Spray coated europium doped PEDOT:PSS anode buffer layer for organic solar cell: The role of electric field during deposition
Source abstract
Abstract
Abstract Poly (3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) doped with Eu3+ is spray deposited for creating an Anode buffer layer (ABL). The doping of Eu3+ in PEDOT:PSS causes the down-shifting of the UV light to visible spectrum enhancing the photon concentration in this region. The use of electric field during the spray deposition of undoped and Eu3+ doped PEDOT:PSS film improved the surface morphology and the electrical conductivity, which help to improve the solar cell performance. The organic solar cell (ITO/ABL/PTB7:PC71BM/Al) fabricated using the electric field assisted spray deposited Eu3+ doped PEDOT:PSS ABL is shown improvement in the power conversion efficiency in comparison to the device fabricated using undoped PEDOT:PSS without electric field. This enhancement in the efficiency of the device in terms of current density and Fill factor can be attributed to an increase in the photon concentration in visible region due to the downshifting and improvement in the surface morphology and conductivity due to applied electric field during deposition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Two layer organic photovoltaic cell10.1063/1.96937 ↗
2. High fabrication yield organic tandem photovoltaics combining vacuum- and solution-processed sub cells with 15% efficiency10.1038/s41560-018-0134-z ↗
3. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
4. For the bright future bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
5. Stability of polymer solar cells10.1002/adma.201104187 ↗
6. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
7. Examining the Effect of the dipole moment on charge separation in donor acceptor polymers for organic photovoltaic applications10.1021/ja208642b ↗
8. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
9. Annealed silver islands for enhanced optical absorption in organic solar cell10.1016/j.tsf.2015.11.076 ↗
10. Recent progress of high performance polymer OLED and OPV materials for organic printed electronics
11. Plasmonic nanograting design for inverted polymer solar cells10.1364/OE.20.00A729 ↗
12. High conductivity Poly(3,4‐ethylenedioxythiophene):Poly(styrene sulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗
13. Luminescent nanomaterials: application to in vivo bioimaging10.1039/b905927j ↗
14. Progress in relating rare-earth Ion 4f and 5d energy levels to host bands in optical materials for hole burning, quantum information, and phosphors10.1080/0950034021000011491 ↗
15. Rare earth ion doped up-conversion materials for photovoltaic applications10.1002/adma.201100511 ↗
16. Lanthanide ions as spectral converters for solar cells10.1039/b913877c ↗
17. The spectra of the doubly and triply ionized rare earths10.1364/AO.2.000675 ↗
18. Rare earth doped zinc oxide nanophosphor powder: a future material for solid state lighting and solar cell10.1021/acsphotonics.7b00777 ↗
19. Eu3+ doped down shifting TiO2 layer for efficient dye-sensitized solar cells10.1016/j.jcis.2016.08.060 ↗
20. Enhancing the photoelectrical performance of dye-sensitized solar cells using TiO2:Eu3+ nanorods10.1088/0957-4484/21/41/415201 ↗
21. Europium doped TiO2: an efficient photoanode material for dye sensitized solar cell10.1007/s10854-017-6387-7 ↗
22. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
23. Spin coating free fabrication for highly efficient perovskite solar cells10.1016/j.solmat.2017.04.029 ↗
24. Fabrication of perovskite films using an electrostatic assisted spray technique: the effect of the electric field on morphology, crystallinity and solar cell performance10.1039/C5NR08350H ↗
25. Charge Carrier mobility of the organic photovoltaic materials PTB7 and PC71BM and its influence on device performance10.1016/j.orgel.2015.03.013 ↗
26. Effect of electric field on the spray deposited poly (3,4-ethylenedioxythiophene): poly(styrenesulfonate) layer and its use in organic solar cell10.1063/1.4831662 ↗
27. On the structure of an electrostatic spray of monodisperse droplets10.1063/1.868182 ↗
28. Effect of electric field on spray deposited CdTe thin films10.1016/S0040-6090(03)00916-7 ↗
29. Photovoltaic devices with a PEDOT:PSS:WOx hole transport layer10.1039/c4ra01580k ↗
30. Effect of Eu doping on the photoluminescence properties of ZnO nanophosphors for red emission applications10.1016/j.apsusc.2014.04.192 ↗
31. Synthesis and photoluminescence properties of Eu3+-activated LiCa3ZnV3O12 white emitting Phosphors10.1039/C8RA03075H ↗
32. Polymer solar cells based on a PEDOT:PSS layer spin-coated under the action of an electric field
33. Performance enhancement of inverted type organic solar cells by using Eu doped TiO2 thin film10.1016/j.surfin.2017.08.003 ↗