journal article·2013-05

Fabrication and characterization of PEDOT nanowires based on self-assembled peptide nanotube lithography

Karsten Brandt Andersen, Nikolaj Ormstrup Christiansen, Jaime Castillo-León, Noemi Rozlosnik, Winnie Edith Svendsen

Organic Electronics· Volume 14· Issue 5
Publisher page

Abstract

In this article we demonstrate the use of self-assembled peptide nanotube structures as masking material in a rapid, mild and low cost fabrication of polymerized p-toluenesulfonate doped poly(3,4-ethylenedioxythiophene) (PEDOT:TsO) nanowire device. In this new fabrication approach the PEDOT:TsO nanowire avoids all contact with any organic solvents otherwise traditionally used in clean room fabrication. This can be achieved due to the intriguing properties of the self-assembled peptide nanotubes utilized as a dry etching mask for the patterning of the PEDOT:TsO nanowire. The peptide nanotubes, despite remaining stable during the reactive ion etching procedure, can be dissolved rapidly in water afterwards. The fabricated PEDOT:TsO nanowire devices exhibit excellent electrical characteristics. Finally, the potential of PEDOT:TsO nanowires as temperature sensors has been demonstrated and the high resolution of the sensor was illustrated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Molecular Junctions and Nanostructures · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Nanowire nanosensors for highly sensitive and selective detection of biological and chemical species10.1126/science.1062711 ↗
2. Novel poly-silicon nanowire field effect transistor for biosensing application10.1016/j.bios.2008.07.032 ↗
3. W.E. Svendsen, M. Jorgensen, L. Andresen, K.B. Andersen, M.B.B. Larsen, S. Skov, M. Dimaki, Silicon Nanowire as Virus Sensor in a Total Analysis System, Eurosensors XXV, 2011.10.1016/j.proeng.2011.12.071 ↗
4. Silicon nanowire biosensor for highly sensitive and rapid detection of dengue virus10.1016/j.snb.2010.02.021 ↗
5. Multiplexed electrical detection of cancer markers with nanowire sensor arrays10.1038/nbt1138 ↗
6. Challenges in the use of 1D nanostructures for on-chip biosensing and diagnostics: a review10.1016/j.bios.2010.07.041 ↗
7. Detection of cardiac biomarkers using single polyaniline nanowire-based conductometric biosensors10.3390/bios2020205 ↗
8. Highly sensitive single polyaniline nanowire biosensor for the detection of immunoglobulin G and myoglobin10.1016/j.bios.2011.01.001 ↗
9. Ultrasensitive protein detection using an aptamer-functionalized single polyaniline nanowire10.1039/c1cc11353d ↗
10. Non-lithographic fabrication of PEDOT nano-wires between fixed Au electrodes10.1016/j.orgel.2005.12.006 ↗
11. Electrical conductivity and current–voltage characteristics of individual conducting polymer PEDOT nanowires10.1088/0256-307X/25/9/102 ↗
12. Electrical properties of isolated poly(3,4-ethylenedioxythiophene) nanowires prepared by template synthesis10.1002/pat.1379 ↗
13. Precisely defined heterogeneous conducting polymer nanowire arrays – fabrication and chemical sensing applications10.1002/adma.200803292 ↗
14. Tuning the gas sensing performance of single PEDOT nanowire devices10.1039/c0an01000f ↗
15. Electrical conductivity studies on individual conjugated polymer nanowires: two-probe and four-probe results10.1007/s11671-009-9471-y ↗
16. Virus-polymer hybrid nanowires tailored to detect prostate-specific membrane antigen10.1021/ac203143y ↗
17. Virus-PEDOT nanowires for biosensing10.1021/nl1025826 ↗
18. A highly sensitive, label-free gene sensor based on a single conducting polymer nanowire10.1016/j.bios.2012.02.058 ↗
19. Critical issues in sensor science to aid food and water safety10.1021/nn204999j ↗
20. K.B. Andersen, J. Castillo-Leon, T. Bakmand, W.E. Svendsen, Alignment and use of self-assembled peptide nanotubes as dry-etching mask, Jpn. J. Appl. Phys. 51 (2012).10.1143/JJAP.51.06FF13 ↗
21. Self-assembled peptide nanotubes as an etching material for the rapid fabrication of silicon wires10.1007/s12668-011-0005-6 ↗
22. Manipulation of self-assembly amyloid peptide nanotubes by dielectrophoresis10.1002/elps.200800260 ↗
23. Detection of cancer cells using a peptide nanotube-folic acid modified graphene electrode10.1039/C2AN36121C ↗
24. Micro-“factory” for self-assembled peptide nanostructures10.1016/j.mee.2010.12.023 ↗
25. Electrostatic force microscopy of self-assembled peptide structures10.1002/sca.20231 ↗
26. Qualitative mapping of structurally different dipeptide nanotubes10.1021/nl801037k ↗
27. Stability of diphenylalanine peptide nanotubes in solution10.1039/C0NR00734J ↗
28. H. Kang, D. Kim, M. Song, Sensitivity enhancement of FBG temperature sensor, Optical Sensing and Detection Ii, 2012.10.1117/12.923271 ↗
29. T. Larsen, S. Schmid, L. Gronberg, A.O. Niskanen, J. Hassel, S. Dohn, A. Boisen, Ultrasensitive string-based temperature sensors, Appl. Phys. Lett. 98 (2011).10.1063/1.3567012 ↗
30. A.K. Pandey, O. Gottlieb, O. Shtempluck, E. Buks, Performance of an AuPd micromechanical resonator as a temperature sensor, Appl. Phys. Lett. 96 (2010).10.1063/1.3431614 ↗
31. Multifunctional ZnO-nanowire-based sensor10.1002/adfm.201101549 ↗
32. C.P. Wang, C.W. Liu, C. Gau, Silicon nanowire temperature sensor and its characteristic, in: NEMS 2011 – Sixth IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2011, pp. 630–633.10.1109/NEMS.2011.6017434 ↗
33. Carbon nanowire-based temperature sensor10.1002/pssa.200723152 ↗