journal article·2019-05Open access

Effect of photogenerated carrier distribution on performance enhancement of photomultiplication organic photodetectors

Wenyan Wang, Linlin Shi, Ye Zhang, Guohui Li, Yuying Hao, Furong Zhu, Kaiying Wang, Yanxia Cui

Abstract

Abstract The trap-assisted photomultiplication (PM) organic photodetectors (OPDs) are very attractive for achieving high sensitivity photodetection, with external quantum efficiency (EQE) in excess of 100%. A classic structure of PM-type OPDs has a poly-3-hexylthiophene (P3HT): Phenyl-C70-butyric acid methyl ester (PC70BM) blend active layer, made with the weight ratio of P3HT to PC70BM of 100:1. The presence of a low PC70BM content in the P3HT:PC70BM blend layer forms isolated PC70BM domains serving as the defect sites to trap the photogenerated electrons. The trapped electrons induce a strong interfacial band bending at the organic/metal contact (Al) interface assisting in an enhanced hole injection via tunneling effect. In this work, we report a comprehensive study to understand the effect of the distribution of the photogenerated charge carriers on performance of the PM OPDs, made with a P3HT:PC70BM active layer with different layer thicknesses, for optimizing the PM effect. The combination effect of both the exciton generation and carrier loss properties affects the distribution of the photogenerated charge carriers and hence the PM processes in the OPDs. The optical properties of the PM OPDs were simulated. It reveals that a stronger exciton generation occurs near the organic/Al interface in PM OPD with a thinner active layer. The photoluminescence and surface morphology measurements suggested that a 230 nm thick active layer with a smooth surface had the lowest nonradiative loss. An optimal EQE of 105569% and a photoresponsivity of 344 A/W were obtained for a PM OPD with a 205 nm thick active layer, which are about 330% higher than that of the OPD with a 325 nm thick active layer. Due to the tradeoff between EQE and dark current, the OPD with a thin active layer (205 nm) yields a maximum detectivity of 1.87 × 1013 Jones at the short wavelength range while the OPD with a thick active layer (325 nm) has the highest detectivity of 2.32 × 1013 Jones at the long wavelength range. Our work contributes to the development of high performance low-cost PM OPDs for detecting weak light signals.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Solution-processable inverted organic photodetectors using oxygen plasma treatment10.1016/j.orgel.2010.04.023 ↗
2. Polythiophene-fullerene based photodetectors: tuning of spectral response and application in photoluminescence based (bio)chemical sensors10.1002/adma.201000417 ↗
3. Low dark current small molecule organic photodetectors with selective response to green light10.1063/1.4816502 ↗
4. NIR to visible light upconversion devices comprising an NIR charge generation layer and a perovskite emitter
5. Recent progress on highly sensitive perovskite photodetectors
6. High sensitivity, fast response and low operating voltage organic photodetectors by incorporating a water/alcohol soluble conjugated polymer anode buffer layer10.1039/C6RA26750E ↗
7. A nanocomposite ultraviolet photodetector based on interfacial trap-controlled charge injection10.1038/nnano.2012.187 ↗
8. A trap-assisted ultrasensitive near-infrared organic photomultiple photodetector based on Y-type titanylphthalocyanine nanoparticles10.1039/C6TC00854B ↗
9. Trap-assisted photomultiplication polymer photodetectors obtaining an external quantum efficiency of 37,500%10.1021/acsami.5b00041 ↗
10. Revealing the working mechanism of polymer photodetectors with ultra-high external quantum efficiency10.1039/C5CP05557A ↗
11. Trap engineering of CdTe nanoparticle for high gain, fast response, and low noise P3HT:CdTe nanocomposite photodetectors10.1002/adma.201502292 ↗
12. Highly narrowband photomultiplication type organic photodetectors10.1021/acs.nanolett.6b05418 ↗
13. Research progress in organic photomultiplication photodetectors10.3390/nano8090713 ↗
14. Recent progress on photomultiplication type organic photodetectors10.1002/lpor.201800204 ↗
15. Nanostructured materials for photon detection10.1038/nnano.2010.78 ↗
16. High-responsivity graphene/silicon-heterostructure waveguide photodetectors10.1038/nphoton.2013.241 ↗
17. Photodetectors based on graphene, other two-dimensional materials and hybrid systems10.1038/nnano.2014.215 ↗
18. High performance small molecule photodetector with broad spectral response range from 200 to 900 nm10.1063/1.3610993 ↗
19. Direct determination of the exciton binding energy of conjugated polymers using a scanning tunneling microscope10.1103/PhysRevLett.81.1082 ↗
20. Space‐charge‐limited current and band structure in amorphous organic films10.1002/pssb.19690350123 ↗
21. Photocurrent multiplication phenomena at organic/metal and organic/organic interfaces10.1016/S0040-6090(98)00900-6 ↗
22. Photocurrent multiplication in organic single crystals10.1063/1.1501764 ↗
23. Large gain, low noise nanocomposite ultraviolet photodetectors with a linear dynamic range of 120 dB10.1002/adom.201300530 ↗
24. Efficient bulk photogeneration of charge carriers and photoconductivity gain in arylamino-PPV polymer sandwich cells10.1103/PhysRevB.59.1964 ↗
25. Bulk photoconductive gain in poly(phenylene vinylene) based diodes10.1063/1.2422909 ↗
26. Improved performance of photomultiplication polymer photodetectors by adjustment of P3HT molecular arrangement10.1021/acsami.5b07522 ↗
27. An ultraviolet-to-NIR broad spectral nanocomposite photodetector with gain10.1002/adom.201400023 ↗
28. Improved efficiency of organic photovoltaic cells by incorporation of AuAg-alloyed nanoprisms10.1109/JPHOTOV.2017.2688578 ↗
29. Efficiency enhancement in organic solar cells by incorporating silica-coated gold nanorods at the buffer/active interface10.1039/C5TC01220A ↗
30. Highly sensitive polymer photodetectors with a broad spectral response range from UV light to the near infrared region10.1039/C5TC01383F ↗
31. Highly sensitive polymer photodetectors with a wide spectral response range10.1088/1674-1056/26/1/018201 ↗
32. Organic ultraviolet photodetectors exhibiting photomultiplication, low dark current, and high stability10.1002/admt.201700025 ↗
33. Achieving EQE of 16,700% in P3HT:PC71BM based photodetectors by trap-assisted photomultiplication
34. Photomultiplication photodetectors with P3HT:fullerene-free material as the active layers exhibiting a broad response10.1039/C6NR00079G ↗
35. Comparison of nanohole-type and nanopillar-type patterned metallic electrodes incorporated in organic solar cells10.1186/s11671-017-2310-7 ↗
36. Comparison of nanohole-type and nanopillar-type patterned metallic electrodes incorporated in organic solar cells10.1186/s11671-017-2310-7 ↗
37. Incorporating silver-SiO2 core-shell nanocubes for simultaneous broadband absorption and charge collection enhancements in organic solar cells10.1016/j.synthmet.2016.08.004 ↗
38. High-efficiency, broad-band and wide-angle optical absorption in ultra-thin organic photovoltaic devices10.1364/OE.22.00A376 ↗
39. Relation between photoactive layer thickness, 3D morphology, and device performance in P3HT/PCBM bulk-heterojunction solar cells10.1021/ma900817t ↗