journal article·2023-09

Thiadiazole based π-conjugated small molecule as donor material for highly stable and efficient bulk heterojunction organic solar cells

Abdullah, Eun-Bi Kim, M. Shaheer Akhtar, Khalid Alotaibi, Anees A. Ansari, Sadia Ameen

Organic Electronics· Volume 120
Publisher page

Abstract

This paper demonstrates the designing of π-conjugated donor small organic molecule 4,7-bis(5-((E)-3,5-dimethoxystyryl)thiophen-2-yl)benzo[c][1,2,5]thiadiazole (BTD-2OMe) and its synthesis through the multistep synthetic routes from commercially available low cost precursor materials. The π-conjugated thiophene units interconnected with vinylene in BTD-2OMe favor the red shift absorption spectrum. Thermogravimetric (TGA) and differential scanning calorimetry (DSC) analysis of BTD-2OMe present excellent thermal stability up to ∼403 °C with only 3% weight loss and good crystallization of organic chromophore, respectively. The absorption band in solid state shows the red shift due to J-aggregation and a moderate optical bandgap of ∼1.81 eV with HOMO-LUMO energy levels of −5.35 and −3.54 eV has been obtained. The bulk heterojunction organic solar devices (BHJ-OSCs) have been fabricated and are systematically investigated with different BTD-2OMe:PC 71BM (1:1, 1:2, and 1:3, w/w) active layers. The optimized BTD-2OMe:PC 71 BM (1:2, w/w) device with improved active layer morphology and balanced energy level alignment achieves a high short circuit current density (Jsc) of ∼13.13 mAcm −2 and open-circuit voltage (Voc) of ∼0.924 V resulting in power conversion efficiency (PCE) of ∼6.72%. Importantly, the optimized BTD-2OMePC 71BM (1:2, w/w) device poses significantly high device stability of up to 15 days under ambient temperature by retaining ∼95% of PCE from its initial value.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
2. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
3. A symmetric benzoselenadiazole based D–A–D small molecule for solution processed bulk-heterojunction organic solar cells10.1016/j.jiec.2019.09.019 ↗
4. Recent progress on all‐small molecule organic solar cells using small‐molecule nonfullerene acceptors10.1002/inf2.12163 ↗
5. Single-junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
6. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
7. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
8. Small molecule carbazole-based diketopyrrolopyrroles with tetracyanobutadiene acceptor unit as a non-fullerene acceptor for bulk heterojunction organic solar cells10.1039/C6TA09607G ↗
9. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
10. Efficient ternary polymer solar cell using wide bandgap conjugated polymer donor with two non‐fullerene small molecule acceptors enabled power conversion efficiency of 16% with low energy loss of 0.47 eV10.1002/nano.202000146 ↗
11. Black phosphorus quantum dots based heterostucture boosting electron extraction for non-fullerene organic solar cells surpassing 15% power conversion efficiency10.1021/acsaem.1c00626 ↗
12. Approaching 16% efficiency in all-small-molecule organic solar cells based on ternary strategy with a highly crystalline acceptor10.1016/j.joule.2020.08.011 ↗
13. Over 15% efficiency all-small-molecule organic solar cells enabled by a C-shaped small molecule donor with tailorable asymmetric backbone10.1016/j.nanoen.2020.105612 ↗
14. Tuning energy levels of low bandgap semi-random two acceptor copolymers10.1021/ma400531v ↗
15. Increase in efficiency on using selenophene instead of thiophene in π-bridges for D-π-DPP-π-D organic solar cells10.1039/C9TA02415H ↗
16. Dual-accepting-unit design of donor material for all-small-molecule organic solar cells with efficiency approaching 11%10.1021/acs.chemmater.8b03980 ↗
17. Phenothiazine-based small-molecule organic solar cells with power conversion efficiency over 7% and open circuit voltage of about 1.0 v using solvent vapor annealing10.1039/C7CP08308D ↗
18. Synthesis and application of stilbenoid phenothiazine dendrimers as additives for dye-sensitized solar cells10.1039/C7QM00238F ↗
19. Cyclohexyl-substituted non-fullerene small-molecule acceptors for organic solar cells10.1039/D0NJ04240D ↗
20. Benzotriazole-based acceptor and donors, coupled with chlorination, achieve a high VOC of 1.24 v and an efficiency of 10.5% in fullerene-free organic solar cells10.1021/acs.chemmater.8b05316 ↗
21. Molecular origin of high field-effect mobility in an indacenodithiophene- benzothiadiazole copolymer10.1038/ncomms3238 ↗
22. Benzothiadiazole building units in solution-processable small molecules for organic photovoltaics10.1039/C6TA06241E ↗
23. Recent progress in fused-ring based nonfullerene acceptors for polymer solar cells10.3389/fchem.2018.00404 ↗
24. Synthesis of diketopyrrolopyrrole (DPP)-based small molecule donors containing thiophene or furan for photovoltaic applications10.1016/j.matchemphys.2013.10.020 ↗
25. New energetic indandione based planar donor for stable and efficient organic solar cells10.1016/j.solener.2020.03.023 ↗
26. Asymmetric A-D-π-A-type nonfullerene small molecule acceptors for efficient organic solar cells10.1039/C9TA06476A ↗
27. High-performance organic solar cells based on a small molecule with thieno[3,2-b]thiophene as π-bridge10.1016/j.orgel.2017.12.003 ↗
28. D-π-A-π-D structured diketopyrrolopyrrole-based electron donors for solution-processed organic solar cells10.1021/acsomega.8b01515 ↗
29. Research update: doping ZnO and TiO2 for solar cells10.1063/1.4833475 ↗
30. High-efficiency nonfullerene organic solar cells enabled by atomic layer deposited zirconium-doped zinc oxide10.1002/solr.202000241 ↗
31. The damaging effects of the acidity in PEDOT:PSS on semiconductor device performance and solutions based on non-acidic alternatives10.1039/C9MH01978B ↗
32. Effect of TiO2 modification with amino-based self-assembled monolayer on inverted organic solar cell10.1016/j.apsusc.2017.06.128 ↗
33. Flexible and semitransparent organic solar cells
34. Influence of donor groups on benzoselenadiazole-based dopant-free hole transporting materials for high performance perovskite solar cells10.1021/acsaem.0c02264 ↗
35. Abdullah
36. Dithienosilole-based small molecule donors for efficient all-small-molecule organic solar cells10.1016/j.dyepig.2018.06.006 ↗
37. A-π-D-π-A based porphyrin for solution processed small molecule bulk heterojunction solar cells10.1039/C5TA03463A ↗
38. Justifying benzoselenadiazole acceptor core as organic semiconductor for stable bulk-heterojunction organic solar cells at ambient temperature
39. Substitution effect on thiobarbituric acid end groups for high open-circuit voltage non-fullerene organic solar cells10.1021/acsami.0c11828 ↗
40. Enhancing exciton diffusion length provides new opportunities for organic photovoltaics10.1016/j.matt.2020.06.028 ↗
41. Effects of energy-level offset between a donor and acceptor on the photovoltaic performance of non-fullerene organic solar cells10.1039/C9TA04789A ↗
42. Simple bithiophene–rhodanine-based small molecule acceptor for use in additive-free nonfullerene OPVs with low energy loss of 0.51 eV10.1002/aenm.201804021 ↗
43. Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells10.1039/C3TA14236A ↗
44. Fill factor in organic solar cells10.1039/c3cp51383a ↗
45. Small molecule organic solar cells toward improved stability and performance for Indoor Light Harvesting Application10.1016/j.solmat.2021.111265 ↗
46. 17.1 %-Efficient eco-compatible organic solar cells from a dissymmetric 3D network acceptor10.1002/anie.202013053 ↗
47. Ternary organic solar cells with small nonradiative recombination loss10.1021/acsenergylett.9b00681 ↗
48. Versatile ternary organic solar cells: a critical review10.1039/C5EE02641E ↗
49. Efficiency enhancement of small molecule organic solar cells using hexapropyltruxene as an interface layer10.1039/C9TC06845G ↗
50. All-small-molecule organic solar cells with an ordered liquid crystalline donor10.1016/j.joule.2019.09.009 ↗
51. Spectroscopic investigation of the effect of microstructure and energetic offset on the nature of interfacial charge transfer states in polymer: fullerene blends10.1021/jacs.8b11484 ↗
52. Influence of blend morphology and energetics on charge separation and recombination dynamics in organic solar cells incorporating a nonfullerene acceptor10.1002/adfm.201704389 ↗
53. Sequential deposition enables high-performance nonfullerene organic solar cells10.1039/D1QM00407G ↗
54. Investigation of newly designed asymmetric chromophore in view of power conversion efficiency improvements for organic solar cells10.1016/j.matlet.2019.126865 ↗
55. Investigation of newly designed asymmetric chromophore in view of power conversion efficiency improvements for organic solar cells10.1016/j.matlet.2019.126865 ↗
56. Asymmetric, efficient π-conjugated organic semiconducting chromophore for bulk-heterojunction organic photovoltaics10.1016/j.dyepig.2017.09.048 ↗
57. Tuning electronic structures of thiazolo[5,4-d]thiazole-based holetransporting materials for efficient perovskite solar cells10.1016/j.solmat.2017.07.016 ↗