A facile strategy for enhanced performance of inverted organic solar cells based on low-temperature solution-processed SnO2 electron transport layer
Source abstract
Abstract
Abstract High-efficiency organic solar cells (OSCs) based on low-temperature (LT) processed SnO2 electron transport layer (ETL) are promising for their commercial use. However, high density of traps and large contact barrier for carriers at the interface between LT SnO2 and the active layer has been reported. To solve the problem, various interface modifying layer materials, such as PFN, has been introduced. Currently, the fabrication process of such interface modifying layer materials is complex and expensive. Herein, a facile strategy involved a polar solvent ethanolamine (EA) is introduced to modify LT SnO2 surface. By soaking the SnO2 film into EA solution in 2-Methoxyethanol (2-ME), EA can easily anchor into SnO2 film surface and forms a continuous monomolecular layer via dehydration reaction. The whole process is green and highly compatible with a roll-to-roll process. Further study suggests that the deep trap centers on SnO2 surface are substantially reduced and the built-in potential in OSCs is reinforced. Finally, OSCs based on EA-modified SnO2 demonstrated an enhanced power conversion efficiency from 10.71% to 12.45% which was comparable to those based on ZnO (12.26%) under the same experiment parameters. Our work boosts the development of the inverted OSCs with easy fabrication and compatibility with roll-to-roll process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
2. A chlorinated low-bandgap small-molecule acceptor for organic solar cells with 14.1% efficiency and low energy loss10.1007/s11426-018-9334-9 ↗
3. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
4. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor10.1002/adma.201800868 ↗
5. A highly efficient non-fullerene organic solar cell with a fill factor over 0.80 enabled by a fine-tuned hole-transporting layer10.1002/adma.201801801 ↗
6. Over 100-nm-Thick MoO x films with superior hole collection and transport properties for organic solar cells10.1002/aenm.201800698 ↗
7. Interfacial materials for organic solar cells: recent advances and perspectives10.1002/advs.201500362 ↗
8. Surface structure modification of ZnO and the impact on electronic properties10.1002/adma.201503404 ↗
9. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
10. Tin oxide (SnO x) as universal “Light-soaking” free electron extraction material for organic solar cells10.1002/aenm.201500277 ↗
11. Avoiding photoinduced shunts in organic solar cells by the use of tin oxide (SnO x) as electron extraction material instead of ZnO10.1002/aenm.201600347 ↗
12. SnO 2 : a wonderful electron transport layer for perovskite solar cells10.1002/smll.201801154 ↗
13. Review on the application of SnO 2 in perovskite solar cells10.1002/adfm.201802757 ↗
14. High-efficiency polymer solar cells with low temperature solution-processed SnO2/PFN as a dual-function electron transporting layer10.1039/C8TA06378H ↗
15. Reinforcing the built-in field for efficient charge collection in polymer solar cells10.1002/adfm.201705079 ↗
16. Interface investigation of the alcohol-/water-soluble conjugated polymer PFN as cathode interfacial layer in organic solar cells10.1063/1.4821223 ↗
17. 8.9% single-stack inverted polymer solar cells with electron-rich polymer nanolayer-modified inorganic electron-collecting buffer layers10.1002/aenm.201301692 ↗
18. Efficient solution-processed small-molecule solar cells with inverted structure10.1002/adma.201300295 ↗
19. High-efficiency and stable organic solar cells enabled by dual cathode buffer layers10.1021/acsami.7b15240 ↗
20. Origin of the enhanced open-circuit voltage in polymer solar cells via interfacial modification using conjugated polyelectrolytes10.1039/b921775d ↗
21. A high-efficiency organic solar cell enabled by the strong intramolecular electron push-pull effect of the nonfullerene acceptor10.1002/adma.201707170 ↗
22. Amine-based polar solvent treatment for highly efficient inverted polymer solar cells10.1002/adma.201302991 ↗
23. Achieving 10.5% efficiency for inverted polymer solar cells by modifying the ZnO cathode interlayer with phenols10.1039/C6TA07105H ↗
24. Dehydration of hydrous zirconia with methanol10.1111/j.1151-2916.1988.tb05871.x ↗
25. Physical properties of reactive sputtered tin-nitride thin films10.1016/S0042-207X(98)00271-1 ↗
26. Molecular structure of 3-aminopropyltriethoxysilane layers formed on silanol-terminated silicon surfaces10.1021/jp212056s ↗
27. Silane-capped ZnO nanoparticles for use as the electron transport layer in inverted organic solar cells10.1021/acsnano.8b01178 ↗
28. Characterization of SnO2 thin films grown from aqueous solutions10.1016/S0040-6090(00)00989-5 ↗
29. UV-sintered low-temperature solution-processed SnO 2 as robust electron transport layer for efficient planar heterojunction perovskite solar cells10.1021/acsami.7b04392 ↗
30. Photoluminescence of oxygen vacancies and hydroxyl group surface functionalized SnO 2 nanoparticles10.1039/C5CP00060B ↗
31. Enhanced electron tion using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
32. Universal energy-level alignment of molecules on metal oxides10.1038/nmat3159 ↗
33. Energy-level alignment at organic/metal and organic/organic interfaces10.1002/adma.200802893 ↗
34. A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells10.1126/science.aao5561 ↗
35. Enhanced efficiency in perovskite solar cells by eliminating electron contact barrier between the metal electrode and electron transport layer10.1039/C8TA10630D ↗
36. Trap-assisted recombination via integer charge transfer states in organic bulk heterojunction photovoltaics10.1002/adfm.201401513 ↗
37. Achieving a high fill factor for organic solar cells10.1039/C6TA00126B ↗
38. Moisture assisted perovskite film growth for high performance solar cells10.1063/1.4901510 ↗
39. Enhanced efficiency in plastic solar cells via energy matched solution processed NiO x interlayers10.1002/aenm.201100234 ↗
40. Photocurrent generation in polymer-fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
41. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗