journal article·2014-11Open access

Investigation of the s-shape caused by the hole selective layer in bulk heterojunction solar cells

Lothar Sims, Ulrich Hörmann, Robert Hanfland, Roderick C.I. MacKenzie, F. René Kogler, Roland Steim, Wolfgang Brütting, Pavel Schilinsky

Organic Electronics· Volume 15· Issue 11

Abstract

Abstract A common failure mechanism of organic solar cells is the development of an s-shaped current voltage curve. Herein, we investigated the origin of this degradation mechanism by replacing the commonly used hole selective layer poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) with a co-evaporated layer of N,N′-bis(3-methylphenyl)-N,N′-bis(phenyl)benzidine (TPD) and Dipyrazino[2,3-f:2′,3′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile (HATCN). By varying the ratio of TPD to HATCN we are able to tune both the mobility and work function of the hole selective layer. Using a combination of field effect mobility measurements, Kelvin-Probe work function measurements, and numerical modeling we demonstrate that a degraded mobility of the hole selective layer leads to a buildup of charge within the device and reduction of fill factor.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Effect of lif/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
2. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
3. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗
4. Charge generation and recombination dynamics in Poly(3-hexylthiophene)/fullerene blend films with different regioregularities and morphologies10.1021/ja100302p ↗
5. Solar cell efficiency tables (version 39): Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
6. http://www.heliatek.com/newscenter/latest_news/neuer-weltrekord-fur-organische-solarzellen-heliatek-behauptet-sich-mit-12-zelleffizienz-als-technologiefuhrer/?lang=en (accessed August 19, 2014).
7. Environmental and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
8. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
9. Gravure printing for three subsequent solar cell layers of inverted structures on flexible substrates10.1016/j.solmat.2010.10.013 ↗
10. S-shaped current-voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
11. Origin of the kink in current-density versus voltage curves and efficiency enhancement of polymer-C60 heterojunction solar cells10.1109/JSTQE.2010.2040807 ↗
12. Identification of different origins for s-shaped current voltage characteristics in planar heterojunction organic solar cells10.1063/1.3692050 ↗
13. Imbalanced mobilities causing S-shaped IV curves in planar heterojunction organic solar cells10.1063/1.3553764 ↗
14. Influence of hole-transport layers and donor materials on open-circuit voltage and shape of I–V curves of organic solar cells10.1002/adfm.201002669 ↗
15. Work function of ITO substrates and band-offsets at the TPD/ITO interface determined by photoelectron spectroscopy10.1016/S0379-6779(99)00355-0 ↗
16. Organic light emitting devices based on exciplex interaction from blends of charge transport molecules10.1016/S0009-2614(03)00950-3 ↗
17. The role of energy level matching in organic solar cells—Hexaazatriphenylene hexacarbonitrile as transparent electron transport material10.1016/j.solmat.2010.11.024 ↗
18. Optimal negative electrodes for poly (3-hexylthiophene):[6, 6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices10.1063/1.2841067 ↗
19. Enhanced photovoltaic performance of zno nanoparticle/poly(phenylene vinylene) hybrid photovoltaic cells by semiconducting surfactant10.1016/j.orgel.2010.12.002 ↗
20. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
21. Reversible and irreversible degradation of organic solar cell performance by oxygen10.1016/j.solener.2010.09.007 ↗
22. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
23. Electronic structure of molybdenum-oxide films and associated charge injection mechanisms in organic devices10.1117/1.3555081 ↗
24. Molecular design for nonpolymeric organic dye glasses with thermal stability: relations between thermodynamic parameters and amorphous properties10.1021/j100125a025 ↗
25. Improved thermal stability of nonpolymeric organic glasses by doping with fullerene C6010.1063/1.123207 ↗
26. Bimolecular recombination in polymer/fullerene bulk heterojunction solar cells10.1063/1.2170424 ↗
27. The physical meaning of charge extraction by linearly increasing voltage transients from organic solar cells10.1063/1.4818267 ↗
28. Increasing organic solar cell efficiency with polymer interlayers10.1039/C2CP43876C ↗
29. Extracting microscopic device parameters from transient photocurrent measurements of P3HT:PCBM solar cells10.1002/aenm.201100709 ↗