journal article·2024-09

Optimization the potential of solution process fluorine passivated zinc oxide electron transport layer for stable InP-quantum dot light emitting diodes

Thuy Truong Thi, Nagarjuna Naik Mude, Nisha Vergineya S, Rasheeda Ansari, Ramchandra Pode, Jang Hyuk Kwon

Organic Electronics· Volume 132
Publisher page

Abstract

The pervasive use of zinc oxide (ZnO) as an electron transport layer in quantum dot (QD) electroluminescent devices is constrained due to its chemical instability with the QD layer and the formation of interface quenching sites. The effect of fluorine passivation of sol-gel processed ZnO in QD light-emitting devices (QLEDs) is investigated in depth. An examination of the interaction between the ZnO surface and fluorine species revealed that the passivation of oxygen vacancies and the formation of stable hydrogen bonds with hydroxyl groups on ZnO surface have a significant influence on the stability and efficiency of the device. Such exceptional functions of fluorine have been found to effectively capture defects at the interface between ZnO and the emissive layer, therefore mitigating the interface quenching sites. The initial fluorination device demonstrated a significant improvement in external quantum efficiency (EQE) from 5.72 % to 20.07 %, and half of the device lifetime (LT50 at an initial luminance of 1500 cd m −2) was 286 h. Further passivating the remaining active oxygen on the ZnO surface can extend the stability of the device to 542 h with an EQE of 15.2 %, which is among the longest lifetime reported so far for green InP-QLEDs. Our report offers the possibility of utilizing straightforward and highly effective fluorination by spin-coating technique to attain long-lasting InP-QLED devices with remarkable performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Quantum Dots Synthesis And Properties · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Solution-processed green and blue quantum-dot light-emitting diodes with eliminated charge leakage10.1038/s41566-022-00999-9 ↗
2. Over 30% external quantum efficiency light-emitting diodes by engineering quantum dot-assisted energy level match for hole transport layer
3. Functions and toxicity of cadmium in plants: recent advances and future prospects
4. Enhanced efficiency of InP-based red quantum dot light-emitting diodes10.1021/acsami.9b07437 ↗
5. Highly efficient green InP-based quantum dot light-emitting diodes regulated by inner alloyed shell component10.1038/s41377-022-00855-z ↗
6. Advances and challenges in heavy-metal-free InP quantum dot light-emitting diodes10.3390/mi13050709 ↗
7. Highly efficient and fully solution-processed inverted light-emitting diodes with charge control interlayers10.1021/acsami.8b05092 ↗
8. Polyethylenimine insulativity-dominant charge-injection balance for highly efficient inverted quantum dot light-emitting diodes10.1021/acsami.7b04662 ↗
9. High efficiency green InP quantum dot light-emitting diodes by balancing electron and hole mobility10.1038/s43246-021-00203-5 ↗
10. Efficient and stable blue quantum dot light-emitting diode10.1038/s41586-020-2791-x ↗
11. Highly efficient and stable InP/ZnSe/ZnS quantum dot light-emitting diodes10.1038/s41586-019-1771-5 ↗
12. Large-area quantum-dot light emitting diode arrays with ZnO nanoparticles as electron transport/injection layer10.1166/sam.2014.2013 ↗
13. Sol-gel-derived zinc oxide nanoparticles for electroluminescence enhancement of MEH-PPV OLEDs10.1080/15421406.2022.2152630 ↗
14. Significant improvement of near-UV electroluminescence from ZnO quantum dot LEDs via coupling with carbon nanodot surface plasmons10.1039/C7NR04392A ↗
15. Defects in zno
16. Green luminescence originates from surface defects in ZnO nanoparticles10.1016/j.physe.2006.07.022 ↗
17. Tailored ZnO functional nanomaterials for solution-processed quantum-dot light-emitting diodes10.1002/adpr.202200159 ↗
18. Revealing hole trapping in zinc oxide nanoparticles by time-resolved X-ray spectroscopy10.1038/s41467-018-02870-4 ↗
19. Suppressing degradation in QLEDs via doping ZnO electron transport layer by halides10.1002/adom.202300686 ↗
20. Tailoring the charge carrier dynamics in ZnO nanowires: the role of surface hole/electron traps10.1039/c2cp23425d ↗
21. Performance enhancement by sol-gel processed Ni-doped ZnO layer in InP-based quantum dot light-emitting diodes10.1016/j.orgel.2022.106696 ↗
22. Inverted quantum-dot light emitting diode using solution processed p-type WO x doped PEDOT: PSS and Li doped ZnO charge generation layer10.1021/acsami.5b06505 ↗
23. Metal-oxide stacked electron transport layer for highly efficient inverted quantum-dot light emitting diodes10.1021/acsami.6b10314 ↗
24. High-mobility sputtered F-doped ZnO films as good-performance transparent-electrode layers10.1016/j.jsamd.2021.05.004 ↗
25. Li and Mg Co-doped zinc oxide electron transporting layer for highly efficient quantum dot light-emitting diodes10.1021/acsami.8b04721 ↗
26. Controlled defects of fluorine-incorporated ZnO nanorods for photovoltaic enhancement
27. Anion-controlled passivation effect of the atomic layer deposited ZnO films by F substitution to O-related defects on the electronic band structure for transparent contact layer of solar cell applications10.1016/j.solmat.2014.09.029 ↗
28. Textured fluorine-doped zno films by atmospheric-pressure chemical vapor-deposition and their use in amorphous-silicon solar-cells10.1016/0379-6787(91)90076-2 ↗
29. Surface modification of ZnO layers via hydrogen plasma treatment for efficient inverted polymer solar cells10.1021/acsami.5b09533 ↗
30. Deterministic role of fluorine incorporation in the amorphous Zn-O-N semiconductors: first-principles and experimental studies10.1063/5.0069115 ↗
31. Efficiency enhancement of tris(dimethylamino)-phosphine-based red indium phosphide quantum-dot light-emitting diodes via chlorine-doped ZnMgO electron transport layers10.1021/acs.jpcc.0c07209 ↗
32. Bridging chloride anions enables efficient and stable InP green quantum-dot light-emitting diodes
33. Significant lifetime enhancement in QLEDs by reducing interfacial charge accumulation via fluorine incorporation in the ZnO electron transport layer10.1007/s40820-022-00970-x ↗
34. Development of transparent conductive indium and fluorine co-doped ZnO thin films: effect of F concentration and post-annealing temperature10.1016/j.tsf.2015.11.036 ↗
35. Transparent conductive aluminium and fluorine co-doped zinc oxide films via aerosol assisted chemical vapour deposition10.1039/C4RA09997D ↗
36. Fluorine-induced surface modification to obtain stable and low energy loss zinc oxide/perovskite interface for photovoltaic application10.1007/s42114-022-00498-z ↗
37. F-doped ZnO by sol-gel spin-coating as a transparent conducting thin film10.1007/s13391-011-0607-8 ↗
38. Good charge balanced inverted red InP/ZnSe/ZnS-quantum dot light-emitting diode with new high mobility and deep HOMO level hole transport layer10.1021/acsenergylett.0c02193 ↗
39. Stable ZnS electron transport layer for high-performance inverted cadmium-free quantum dot light-emitting diodes10.1021/acsami.2c14711 ↗
40. Bridging chloride anions enables efficient and stable InP green quantum‐dot light‐emitting diodes
41. Luminescence from zinc oxide nanostructures and polymers and their hybrid devices10.3390/ma3042643 ↗
42. Anion-controlled passivation effect of the atomic layer deposited ZnO films by F substitution to O-related defects on the electronic band structure for transparent contact layer of solar cell applications10.1016/j.solmat.2014.09.029 ↗
43. A comparative analysis of deep level emission in ZnO layers deposited by various methods
44. High-mobility sputtered F-doped ZnO films as good-performance transparent-electrode layers
45. Hydrogen enhancing Ga doping efficiency and electron mobility in high-performance transparent conducting Ga-doped ZnO films10.1016/j.jallcom.2020.158518 ↗
46. Ethanedithiol treatment on zinc oxide films for highly efficient quantum dot light-emitting diodes by reducing exciton quenching10.1364/JOSAB.379767 ↗
47. Methods of analysis of organic light emitting diodes
48. Solution-processed green and blue quantum-dot light-emitting diodes with eliminated charge leakage10.1038/s41566-022-00999-9 ↗
49. Bright colloidal quantum dot light-emitting diodes enabled by efficient chlorination10.1038/s41566-018-0105-8 ↗
50. Visible quantum dot light-emitting diodes with simultaneous high brightness and efficiency10.1038/s41566-019-0364-z ↗
51. Increased exciton dipole moment translates into charge-transfer excitons in thiophene-fluorinated low-bandgap polymers for organic photovoltaic applications10.1021/acs.chemmater.5b02948 ↗
52. Reducing energy loss via adjusting the anode work function and perovskite layer morphology for the efficient and stable hole transporting layer-free perovskite solar cells10.1016/j.cej.2021.133948 ↗
53. Dipole engineering through the orientation of interface molecules for efficient InP quantum dot light-emitting diodes10.1021/jacs.2c09705 ↗
54. First principles calculations of oxygen vacancy passivation by fluorine in hafnium oxide
55. Positive aging effect of ZnO nanoparticles induced by surface stabilization10.1021/acs.jpclett.0c01640 ↗
56. Surface passivation effect by fluorine plasma treatment on ZnO for efficiency and lifetime improvement of inverted polymer solar cells10.1039/C6TA03594A ↗
57. Control of carrier injection and transport in quantum dot light emitting diodes (QLEDs) via modulating Schottky injection barrier and carrier mobility10.1063/1.5123670 ↗
58. Thermal assisted up-conversion electroluminescence in quantum dot light emitting diodes10.1038/s41467-022-28037-w ↗