journal article·2024-10

Boosting thermoelectric performance of PEDOT: PSS/Bi2Te3 hybrid films via structural and interfacial engineering

Vaishali Rathi, Kamal Singh, K.P.S. Parmar, Ranjeet K. Brajpuriya, Ashish Kumar

Organic Electronics· Volume 133
Publisher page

Abstract

In this work, we synthesized poly(3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT: PSS) and PEDOT: PSS/Bi 2Te 3 hybrid composite film using a spin coating method. The maximum Seebeck coefficient (22 μVK −1) and power factor (57.18 μWm -1 K −2 around 300 K) were achieved at 0.4 wt% Bi 2Te 3. The electrical conductivity (σ) reached a maximum of 1467 Scm −1 at 300 K for 0.6 wt% Bi 2Te 3, which is more than three times higher than that of pure PEDOT: PSS. Two critical components contribute to the improved electrical transport performance, as identified by XRD, Raman spectroscopy, XPS, AFM, and SEM. First, the conductive polymer undergoes a structural transformation from a benzenoid to a quinoid configuration, enhancing conductivity. This transformation is due to the interaction between the π bonds of PEDOT: PSS and the Van der Waals forces between the tellurium (Te) atom layers of Bi 2Te 3. Second, the interfacial barrier between PEDOT: PSS and Bi 2Te 3 creates an energy-filtering effect that increases the Seebeck coefficient.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. n-Type Bi2Te3-xSex nanoplates with enhanced thermoelectric efficiency driven by wide-frequency phonon scatterings and synergistic carrier scatterings10.1021/acsnano.6b01156 ↗
2. Enhanced thermoelectric performance of nanostructured Bi2Te3 through significant phonon scattering10.1021/acsami.5b07596 ↗
3. Enhanced thermoelectric performance of single-walled carbon nanotubes/polyaniline hybrid nanocomposites10.1021/nn1002562 ↗
4. Toshima · 2002 · 81
5. Synthesis and thermoelectric properties of hydrochloric acid-doped polyaniline10.1016/j.synthmet.2010.03.001 ↗
6. Highly conductive PEDOT: PSS nanofibrils induced by solution‐processed crystallization10.1002/adma.201304611 ↗
7. Influence of imidazole‐based acidity control of PEDOT: PSS on its electrical properties and environmental stability10.1002/polb.24048 ↗
8. Scientific importance of water‐processable PEDOT–PSS and preparation, challenge and new application in sensors of its film electrode: a review10.1002/pola.28482 ↗
9. Acido-basic control of the thermoelectric properties of poly (3, 4-ethylenedioxythiophene) tosylate (PEDOT-Tos) thin films10.1039/C5TC01952D ↗
10. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
11. Water-processable polymer− nanocrystal hybrids for thermoelectrics10.1021/nl102880k ↗
12. Thermoelectric properties of Bi0. 5Sb1. 5Te3/polyaniline hybrids prepared by mechanical blending10.1016/S0167-577X(01)00381-0 ↗
13. Synthesis and characterization of Bi2Te3/polyaniline composites10.1016/j.mssp.2011.02.019 ↗
14. Organic–inorganic nanohybrids as novel thermoelectric materials: hybrids of polyaniline and bismuth (III) telluride nanoparticles10.1007/s11664-010-1403-1 ↗
15. Structure and electronic transport properties of polyaniline/NaFe4P12 composite
16. Redox intercalative polymerization of aniline in V2O5 xerogel. The postintercalative intralamellar polymer growth in polyaniline/metal oxide nanocomposites is facilitated by molecular oxygen10.1021/cm9600236 ↗
17. Improved thermoelectric performance of free-standing PEDOT: PSS/Bi 2 Te 3 films with low thermal conductivity10.1007/s11664-013-2587-y ↗
18. Facile preparation and thermoelectric properties of PEDOT nanowires/Bi 2 Te 3 nanocomposites10.1007/s10854-018-9834-1 ↗
19. Facile preparation and thermoelectric properties of Bi2Te3 based alloy nanosheet/PEDOT:PSS composite films10.1021/am5002772 ↗
20. Synthesis, characterization and enhanced thermoelectric performance of structurally ordered cable-like novel polyaniline–bismuth telluride nanocomposite10.1088/0957-4484/24/21/215703 ↗
21. Elevating thermoelectric performance by compositing dibromo-substituted thienoacene with SWCNTs10.1021/acsami.4c07042 ↗
22. Toward precision recognition of complex hand motions: wearable thermoelectrics by synergistic 2D nanostructure confinement and controlled reduction10.1002/adfm.202206083 ↗
23. Investigation of simultaneous carrier/phonon scattering and bipolar conduction effects in inorganic/organic composites: implications for thermoelectric performance10.1063/5.0160384 ↗
24. Apparatus for Seebeck coefficient measurement of wire, thin film, and bulk materials in the wide temperature range (80–650 K)10.1063/1.5116186 ↗
25. Structure of thin films of poly (3, 4-ethylenedioxythiophene)10.1016/S0379-6779(98)00315-4 ↗
26. Role of interchain coupling in the metallic state of conducting polymers10.1103/PhysRevLett.109.106405 ↗
27. Thermoelectric properties of reduced graphene oxide/Bi2Te3 nanocomposites
28. Effects of a base coating used for electropolymerization of poly(3,4-ethylenedioxythiophene) on indium tin oxide electrode10.1016/j.tsf.2006.05.015 ↗
29. In situ spectroelectrochemical Raman studies of poly(3,4-ethylenedioxythiophene) (PEDT)10.1021/ma9905674 ↗
30. Enhanced thermoelectric properties of PEDOT:PSS nanofilms by a chemical dedoping process10.1039/C3TA14960A ↗
31. Enhanced high temperature thermoelectric response of sulphuric acid treated conducting polymer thin films
32. Electrical properties of nitric acid and DMSO treated PEDOT: PSS/n‐Si hybrid heterostructures for optoelectronic applications10.1002/app.48952 ↗
33. In situ spectroelectrochemical Raman studies of poly(3,4-ethylenedioxythiophene) (PEDT)10.1021/ma9905674 ↗
34. Electrochemical oxidation of poly(3,4-ethylenedioxythiophene) — “in situ” conductivity and spectroscopic investigations10.1016/S0379-6779(99)00271-4 ↗
35. Highly efficient flexible organic light-emitting devices based on PEDOT:PSS electrodes doped with highly conductive Pyronin B10.1016/j.nanoen.2019.104027 ↗
36. Conductive CNT-and graphene-doped PEDOT:PSS thin films fabricated by ultrasonic spray coating
37. Enhanced polymer solar cells efficiency by surface coating of the PEDOT: PSS with polar solvent10.1016/j.solener.2016.02.003 ↗
38. Feasible tuning of barrier energy in PEDOT:PSS/Bi2Te3 nanowires-based thermoelectric nanocomposite thin films through polar solvent vapor annealing10.1016/j.nanoen.2019.104207 ↗
39. Bi2Te3 nanowires tuning PEDOT:PSS structure for significant enhancing electrical transport property10.1016/j.matlet.2023.134019 ↗
40. X-Ray photoelectron spectroscopy characterization of submicrometer-sized Polypyrrole−Polystyrene composites10.1021/la990443k ↗
41. Vapor-phase polymerization of poly(3, 4-ethylenedioxythiophene) nanofibers on carbon cloth as electrodes for flexible supercapacitors10.1088/0957-4484/27/38/385705 ↗
42. Tuning of charge carriers in Bi2Te3 thin films via swift heavy ion irradiation10.1007/s10854-022-09478-x ↗
43. Promising thermoelectric properties of commercial PEDOT:PSS materials and their Bi2Te3 powder composites10.1021/am100654p ↗
44. Improved thermoelectric behavior of nanotube-filled polymer composites with poly (3, 4-ethylenedioxythiophene) poly (styrenesulfonate)10.1021/nn9013577 ↗
45. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
46. Improved thermoelectric performance of free-standing PEDOT:PSS/Bi2Te3 films with low thermal conductivity10.1007/s11664-013-2587-y ↗
47. Scherrer · 2018
48. Thermal conductivity and elastic constants of PEDOT:PSS with high electrical conductivity10.1021/ma502099t ↗