journal article·2015-10

High performance airbrush spray coated organic solar cells via tuning the surface tension and saturated vapor pressure of different ternary solvent systems

Ding Zheng, Jiang Huang, Yifan Zheng, Junsheng Yu

Publisher page

Abstract

Abstract In this work, thieno [3,4-b] thiophene/benzodithiophene (PTB7): [6,6]-phenyl C71-butyric acid methyl ester (PC 71 BM) based organic solar cell (OSC) with a new record of power conversion efficiency (PCE) of ∼7.62% has been realized using airbrush spray (AS) coating method in air ambient which can be well compatible with large-scale fabrication. By investigating the physical mechanism of AS coated blend films, a series of ternary solvent systems (TSS) are used to simultaneous optimize the surface tension and the saturated vapor pressure of solution. Therefore, different TSS further controls the morphology of PTB7:PC 71 BM blend films precisely and systematically. It is elucidated that the chlorobenzene (CB)/o-Xylene (o-Xy)/1, 8-diiodoctane (DIO) TSS with a ratio of 37:60:3 vol.% could lead to a homogeneous surface morphology with a decreased aggregation domain size of active layer. In addition, the high fill factor, increased PC 71 BM absorption and internal quantum efficiency indicate the formation of bicontinuous interpenetrating and fully percolated networks with nanostructured phase separation in BHJ blend films. Ultimately, the AS coated OSCs based on the TSS of CB/o-Xy/DIO gains a 34% enhancement in PCE , compared with the conventional CB/DIO solvent based OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. Towards high performance organic photovoltaic cells: a review of recent development in organic photovoltaics10.3390/polym6092473 ↗
3. Flexible conjugated polymer-based plastic solar cells: from basics to applications10.1109/JPROC.2005.851491 ↗
4. Organic photovoltaic cells based on TPBi as a cathode buffer layer10.1016/j.solmat.2010.09.037 ↗
5. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
6. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
7. Understanding low bandgap polymer PTB7 and optimizing polymer solar cells based on it10.1002/adma.201400384 ↗
8. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
9. Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a similar to 300nm thick conventional single-cell device10.1039/C4EE01529K ↗
10. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
11. Spin-coated small molecules for high performance solar cells10.1002/aenm.201100230 ↗
12. Solution-processed organic solar cells10.1557/mrs2008.138 ↗
13. Spin-coated small molecules for high performance solar cells10.1002/aenm.201100230 ↗
14. Fabricating high performance, donoracceptor copolymer solar cells by spray-coating in air10.1002/aenm.201200713 ↗
15. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
16. Polymer solar cell by blade coating10.1016/j.orgel.2009.03.001 ↗
17. High performance organic semiconducting thin films: ink jet printed polythiophene rr-P3HT10.1016/S1566-1199(01)00011-8 ↗
18. High-performance organic solar cells with spray-coated hole-transport and active layers10.1002/adfm.201001562 ↗
19. Effect of in situ annealing on the performance of spray coated polymer solar cells10.1016/j.solmat.2013.01.011 ↗
20. Facile hot solvent vapor annealing for high performance polymer solar cell using spray process10.1016/j.solmat.2013.02.022 ↗
21. Enhancement of the performance of organic solar cells by electrospray deposition with optimal solvent system10.1016/j.solmat.2013.10.020 ↗
22. All-spray-coated semitransparent inverted organic solar cells: from electron selective to anode layers10.1016/j.orgel.2012.08.012 ↗
23. Effect of solution aging on morphology and electrical characteristics of regioregular P3HT FETs fabricated by spin coating and spray coating10.1016/j.orgel.2011.06.027 ↗
24. Concurrently pumped ultrasonic spray coating for donor: acceptor and thickness optimization of organic solar cells10.1016/j.orgel.2013.01.023 ↗
25. Effects of Damkhöler number of evaporation on the morphology of active layer and the performance of organic heterojunction solar cells fabricated by electrospray method10.1016/j.solmat.2014.11.029 ↗
26. Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation10.1063/1.2772766 ↗
27. Successive spray deposition of P3HT/PCBM organic photoactive layers: material composition and device characteristics10.1002/adfm.201200548 ↗
28. Facile external treatment for efficient nanoscale morphology control of polymer solar cells using a gas-assisted spray method10.1039/c0jm03899g ↗
29. Performance evaluation of an organic thin-film solar cell of PTB7:PC71BM with an alcohol-soluble polyelectrolyte interlayer prepared using the spray-coating method10.1021/ie5029649 ↗
30. Comparison of properties of polymer organic solar cells prepared using highly conductive modified PEDOT:PSS films by spin- and spray-coating methods10.7567/JJAP.53.01AB08 ↗
31. Learning from “coffee rings”: ordered structures enabled by controlled evaporative self-assembly10.1002/anie.201104454 ↗
32. Effect of two-step annealing on the performance of ternary polymer solar cells based on P3HT:PC71BM:SQ10.1016/j.solmat.2014.05.026 ↗
33. Use of interfacial energy density in a modified Bernoulli equation for characterization of spraying system10.1021/la00008a023 ↗
34. The impact of a single drop on a wetted solid surface10.1007/s003480050073 ↗
35. Determination of the P3HT:PCBM solubility parameters via a binary solvent gradient method: impact of solubility on the photovoltaic performance10.1016/j.solmat.2012.01.005 ↗
36. Relation between surface tension and density10.1039/tf9231900038 ↗
37. The variation of surface tension with temperature and some related functions10.1039/CT9242500032 ↗
38. Increase of electrospray throughput using multiplexed microfabricated sources for the scalable generation of monodisperse droplets10.1016/j.jaerosci.2005.05.011 ↗
39. Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells10.1039/c3ee41915k ↗
40. Understanding the morphology of PTB7:PCBM blends in organic photovoltaics10.1002/aenm.201301377 ↗
41. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
42. Morphological and topographical characterizations in spray coated organic solar cells using an additional solvent spray deposition10.1016/j.orgel.2011.09.009 ↗
43. Effects of different polar solvents for solvent vapor annealing treatment on the performance of polymer solar cells10.1016/j.orgel.2014.07.026 ↗
44. Absolute measurement of domain composition and nanoscale size distribution explains performance in PTB7:PC71BM solar cells10.1002/aenm.201200377 ↗
45. 25th anniversary article: bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
46. Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells10.1038/ncomms3867 ↗
47. Factors limiting device efficiency in organic photovoltaics10.1002/adma.201202873 ↗
48. Nongeminate and geminate recombination in PTB7:PCBM solar cells10.1002/adfm.201302134 ↗