Low-cost fabrication of organic rectifying diodes for high-speed AC/DC conversion
Source abstract
Abstract
Toward the establishment of low-cost manufacturing, ohmic contact formation techniques of organic devices should be developed without use of noble metals. In this study, organic diodes based on poly(3-hexylthiophene-2,5-diyl) (P3HT) were fabricated on FTO/glass substrates using non-noble metal (Al) anode electrodes and exhibited rectification behavior when depositing MoO x beneath the Al anode electrode. This suggests that an ohmic-like contact was selectively obtained due to the conduction path formed between the Fermi level of Al and charge-transfer state of P3HT. High-speed AC/DC conversion efficiency of P3HT-based rectifying diodes was investigated using a half-wave rectification circuit and compared to a commercially-available Si Schottky diode. Reduction in the rectifying characteristics of the half-wave rectification circuit using the P3HT devices with increasing the measurement frequency was discussed on the basis of equivalent circuit model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Semiconductor Devices and Circuit Design · Organic Electronics and Photovoltaics · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Contact engineering in organic field-effect transistors10.1016/j.mattod.2014.08.037 ↗
2. Influence of ambient condition on off-state current of polymer-blend transistors based on 6,13-bis(triisopropylsilylethynyl) pentacene with deposition of molybdenum trioxide10.35848/1347-4065/ac5fba ↗
3. Electronic structure of molybdenum-oxide films and associated charge injection mechanisms in organic devices10.1117/1.3555081 ↗
4. Inorganic hole transporting materials for stable and high efficiency perovskite solar cells
5. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
6. Ionization potential dependent air exposure effect on the MoO3/organic interface energy level alignment10.1016/j.orgel.2012.07.048 ↗
7. Observation of space-charge-limited current due to charge generation at interface of molybdenum dioxide and organic layer10.1063/1.3267082 ↗
8. Reduced molybdenum oxide as an efficient electron injection layer in polymer light-emitting diodes10.1063/1.3557502 ↗
9. P-type doping of organic wide band gap materials by transition metal oxides: a case-study on Molybdenum trioxide10.1016/j.orgel.2009.05.007 ↗
10. Electronic structure of anode interface with molybdenum oxide buffer layer10.1016/j.orgel.2009.10.013 ↗
11. Doping of organic semiconductors using molybdenum trioxide: a quantitative time-dependent electrical and spectroscopic study10.1002/adfm.201002696 ↗
12. High-performance organic thin-film transistors with metal oxide/metal bilayer electrode10.1063/1.2126140 ↗
13. 1 GHz pentacene diode rectifiers enabled by controlled film deposition on SAM-treated Au anodes10.1002/aelm.201500282 ↗
14. Organic diode rectifiers based on a high-performance conjugated polymer for a near-field energy-harvesting circuit10.1002/adma.201703782 ↗
15. Sze · 1981 · 264
16. Device characteristics of short-channel polymer field-effect transistors10.1063/1.3480549 ↗
17. An improved solar cell circuit model for organic solar cells10.1016/j.solmat.2005.05.017 ↗
18. An equivalent circuit approach to organic solar cell modelling10.1016/j.mejo.2008.01.053 ↗
19. Analysis of the dynamic short-circuit resistance in organic bulk-heterojunction solar cells: relation to the charge carrier collection efficiency10.1016/j.orgel.2013.02.039 ↗
20. Assessing the origin of the S-shaped I-V curve in organic solar cells: an improved equivalent circuit model10.1016/j.solmat.2013.11.018 ↗
21. Variations in the electric characteristics of an organic Schottky diode with the P3HT thickness10.3938/jkps.57.124 ↗
22. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
23. On the correlation of postannealing induced phase transition in pentacene with carrier transport10.1016/j.orgel.2008.03.005 ↗
24. Spray deposition of organic semiconducting thin-films: towards the fabrication of arbitrary shaped organic electronic devices10.1016/j.orgel.2010.02.018 ↗
25. High mobility p-channel organic field effect transistors on flexible substrates using a polymer-small molecule blend10.1016/j.synthmet.2009.07.012 ↗
26. Fabrication of organic thin-film transistors by spray-deposition for low-cost, large-area electronics10.1016/j.orgel.2010.09.008 ↗
27. Control of droplet morphology for inkjet-printed TIPS-pentacene transistors10.1016/j.mee.2012.01.006 ↗
28. Anisotropic charge transport and contact resistance of 6,13-bis(triisopropylsilylethynyl) pentacene field-effect transistors fabricated by a modified flow-coating method10.1063/1.3695169 ↗
29. Organic integrated circuits using room-temperature sintered silver nanoparticles as printed electrodes10.1016/j.orgel.2012.09.028 ↗
30. High-mobility, aligned crystalline domains of TIPS-pentacene with metastable polymorphs through lateral confinement of crystal growth10.1002/adma.201302439 ↗