Preparation of light-transmissive conductive film by free arc dispersed carbon nanotubes and thermos compression bonding
Source abstract
Abstract
To investigate the effect of gas dispersing carbon nanotubes (CNTs) and hot pressing method on the transparency and the conductivity of thin films, the free arc was used to disperse the CNTs in a high dispersion rate, and the dispersed CNTs were rapidly pressed into the surface of the PET film by hot pressing to obtain electrical conductivity. The relationship between the light transmission and sheet resistance of the film was studied by changing the deposition time and the presence or absence of electrostatic adsorption. It was found that the CNTs modified film still retains good electrical conductivity (sheet resistance up to 6 × 104 Ω, light transmittance 69%) through the cleaning of surfactants and ultrasonic waves, which proves that hot pressing is a simple physical method to achieve effective combination of CNTs and films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Advanced Sensor and Energy Harvesting Materials · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Zhang LQ, Yang R, Chen K, Wang X, Tang YS, Yang F, Liu R, Ye ZZ, Li YF (2017) The fabrication of Cu nanowire/graphene/Al doped ZnO transparent conductive film on PET substrate with high flexibility and air stability. Mater Lett 207:6210.1016/j.matlet.2017.07.048 ↗
2. Edinger S, Bansal N, Bauch M, Wibowo RA, Újvári G, Hamid R, Trimmel G, Dimopoulos T (2017) Highly transparent and conductive indium-doped zinc oxide films deposited at low substrate temperature by spray pyrolysis from water-based solutions. J Mater Sci 52:859110.1007/s10853-017-1084-8 ↗
3. Liu WS, Cheng HM, Hu HC, Li YT, Huang SD, Yu HW, Pu NW, Liang SC (2015) Indium tin oxide with titanium doping for transparent conductive film application CIGS solar cells. Appl Surf Sci 354:3110.1016/j.apsusc.2015.02.130 ↗
4. Aoki Y, Fujita S, Haramizu S, Akagi K, Shirakawa H (1997) Current progress in synthesis of polyacetylene films. Synth. Met 84:30710.1016/S0379-6779(97)80761-8 ↗
5. An S, Kim YI, Jo HS, Kim MW, Swihart MT, Yarin AL, Yoon SS (2018) Oxidation-resistant metallized nanofibers as transparent conducting films and heaters. Acta Mater 143:17410.1016/j.actamat.2017.09.068 ↗
6. Oytun F, Alpturk O, Basarir F (2019) Coupling layer-by-layer assembly and multilayer transfer to fabricate flexible transparent film heater. Mater Res Bull 112:5310.1016/j.materresbull.2018.11.034 ↗
7. Walton MD, Kim YS, Jan CJ, McConnel EP, Everett WN, Grunlan JC (2007) Deposition and patterning of conductive carbon black thin films. Synth Met 157:63210.1016/j.synthmet.2007.07.002 ↗
8. Kang ZX, Zhang Y, Zhou MQ (2019) AgNPs@CNTs/Ag hybrid films on thiolated PET substrate for flexible electronics. J Chem Eng 368:22310.1016/j.cej.2019.01.005 ↗
9. Zhang Y, Kang ZX (2018) Highly conductive and anticorrosion Ag/CNTs/NDs hybrid films on molecular-grafted PET substrate for flexible electrodes. Appl Surf Sci 427:28210.1016/j.apsusc.2017.07.270 ↗
10. Oliveira RDS, Bizeto MA, Camilo FF (2018) Production of self-supported conductive films based on cellulose polyaniline and silver nanoparticles. Carbohydr Polym 199:8410.1016/j.carbpol.2018.06.049 ↗
11. Zhang Y, Kang ZX, Bessho T, Hirahara H, Sang J (2017) Synthesis of Ag/CNT composite films on photo-grafted polyimide substrate by two component spin-spray deposition. J Ind Eng Chem 56:35510.1016/j.jiec.2017.07.032 ↗
12. Kim BJ, Han SH, Park JS (2015) Properties of CNTs coated by PEDOT:PSS films via spin-coating and electrophoretic deposition methods for flexible transparent electrodes. Surf Coat Technol 217:2210.1016/j.surfcoat.2015.01.045 ↗
13. Liu ZM, Ma LX, Tang YZ, He Y, Jiang YN, Xu J, Chen H (2019) Molecular dynamics simulation of thermal excitation-induced dispersion of carbon nanotubes. Chem Phys Lett 722:10410.1016/j.cplett.2019.02.048 ↗
14. Pierard N, Fonseca A, Konya Z, Willems I, Tendeloo GV, Nagy JB (2001) Production of short carbon nanotubes with open tipes by ball milling. Chem Phys Lett 335:110.1016/S0009-2614(01)00004-5 ↗
15. Zapata-Massot C, Bolay NL (2008) Effect of ball milling in a tumbling ball mill on the properties of multi-wall carbon nanotubes. Chem Eng Process Process Intensif 47(8):135010.1016/j.cep.2007.05.001 ↗
16. Gao Y, Jing HW, Chen SJ, Dua MR, Chen WQ, Duan WH (2019) Influence of ultrasonication on the dispersion and enhancing effect of graphene oxide–carbon nanotube hybrid nanoreinforcement in cementitious composite. Compos Part B 164:4510.1016/j.compositesb.2018.11.066 ↗
17. Zhang Y, Kang ZX, Bessho T (2017) Two-component spin-coated Ag/CNT composite films based on a silver heterogeneous nucleation mechanism adhesion-enhanced by mechanical interlocking and chemical grafting. Nanotechnology 28:105
18. Zhang MN, Su L, Mao LQ (2006) Surfactant functionalization of carbon nanotubes (CNTs) for layer-by-layer assembling of CNT multi-layer films and fabrication of gold nanoparticle/CNT nanohybrid. Carbon 44:27610.1016/j.carbon.2005.07.021 ↗
19. Jiang YF, Song H, Xu R (2018) Research on the dispersion of carbon nanotubes by ultrasonic oscillation, surfactant and centrifugation respectively and fiscal policies for its industrial development. Ultrason Sonochem 48:3010.1016/j.ultsonch.2018.05.021 ↗
20. Li SL, He Y, Jing CW, Gong XB, Cui LL, Cheng ZY, Zhang CQ, Nan F (2018) A novel preparation and formation mechanism of carbon nanotubes aerogel. Carbon Lett 28:16
21. Fang CQ, Yang R, Zhang ZS, Zhou X, Lei WQ, Cheng YL, Zhang W, Wang D (2018) Effect of multi-walled carbon nanotubes on the physical properties and crystallisation of recycled PET/TPU composites. RSC Adv 8:892010.1039/C7RA13634J ↗