High efficient ITO free inverted organic solar cells based on ultrathin Ca modified AZO cathode and their light soaking issue
Source abstract
Abstract
Abstract Aluminum doped zinc oxide (AZO) was used to be the cathode instead of indium-tin-oxide (ITO) in the poly (3-hexylthiophene-2,5-diyl):[6,6]-phenyl C 61 butyric acid methyl ester (P3HT:PCBM) based bulk heterojunction inverted organic solar cells (IOSCs). For the AZO only IOSC, the device shows a poor power conversion efficiency (PCE) of 1.34% and a light soaking issue related to the energy barrier at the AZO/P3HT:PCBM interface. When a 5 nm Ca modifying layer is inserted between AZO and P3HT:PCBM, the obtained AZO/Ca (5 nm) IOSC shows an increased PCE from 1.74% to 2.69% after 15 min illumination. It is thought that the increased photoconductivity of AZO/Ca (5 nm) film upon illumination and the enhanced electron transport across the AZO/Ca interface may be responsible for the light soaking issue. When an ultrathin Ca modifying layer of 1 nm is employed, a further improved PCE of 3.17% is obtained, and remarkably, no light soaking issue is observed in this case. However, this unexpected issue appears after the un-encapsulated AZO/Ca (1 nm) IOSC has been stored in air for several days, which may be due to the energy loss in the electron transport across the interface between partly oxidized Ca and AZO layers induced by the oxidization of Ca. Furthermore, the AZO/Ca (1 nm) IOSC has a comparable PCE to the referenced ITO/Ca (1 nm) IOSC and presents a better air-stability. It is thus concluded that the AZO cathode is a promising alternative of ITO to fabricate the high efficient and long-lifetime IOSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
3. Roles of donor and acceptor nanodomains in 6% efficient thermally annealed polymer photovoltaics10.1063/1.2730756 ↗
4. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
5. An inverted organic solar cell with an ultrathin Ca electron-transporting layer and MoO3 hole-transporting layer10.1063/1.3250176 ↗
6. Effects of cathode confinement on the performance of polymer/fullerene photovoltaic cells in the thermal treatment10.1109/TED.2010.2100820 ↗
7. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
8. Efficiency of bulk-heterojunction organic solar cells10.1016/j.progpolymsci.2013.05.001 ↗
9. Efficient and ultraviolet durable inverted organic solar cells based on an aluminum-doped zinc oxide transparent cathode10.1063/1.4816786 ↗
10. Development of inverted organic solar cells with TiO2 interface layer by using low-temperature atomic layer deposition10.1021/am302252p ↗
11. Surface interpenetration between conducting polymer and PET substrate for mechanically reinforced ITO-free flexible organic solar cells10.1016/j.solmat.2012.09.004 ↗
12. Mechanisms of device degradation in organic solar cells: influence of charge injection at the metal/organic contacts10.1016/j.orgel.2013.04.036 ↗
13. Indium tin oxide-free and metal-free semitransparent organic solar cells10.1063/1.3499299 ↗
14. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
15. Flexible organic solar cells using an oxide/metal/oxide trilayer as transparent electrode10.1016/j.orgel.2012.05.047 ↗
16. Package-free flexible organic solar cells with graphene top electrodes10.1002/adma.201205337 ↗
17. ITO-free inverted polymer solar cells using a GZO cathode modified by ZnO10.1016/j.solmat.2011.01.011 ↗
18. Efficient polymer solar cell employing an oxidized Ni capped Al:ZnO anode without the need of additional hole-transporting-layer10.1063/1.3673843 ↗
19. Improved electrical transport in Al-doped zinc oxide by thermal treatment10.1063/1.3269721 ↗
20. Doped ZnO thin films as anode materials for organic light-emitting diodes10.1016/S0040-6090(02)00836-2 ↗
21. High work function of Al-doped zinc-oxide thin films as transparent conductive anodes in organic light-emitting devices10.1016/j.apsusc.2006.03.032 ↗
22. Bulk heterojunction solar cells with NiO hole transporting layer based on AZO anode10.1016/j.solmat.2010.08.002 ↗
23. Aluminum doped zinc oxide for organic photovoltaics10.1063/1.3142423 ↗
24. Overcoming the “light-soaking” issue in inverted organic solar cells by the use of Al: ZnO electron extraction layers10.1002/aenm.201300402 ↗
25. Transient photovoltaic behavior of air-stable, inverted organic solar cells with solution-processed electron transport layer10.1063/1.3099947 ↗
26. Understanding S-shaped current–voltage characteristics in organic solar cells containing a TiOX interlayer with impedance spectroscopy and equivalent circuit analysis10.1021/jp305206d ↗
27. Light-soaking issue in polymer solar cells: photoinduced energy level alignment at the sol–gel processed metal oxide and indium tin oxide interface10.1063/1.4728173 ↗
28. Transient characteristics of inverted polymer solar cells using titaniumoxide interlayers10.1063/1.3455108 ↗
29. Improved performance and stability of inverted organic solar cells with sol–gel processed, amorphous mixed metal oxide electron extraction layers comprising alkaline earth metals10.1002/aenm.201300308 ↗
30. Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer10.1039/B921396A ↗
31. A simple and efficient solar cell parameter extraction method from a single current–voltage curve10.1063/1.3632971 ↗
32. Neamen · 2011
33. Room-temperature solution processed SnOx as an electron extraction layer for inverted organic solar cells with superior thermal stability10.1039/c2jm33445c ↗
34. Inverted small molecule organic solar cells with Ca modified ITO as cathode and MoO3 modified Ag as anode10.1016/j.solmat.2010.08.031 ↗
35. Structural, optical, and electrical properties of (Zn:Al)O films over a wide range of compositions10.1063/1.2357638 ↗
36. Oxide sandwiched metal thin-film electrodes for long-term stable organic solar cells10.1002/adfm.201201592 ↗
37. .
38. Improvement of organic solar cell performances using a zinc oxide anode coated by an ultrathin metallic layer10.1063/1.2888176 ↗
39. Optimization of an inverted organic solar cell10.1016/j.solmat.2010.02.010 ↗
40. Self-assembled monolayer as an interfacial modification material for highly efficient and air-stable inverted organic solar cells10.1063/1.4802086 ↗
41. All-spray-coated semitransparent inverted organic solar cells: from electron selective to anode layers10.1016/j.orgel.2012.08.012 ↗