journal article·2021-08

Modulating the middle and end-capped units of A2-A1-D-A1-A2 type non-fullerene acceptors for high VOC organic solar cells

Qiang Guo, Feng Li, Jianfeng Li, Yuzhang Xiao, Kunyuan Zuo, Ailing Tang, Bao Zhang, Erjun Zhou

Publisher page

Abstract

Abstract The power conversion efficiencies (PCEs) of organic solar cells (OSCs) have been improved rapidly in the last few years, due to the development of excellent non-fullerene acceptor (NFA) materials. However, compared to the high PCE, the open-circuit voltage (VOC) of OSCs is still relatively low. Recently, we have demonstrated that the “Same-A-Strategy” (SAS) is feasible to achieve high VOC, where the same electron-accepting (A) unit is utilized to construct polymer donor and NFA. To investigate the structure-properties relationship, here we chose six benzotriazole-based NFAs (BTA1, BTA11, BTA3, BTA13, BTA7 and BTA17) with A2-A1-D-A1-A2 type molecular backbone, where indacenodithiophene (IDT) and indacenodithieno[3,2-b]thiophene (IDTT) as middle electron-donating unit, rhodanine (R), 2-(1,1-dicyanomethylene)rhodanine (RCN), and malononitrile (M) as the terminal A2, respectively. When paired with a p-type polymer J52-Cl containing BTA unit, OSCs based on six material combinations can realize ultra-high VOC of 1.09–1.33 V with PCEs of 0.13–10.5%. The results indicate that the middle and end-capped units play a vital role to extend the application of SAS, and IDT and RCN are promising choices as the core and end-capped groups.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. “Plastic” solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
2. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
3. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
4. A low band gap N-type polymer based on dithienosilole and naphthalene diimide for all-polymer solar cells application10.1016/j.polymer.2015.03.010 ↗
5. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
6. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
7. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
8. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
9. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
10. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
11. 18% efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
12. A highly efficient non-fullerene organic solar cell with a fill factor over 0.80 enabled by a fine-tuned hole-transporting layer10.1002/adma.201801801 ↗
13. Design rules for donors in bulk-heterojunction solar cells—towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
14. The energy of charge-transfer states in electron donor–acceptor blends: insight into the energy losses in organic solar cells10.1002/adfm.200900090 ↗
15. Semiconducting π-conjugated systems in field-effect transistors: a material odyssey of organic electronics10.1021/cr100380z ↗
16. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
17. Understanding energy loss in organic solar cells: toward a new efficiency regime10.1016/j.joule.2017.09.020 ↗
18. Perylenediimide: phosphonium-based binary blended small-molecule cathode interlayer for efficient fullerene-free polymer solar cells with open circuit voltage to 1.0 V10.3866/PKU.WHXB201805101 ↗
19. Non-fullerene acceptor with low energy loss and high external quantum efficiency: towards high performance polymer solar cells10.1039/C6TA00612D ↗
20. High quantum efficiencies in polymer solar cells at energy losses below 0.6 eV10.1021/ja5131897 ↗
21. Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages10.1039/C6EE02598F ↗
22. The introduction of fluorine and sulfur atoms into benzotriazole‐based P‐type polymers to match with a benzotriazole‐containing N‐type small Molecule:“the same‐acceptor‐strategy” to realize high open‐circuit voltage10.1002/aenm.201801582 ↗
23. Benzotriazole-based acceptor and donors, coupled with chlorination, achieve a high VOC of 1.24 V and an efficiency of 10.5% in fullerene-free organic solar cells10.1021/acs.chemmater.8b05316 ↗
24. Simultaneously achieved high open‐circuit voltage and efficient charge generation by fine‐tuning charge‐transfer driving force in nonfullerene polymer solar cells10.1002/adfm.201704507 ↗
25. Controlling the cyano-containing A2 segments in A2-A1-D-A1-A2 type non-fullerene acceptors to combine with a benzotriazole-based p-type polymer: “same-acceptor-strategy” for high VOC organic solar cells10.1002/solr.201800332 ↗
26. Tuning the intermolecular interaction of A2-A1-D-A1-A2 type non-fullerene acceptors by substituent engineering for organic solar cells with ultrahigh VOC of ~1.2 V10.1007/s11426-020-9840-x ↗
27. Achievement of high Voc of 1.02 V for P3HT-based organic solar cell using a benzotriazole-containing non-fullerene acceptor10.1002/aenm.201602269 ↗
28. PTB7-Th based organic solar cell with a high Voc of 1.05 V by modulating the LUMO energy level of benzotriazole-containing non-fullerene acceptor10.1016/j.scib.2017.08.027 ↗
29. Incorporation of ester groups into low band-gap diketopyrrolopyrrole containing polymers for solar cell applications10.1039/c2jm31700a ↗
30. Bandgap modulation of dithienonaphthalene-based small-molecule acceptors for nonfullerene organic solar cells10.3866/PKU.WHXB201805151 ↗