printed zinc tin oxide thin-film transistor10.1021/la901436p ↗
30. High-speed, inkjet-printed carbon nanotube/zinc tin oxide hybrid complementary ring oscillators10.1021/nl5016014 ↗
31. Voltage-controlled ring oscillators based on inkjet printed carbon nanotubes and zinc tin oxide10.1021/acsami.5b02093 ↗
32. Enhanced photoresponse of inkjet-printed ZnO thin films capped with CdS nanoparticles10.1021/jz900008y ↗
33. Fabrication of polymer solar cells from organic nanoparticle dispersions by doctor blading or ink-jet printing10.1016/j.orgel.2015.10.011 ↗
34. High efficient plastic solar cells fabricated with a high-throughput gravure printing method10.1016/j.solmat.2010.05.027 ↗
35. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
36. Screen-printed polymer:fullerene bulk-heterojunction solar cells10.1143/JJAP.48.020208 ↗
37. Printed paper photovoltaic cells10.1002/aenm.201100394 ↗
38. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
39. High efficiency polymer solar cells via sequential inkjet-printing of PEDOT: PSS and P3HT: PCBM inks with additives10.1016/j.orgel.2010.06.007 ↗
40. Numerical calculation of the fluid dynamics of drop-on-demand jets10.1147/rd.283.0322 ↗
41. Influence of fluid physical properties on ink-jet printability10.1021/la900059m ↗
42. Ink jet deposition of ceramic suspensions: modeling and experiments of droplet formation10.1557/PROC-625-117 ↗
43. Estimation of built-in voltage from steady-state current–voltage characteristics of organic diodes10.1016/j.orgel.2013.04.030 ↗
44. How the charge-neutrality level of interface states controls energy level alignment in cathode contacts of organic bulk-heterojunction solar cells10.1021/nn300486a ↗
45. Comparative study: the effect of annealing conditions on the properties of P3HT: PCBM blends10.1007/s10853-012-6937-6 ↗
46. Understanding the role of thickness and morphology of the constituent layers on the performance of inverted organic solar cells10.1016/j.solmat.2013.03.027 ↗