journal article·2012-02

Morphological modification induced by external electric field during solution process of organic solar cells

Shou-Yuan Ma, Yu-Min Shen, Po-Ching Yang, Chao-Shuo Chen, Ching-Fuh Lin

Organic Electronics· Volume 13· Issue 2
Publisher page

Abstract

Abstract An electric field was externally applied on the poly(3-hexylthiophene)/[6,6]-phenyl C 61 butyric acid methyl ester (P3HT:PCBM) blend film during the fabrication of the bulk-heterojunction (BHJ) solar cells to induce morphological modification. It influences the vertical ratio of P3HT:PCBM molecules. Because the field is applied externally to the device, its direction can be altered. When the electric field of 5.0 × 10 5 V m −1 was applied with the specific direction, it formed a P3HT-rich and rougher surface, compared with that of pristine active layer, to improve the performance of the inverted polymer solar cells. Hence, the current density was improved from 9.15 mA cm −2 to 9.83 mA cm −2 , and power conversion efficiency increased from 3.16% to 3.51%. This finding provides guidance for morphology engineering in organic materials for higher power conversion efficiency of organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Fabrication of bulk heterojunction plastic solar cells by screen printing10.1063/1.1413501 ↗
2. Polymer electroluminescent devices processed by inkjet printing: I. Polymer light-emitting logo10.1063/1.121090 ↗
3. Characterization of large area flexible plastic solar cells based on conjugated polymer/fullerene composites10.1155/S1110662X99000185 ↗
4. Polymer photovoltaic cells - enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
5. Charge separation and photovoltaic conversion in polymer composites with internal donor–acceptor heterojunctions10.1063/1.359792 ↗
6. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
7. Exciton diffusion and dissociation in conjugated polymer/fullerene blends and heterostructures10.1103/PhysRevB.59.15346 ↗
8. Mechanisms controlling the efficiency of polymer solar cells10.1007/s00339-003-2496-7 ↗
9. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
10. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers10.1038/44359 ↗
11. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
12. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
13. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene10.1063/1.1861123 ↗
14. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
15. The importance of post-annealing process in the device performance of poly-(3-hexylthiophene): methanofullerene polymer solar cell10.1016/j.solmat.2006.11.010 ↗
16. Solvent mixtures for improving device efficiency of polymer photovoltaic devices10.1063/1.2898153 ↗
17. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
18. Effect of annealing on the optical, electrical, and photovoltaic properties of bulk hetero-junction device based on PPAT: TY blend10.1016/j.solmat.2006.09.006 ↗
19. Thermal treatment under reverse bias: effective tool for polymer/fullerene bulk heterojunction solar cells10.1016/j.synthmet.2007.12.015 ↗
20. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
21. Functionalized zinc oxide for improved organic photovoltaic systems
22. P-type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
23. Surface segregation and self-stratification in blends of spin-cast polyfluorene derivatives10.1088/0953-8984/17/8/010 ↗
24. Composition-dependent phase separation of P3HT:PCBM composites for high performance organic solar cells10.1016/j.orgel.2010.02.013 ↗
25. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
26. Improvement of inverted-type organic solar cells by mild oxygen plasma etching on polymer thin film10.1016/j.solmat.2010.05.028 ↗