Indoline as electron donor unit in “Push–Pull” organic small molecules for solution processed organic solar cells: Effect of the molecular π-bridge on device efficiency
Source abstract
Abstract
Abstract In this work we have synthesized and characterized four indoline-based small organic molecules for their use as electron donor moiety in bulk-heterojunction solution processed organic solar cells combined with PC70BM as electron acceptor. Our results show a wide range of light to energy efficiencies from 0.8% to 3.5% under standard measurement conditions. An initial analysis suggests that the main limitation is the device photocurrent due to the device film thickness. Yet, charge transfer dynamics were studied to correlate charge loss mechanisms to π-bridge structural variations and, moreover, mobility measurements were also carried out to fully explain these device limitations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. How to model the behavior of organic photovoltaic cells10.1002/pi.2038 ↗
2. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
5. Organic solar cells: a new look at traditional models10.1039/c1ee01663f ↗
6. Polymer solar cells10.1038/nphoton.2012.11 ↗
7. How could you measure your excitonic solar cells?10.1039/c2ee03429h ↗
8. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
9. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
10. Factors limiting device efficiency in organic photovoltaics10.1002/adma.201202873 ↗
11. Non-geminate recombination as the primary determinant of open-circuit voltage in polythiophene: fullerene blend solar cells: an analysis of the influence of device processing conditions10.1002/adfm.201100225 ↗
12. Nongeminate recombination and charge transport limitations in diketopyrrole-based solution processed small molecule solar cells10.1002/adfm.201202643 ↗
13. Solution-processable small molecules based on thieno[3,4-c]pyrrole-4,6-dione for high-performance solar cells10.1016/j.solmat.2011.12.018 ↗
14. Efficient solution-processed small-molecule solar cells with inverted structure10.1002/adma.201300295 ↗
15. Highly bendable large-area printed bulk heterojunction film prepared by the self-seeded growth of poly(3-hexylthiophene) nanofibrils10.1021/ma4003165 ↗
16. ITO-free photovoltaic cell utilizing a high-resolution silver grid current collecting layer10.1016/j.solmat.2013.01.043 ↗
17. Solution processed and high performance organic solar cells using small molecules with benzodithiophenes unit10.1021/ja403318y ↗
18. Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency10.1038/srep03356 ↗
19. Small-molecule solar cells with efficiency over 9%10.1038/nphoton.2014.269 ↗
20. Solution-processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10%10.1021/ja509703k ↗
21. Efficient small bandgap polymer solar cells with high fill factors for 300nm thick films10.1002/adma.201300017 ↗
22. From binary to ternary solvent: morphology fine-tuning of D/A blends in PDPP3T-based polymer solar cells10.1002/adma.201202855 ↗
23. Energy level modulation of HOMO, LUMO, and band-gap in conjugated polymers for organic photovoltaic applications10.1002/adfm.201201385 ↗
24. High-performance solar cells using a solution-processed small molecule containing benzodithiophene unit10.1002/adma.201102790 ↗
25. A planar small molecule with dithienosilole core for high efficiency solution-processed organic photovoltaic cells10.1021/cm202588h ↗
26. Non-basic high-performance molecules for solution-processed organic solar cells10.1002/adma.201201127 ↗
27. A new two-dimensional oligothiophene end-capped with alkyl cyanoacetate groups for highly efficient solution-processed organic solar cells10.1039/c3cc38920k ↗
28. A donor–acceptor–acceptor molecule for vacuum-processed organic solar cells with a power conversion efficiency of 6.4%10.1039/C2CC16390J ↗
29. Bulk heterojunction organic solar cells based on merocyanine colorants10.1039/b813341g ↗
30. Direct comparison of highly efficient solution- and vacuum-processed organic solar cells based on merocyanine dyes10.1002/adma.201000800 ↗
31. Vacuum-deposited small-molecule organic solar cells with high power conversion efficiencies by judicious molecular design and device optimization10.1021/ja301872s ↗
32. Relationship between the ionization and oxidation potentials of molecular organic semiconductors10.1016/j.orgel.2005.01.002 ↗
33. Molecular design and ordering effects in pi-functional materials for transistor and solar cell applications10.1021/ja2073643 ↗
34. Light soaking effects on charge recombination and device performance in dye sensitized solar cells based on indoline–cyclopentadithiophene chromophores10.1039/c3ta11242j ↗
35. Tuning of the photovoltaic parameters of molecular donors by covalent bridging10.1002/adfm.201300427 ↗
36. Efficient solution-processed bulk heterojunction solar cells by antiparallel supramolecular arrangement of dipolar donor–acceptor dyes10.1002/anie.201105133 ↗
37. A low-energy-gap organic dye for high-performance small-molecule organic solar cells10.1021/ja205126t ↗
38. Vacuum-deposited small-molecule organic solar cells with high power conversion efficiencies by judicious molecular design and device optimization10.1021/ja301872s ↗
39. Functionalized squaraine donors for nanocrystalline organic photovoltaics10.1021/nn204676j ↗
40. Charge carrier dynamics of vapor-deposited small-molecule/fullerene organic solar cells10.1021/ja403056y ↗
41. New molecular donors with dithienopyrrole as the electron-donating group for efficient small-molecule organic solar cells10.1021/cm5018147 ↗
42. The effect of branched versus linear alkyl side chains on the bulk heterojunction photovoltaic performance of small molecules containing both benzodithiophene and thienopyrroledione10.1039/C4CP00077C ↗
43. D–A-π-A featured sensitizers bearing phthalimide and benzotriazole as auxiliary acceptor: effect on absorption and charge recombination dynamics in dye-sensitized solar cells10.1021/am3001049 ↗
44. Organic D–A-π-A solar cell sensitizers with improved stability and spectral response10.1002/adfm.201001801 ↗
45. Formation of highly crystalline and texturized donor domains in DPP(TBFu)2:PC71BM SM-BJH devices via solvent vapour annealing: implications for device function10.1039/c2jm31235b ↗
46. Tailored merocyanine dyes for solution-processed BHJ solar cells10.1039/B916181C ↗
47. Charge transfer reactions in near ir absorbing small molecule solution processed organic bulk-heterojunction solar10.1016/j.orgel.2010.11.014 ↗
48. Charge extraction analysis of charge carrier densities in a polythiophene/fullerene solar cell: analysis of the origin of the device dark current10.1063/1.3006316 ↗
49. Experimental determination of the rate law for charge carrier decay in a polythiophene: fullerene solar cell10.1063/1.2891871 ↗
50. Measurements of efficiency losses in blend and bilayer-type zinc phthalocyanine/C60 high-vacuum-processed organic solar cells10.1021/jp3054422 ↗
51. Detection of trap charge in small molecular organic bulk heterojunction solar cells10.1103/PhysRevB.82.125204 ↗
52. Influence of diffusion on space-charge-limited current measurements in organic semiconductors10.3762/bjnano.4.18 ↗
53. Small molecules based on benzo[1,2-b:4,5-b′]dithiophene unit for high-performance solution-processed organic solar cells10.1021/ja306865z ↗
54. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
55. Efficient small molecule bulk heterojunction solar cells with high fill factors via pyrene-directed molecular self-assembly10.1002/adma.201103177 ↗
56. Limits on the fill factor in organic photovoltaics: distinguishing nongeminative and geminate recombination mechanisms10.1021/jz400140p ↗
57. Understanding the thickness-dependent performance of organic bulk heterojunction solar cells: the influence of mobility, lifetime, and space charge10.1021/jz301639y ↗
58. Imbalanced mobilities causing S-shaped IV curves in planar heterojunction organic solar cells10.1063/1.3553764 ↗