A biocompatible pressure sensor based on a 3D-printed scaffold functionalized with PEDOT:PSS for biomedical applications
Source abstract
Abstract
Abstract Personalized health-care monitoring, such as human motion and gait, can provide valuable information useful for prevention and diagnosis of a variety of diseases and also in patients rehabilitation. By employing suitable biocompatible materials that possess tunable compression properties related to 3D structure and able to convert the strain stimuli into a detectable signal, pressure sensors for human motion monitoring can be developed. In this study, our purpose is to obtain a conductive and biocompatible scaffold able to transform the mechanical deformations caused by an applied pressure to an electrical resistance variations. In particular, the effect of a conductive biocompatible functionalization with PEDOT:PSS polymer on thermoplastic silicone polycarbonate polyurethane (CarboSil) scaffold presenting five different structures have been studied by mechanical and electrical tests. The scaffold stiffness depends on structures features but it is not affected by the PEDOT:PSS coating. The electrical tests show a linear response on a wide range of pressure loads with all the tested polymeric scaffolds. Two scaffolds show the higher conductivity respect to other samples. Therefore, the scaffold structure network influences the electrical sensor response. The possibility to exploit the 3D printing tecnology with CarboSil paves the way to a new class of customizable, easy to manufacture and biocompatible integrated devices for medical applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Neuroscience and Neural Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Gait analysis methods: an overview of wearable and non-wearable systems, highlighting clinical applications10.3390/s140203362 ↗
2. Wearable stretch sensors for human movement monitoring and fall detection in ergonomics10.3390/ijerph17103554 ↗
3. Sensors and functionalities of non-invasive wrist-wearable devices: a review
4. Recent developments for flexible pressure sensors: a review10.3390/mi9110580 ↗
5. Recent advances in wearable tactile sensors: materials, sensing mechanisms, and device performance10.1016/j.mser.2017.02.001 ↗
6. Ultrathin, biocompatible, and flexible pressure sensor with a wide pressure range and its biomedical application10.1021/acssensors.9b02260 ↗
7. Wearable resistive pressure sensor based on highly flexible carbon composite conductors with irregular surface morphology10.1021/acsami.7b06119 ↗
8. Biocompatible inkjet resistive sensors for biomedical applications
9. Porous dielectric elastomer based ultra-sensitive capacitive pressure sensor and its application to wearable sensing device
10. Highly sensitive, flexible, and wearable pressure sensor based on a giant piezocapacitive effect of three-dimensional microporous elastomeric dielectric layer10.1021/acsami.6b04225 ↗
11. Application of 3D printing technology in bone tissue engineering10.1007/s42242-018-0021-2 ↗
12. Three-dimensional printed polylactic acid scaffolds promote bone-like matrix deposition in vitro10.1021/acsami.9b02502 ↗
13. 3D printed polyurethane scaffolds for the repair of bone defects10.3389/fbioe.2020.557215 ↗
14. The role of 3D printing in medical applications: a state of the art10.1155/2019/5340616 ↗
15. Comparison of 3D-printed poly-ε-caprolactone scaffolds functionalized with tricalcium phosphate, hydroxyapatite, bio-oss, or decellularized bone matrix10.1089/ten.tea.2016.0418 ↗
16. Conformational changes of fibrinogen after adsorption10.1021/jp054456k ↗
17. Origin of long-term storage stability and nitric oxide release behavior of CarboSil polymer doped with S-nitroso-N-acetyl- d -penicillamine10.1021/acsami.5b07501 ↗
18. Highly conductive PEDOT:PSS nanofibrils induced by solution-processed crystallization10.1002/adma.201304611 ↗
19. Electrical conductivity modulation of crosslinked composite nanofibers based on PEO and PEDOT:PSS10.1155/2018/3286901 ↗
20. Effective approaches to improve the electrical conductivity of PEDOT:PSS: a review10.1002/aelm.201500017 ↗
21. PEDOT:PSS for flexible and stretchable electronics: modifications, strategies, and applications10.1002/advs.201900813 ↗
22. Electronic control of Ca2+ signalling in neuronal cells using an organic electronic ion pump10.1038/nmat1963 ↗
23. Morphological and mechanical characterization of 3D printed PLA scaffolds with controlled porosity for trabecular bone tissue replacement10.1016/j.msec.2020.111528 ↗
24. All-polymeric pressure sensors based on PEDOT:PSS-modified polyurethane foam10.1021/acsapm.0c01389 ↗