journal article·2018-10

Impedance spectroscopy and capacitance – voltage measurements analysis: Impact of charge carrier lifetimes and mapping vertical segregation in bulk heterojunction P3HT: PCBM solar cells

O. Oklobia, S. Komilian, T. Sadat-Shafai

Publisher page

Abstract

Impedance spectroscopy measurement is employed to study the impact of thermal annealing on charge carrier lifetimes in P3HT: PCBM bulk heterojunction solar cells. Upon thermal annealing at 150 °C, a correlation between charge carrier lifetime and device performance is identified. The best power conversion efficiency reported here corresponds to the devices annealed at 150 °C, yielding the longest charge carrier life time. In addition to lateral segregation, thermal annealing promotes accumulation of PCBM molecular aggregates towards the cathode inducing vertical segregation as is evident from the analysis of results obtained from capacitance – voltage measurements. Based on Mott-Schottky relation, the measured values of the flat band potential as a function of thermal annealing is correlated to the concentration of PCBM at cathode interface and a compositional gradient profile induced by thermal annealing is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Strategies for increasing the efficiency of heterojunction organic solar cells: material selection and device architecture10.1021/ar9000923 ↗
2. Polymer: fullerene bulk heterojunction solar cells10.1016/S1369-7021(11)70210-3 ↗
3. Fabrication and processing of polymer solar cells, A review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Polythiophene based bulk heterojunction solar cells: morphology and its implications10.1016/j.tsf.2005.12.031 ↗
5. Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk heterojunction polymer solar cells10.1016/j.solmat.2008.12.013 ↗
6. The impact of controlled solvent exposure on the morphology of, structure and function of bulk heterojunction solar cells10.1016/j.solmat.2012.07.014 ↗
7. Optimization and simplification of polymer-fullerene solar cells through polymer and active layer design10.1016/j.polymer.2013.07.053 ↗
8. Polymer solar cells10.1038/nphoton.2012.11 ↗
9. Effect of solvent on fabrication of active layers in organic solar cells based on poly(3-hexylthiophene)and fullerene derivatives10.1016/j.solmat.2008.11.003 ↗
10. Polymer - fullerene composite solar cells10.1002/anie.200702506 ↗
11. P3HT: PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
12. Understanding the influence of morphology on poly (3-hexylselenothiophene): PCBM solar cells10.1021/ma902477h ↗
13. A quantitative study of the formation of PCBM clusters upon thermal annealing of P3HT/PCBM bulk Heterojunction Solar Cell10.1016/j.solmat.2013.05.011 ↗
14. Morphology evolution via self-organisation and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
15. Charge transport and photocurrent generation in poly(3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
16. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
17. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
18. The active layer morphology organic solar cells probed with grazing incidence scattering techniques10.1002/adma.201304187 ↗
19. Fullerene crystallisation as a key driver of charge separation in polymer/fullerene bulk heterojunction solar cells10.1039/C1SC00674F ↗
20. Fullerene crystallisation as a key driver of charge separation in polymer/fullerene bulk heterojunction solar cells10.1016/j.tsf.2005.12.064 ↗
21. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)
22. Influence of nanomorphology on the photovoltaic action of polymer-fullerene composites10.1088/0957-4484/15/9/035 ↗
23. Characterization of inverted-type organic solar cells with a ZnO layer as the electron collection electrode by ac impedance spectroscopy10.1021/am900446x ↗
24. Correlation between the photovoltaic performance and impedance spectroscopy of dye-sensitized solar cells based on ionic liquids10.1021/jp066178a ↗
25. Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells10.1021/jp052768h ↗
26. Modelling of an equivalent circuit for dye-sensitized solar cells10.1063/1.1690495 ↗
27. Equivalent circuit for an organic field-effect transistor from impedance measurement under dc bias10.1063/1.2186989 ↗
28. Design of hole blocking layer with electron transport channels for high performance polymer light-emitting diodes10.1002/adma.200702150 ↗
29. Investigation of annealing effects on microstructure of hybrid nanocrystal-polymer solar cells by impedance spectroscopy10.1016/j.synthmet.2009.11.028 ↗
30. Impedance spectrometry of optimized standard and inverted P3HT-PCBM organic solar cells10.1016/j.solmat.2012.01.013 ↗
31. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
32. Correlation between charge carriers mobility and PCBM cluster formation and its impact on recombination process in a blend of PCBM/P3HT bulk Heterojunction solar cell10.1016/j.solmat.2013.11.035 ↗
33. In situ characterisation of lifetime and morphology in operating bulk heterojunction organic photovoltaic devices by impedance spectroscopy10.1002/aenm.201100357 ↗
34. Bondarenko
35. Electric field assisted dissociation of charge transfer states as a mechanism of photocarrier production10.1063/1.447243 ↗
36. Photocurrent generation in polymer-fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
37. Macdonald · 1987
38. Carrier lifetime extension via the incorporation of robust hole/electron blocking layers in bulk heterojunction polymer solar cells10.1021/am404381e ↗
39. Electrodeposited NiO anode interfacial layers: enhancement of the charge Carrier selectivity in organic solar cells10.1016/j.solmat.2013.07.020 ↗
40. Solution-processed small molecule: fullerene bulk heterojunction solar cells: impedance spectroscopy deduced bulk and interfacial limits to fill-factors10.1039/c3cp52363b ↗
41. Charge Carrier transport and contact selectivity limit the operation of PTB7-based organic solar cells of varying active layer thickness10.1039/c3ta12358h ↗
42. Vertical phase separation of conjugated polymer and fullerene bulk heterojunction films induced by high pressure carbon dioxide treatment at ambient temperature10.1039/c2cp41161j ↗
43. Kim · 2004 · vol 37 · 2861
44. Vertical concentration gradients in bulk heterojunction solar cells induced by differential solubility10.1016/j.tsf.2010.11.054 ↗
45. How the charge-neutrality level of interface states controls energy level alignment in cathode contacts of organic bulk-heterojunction solar10.1021/nn300486a ↗
46. Barrier Formation at metal-organic interfaces: dipole formation and the charge neutrality level10.1016/j.apsusc.2004.05.084 ↗
47. Interplay between fullerene surface coverage and contact selectivity of cathode interfaces in organic solar cells10.1021/nn4014593 ↗
48. Charge Carrier lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
49. Simultaneous measurement of Carrier density and mobility of organic semiconductors using capacitance techniques10.1016/j.orgel.2011.08.002 ↗