journal article·2012-01

Full color organic electroluminescent display with shared blue light-emitting layer for reducing one fine metal shadow mask

Shuming Chen, Hoi-Sing Kwok

Organic Electronics· Volume 13· Issue 1
Publisher page

Abstract

To make a full color organic electroluminescent display, conventionally it requires three fine metal shadow masks (FMM) to pattern the red, green and blue light-emitting layer. In this work, by arranging the blue light-emitting layer as a shared layer for all sub-pixels, we demonstrate that a full color display can be achieved by two FMM processes, thus reducing one FMM process compared to conventional method. The red, green and blue sub-pixels can be optimized independently despite the reduction of one FMM process. Also, the performance of the red and green sub-pixels is not degraded by the shared blue light-emitting layer. Due to elimination of one FMM, the process TACT time, mask cost and alignment error can all be reduced, thus cutting down the manufacturing cost of full color organic electroluminescent display.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Thin-Film Transistor Technologies · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Novel pixel design for high-resolution AMOLED displays with a shadow mask10.1889/1.2451539 ↗
2. Technological challenges for large-size AMOLED display10.1889/1.3069649 ↗
3. Large-size full color AMOLED TV: advancements and issues10.1889/1.2451418 ↗
4. A 3.6-in. 202-ppi full-color AMPLED display fabricated by ink-jet method10.1889/1.2433379 ↗
5. Towards large-area full-color active-matrix printed polymer OLED television10.1889/1.1867094 ↗
6. Novel laser transfer technology for manufacturing large-sized OLED displays10.1889/1.2785623 ↗
7. Non-contact OLED color patterning by radiation-induced sublimation transfer (RIST)10.1889/1.2036612 ↗
8. S. Kim, S. Lee, M. Kim, J. Song, E. Hwang, S. Tamura, S. Kang, H, Kim, C. Kim, J. Lee, J. Kim, S. Cho, J. Cho, M.C. Suh, H. Kim, A 3.0-in. 308-ppi WVGA AMOLED with a top-emission white OLED and color filter, J. Soc. Inf. Display 17 (2009) 145–149.10.1889/JSID17.2.145 ↗
9. J.E. Stagnitto, T.W. Palone, C.J. Raes, J.A. White, J. Yokajty, G. Rajeswaran, Method and apparatus for making a shadow mask array, US Patent 6729927, 2004.
10. T.R. Griffin, T.W. Palone, Aligning OLED substrate to a shadow mask, US Patent 20070184745, 2007.
11. R.A. Boudreau, R.J. Wilkie, Apparatus and method for registration of shadow masked thin-film patterns, US Patent 4915057, 1990.
12. Precise, scalable shadow mask patterning of vacuum-deposited organic light emitting devices10.1116/1.581969 ↗
13. T. Yamada, Electroluminescent display apparatus, US Patent 6366025, 2002.
14. Control of emission zone in a full color AMOLED with a blue common layer10.1889/1.2433234 ↗
15. High-performance solution-processed OLED enhanced by evaporated common layer10.1889/1.3621488 ↗
16. Design of multiwavelength resonant cavities for white organic light-emitting diodes10.1063/1.1527708 ↗
17. Color tunable metal-cavity organic light-emitting diodes with fullerene layer10.1063/1.1887830 ↗
18. White organic light-emitting diodes with evenly separated red, green and blue colors for efficiency/color rendition optimization10.1002/adfm.201100895 ↗
19. Top-emitting white organic light-emitting diodes with a color conversion cap layer10.1016/j.orgel.2011.01.005 ↗
20. Enhanced efficiency and reduced roll-off in blue and white phosphorescent organic light-emitting diodes with a mixed host structure10.1063/1.3136861 ↗
21. Low roll-off of efficiency at high current density in phosphorescent organic light emitting diodes10.1063/1.2745224 ↗
22. Enhancing color gamut of white OLED displays by using microcavity green pixels10.1016/j.orgel.2009.11.002 ↗