Design of a MoOx/Au/MoOx transparent electrode for high-performance OLEDs
Source abstract
Abstract
Abstract A MoOx(top)/Au/MoOx(bottom) multilayer was systematically designed for transparent electrodes in green OLEDs in terms of optical transmission and series resistance of the device. The enhancement in optical transmission of MoOx/Au/MoOx (MAM) structures is a result of a series of events, including the optical interference within the multilayers and the interaction of light with surface plasmon polaritons in the metal layer. For the maximum transmission, the optical interference occurring within the multilayers was simulated using a transfer matrix model to determine the optimum thickness of MoOx layers, and then the thickness of the Au interlayer was experimentally optimized for extraordinary optical transmission. In addition, the series resistance added by the top MoOx was characterized to confirm its negligible impact on the performance of the device. The optimum MoOx (40 nm)/Au (10 nm)/MoOx (40 nm) structure showed much higher transmission in the green-red region and lower sheet resistance than indium tin oxide (ITO). We have fabricated MAM-based OLEDs the driving voltage of which was significantly reduced to ∼5.5 V at a current density of 20 mA/cm2, and the current efficiency (11.46 Cd/A) was higher than that (10.91 Cd/A) of ITO-based OLEDs, demonstrating that the MAM electrode is a potential replacement for ITO in optical devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · ZnO doping and properties · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Multiwalled carbon nanotube sheets as transparent electrodes in high brightness organic light-emitting diodes10.1063/1.3006436 ↗
2. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
3. Transparent heat-mirror films of TiO2/Ag/TiO2 for solar energy collection and radiation insulation10.1063/1.1655364 ↗
4. Dependence of film composition and thicknesses on optical and electrical properties of ITO–metal–ITO multilayers10.1016/S0040-6090(98)00520-3 ↗
5. Low resistivity transparent electrodes for displays on polymer substrates10.1016/S0040-6090(01)01053-7 ↗
6. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
7. Design of transparent anodes for resonant cavity enhanced light harvesting in organic solar cells10.1002/adma.201104273 ↗
8. The design of ZnS/Ag/ZnS transparent conductive multilayer films10.1016/S0040-6090(03)00141-X ↗
9. Cu-based multilayer transparent electrodes: a low-cost alternative to ITO electrodes in organic solar cells10.1016/j.solmat.2012.01.016 ↗
10. Highly flexible and transparent InZnSnOx∕Ag∕InZnSnOx multilayer electrode for flexible organic light emitting diodes10.1063/1.2937845 ↗
11. Highly flexible transparent electrodes for organic light-emitting diode-based displays10.1063/1.1806559 ↗
12. Unlocking the full potential of organic light-emitting diodes on flexible plastic10.1038/nphoton.2011.259 ↗
13. Transparent organic light emitting diodes using a multilayer oxide as a low resistance transparent cathode10.1063/1.2955528 ↗
14. Effects of ytterbium on electrical and optical properties of BCP/Ag/WO3 transparent electrode based organic photovoltaic cell selectron
15. Effect of Cu layer thickness on the structural, optical and electrical properties of AZO/Cu/AZO tri-layer films10.1016/j.vacuum.2010.03.008 ↗
16. Dielectric/metal/dielectric structures using copper as metal and MoO3 as dielectric for use as transparent electrode10.1016/j.tsf.2012.06.056 ↗
17. ITO/metal/ITO multilayer structures based on Ag and Cu metal films for high-performance transparent electrodes Sol10.1016/j.solmat.2008.02.038 ↗
18. Transparent organic light-emitting devices using a MoO3/Ag/MoO3 cathode10.1063/1.3662194 ↗
19. Transparent oxide/metal/oxide trilayer electrode for use in top-emitting organic light-emitting diodes10.1117/1.3592886 ↗
20. Flexible organic solar cells using an oxide/metal/oxide trilayer as transparent electrode10.1016/j.orgel.2012.05.047 ↗
21. High quality transparent TiO2/Ag/TiO2 composite electrode films deposited on flexible substrate at room temperature by sputtering10.1063/1.4808438 ↗
22. Influence of Au thickness on the optical and electrical properties of transparent and conducting TiO2/Au/TiO2 multilayer films10.1016/j.optcom.2009.12.067 ↗
23. Transparent conductive film having sandwich structure of gallium–indium-oxide/silver/gallium–indium-oxide10.1016/j.matlet.2006.12.053 ↗
24. Transparent conductive ITO/Ag/ITO multilayer electrodes deposited by sputtering at room temperature10.1016/j.optcom.2008.10.075 ↗
25. Plasmonics for improved photovoltaic devices10.1038/nmat2629 ↗
26. Rodrigo · 2012 · 37
27. Extraordinary optical transmission through sub-wavelength hole arrays10.1038/35570 ↗
28. Resonant optical transmission through thin metallic films with and without holes10.1364/OE.11.000482 ↗
29. Enhancement of light transmission by coupling to surface plasmon polaritons of a layer-plus-islands silver layer10.1063/1.3259426 ↗
30. Review paper: recent developments in light extraction technologies of organic light emitting diodes10.1007/s13391-011-0601-1 ↗
31. Coupling of photoluminescent centers in ZnO to localized and propagating surface plasmons10.1016/j.tsf.2009.12.049 ↗
32. Effects of hole depth on enhanced light transmission through subwavelength hole arrays10.1063/1.1526162 ↗
33. Conduction and transmission analysis in gold nanolayers embedded in zinc oxide for flexible electronics10.1063/1.3435467 ↗
34. A metallic molybdenum suboxide buffer layer for organic electronic devices10.1063/1.3432447 ↗
35. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
36. Molybdenum oxide MoOx: a versatile hole contact for silicon solar cells10.1063/1.4903467 ↗
37. The influence of hydrogenation and oxygen vacancies on molybdenum oxides work function and gap states for application in organic optoelectronics10.1021/ja3026906 ↗
38. Optical constants of the noble metals10.1103/PhysRevB.6.4370 ↗
39. Optical constants of aggregated gold films10.1364/JOSA.66.000124 ↗
40. Universal energy-level alignment of molecules on metal oxides10.1038/nmat3159 ↗
41. Improved luminous efficiency of organic light-emitting diodes by carrier trapping dopants10.1143/JJAP.40.L753 ↗
42. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
43. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
44. Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films10.1063/1.3231928 ↗