journal article·2018-11

Charge carrier dynamics in PffBT4T-2OD: PCBM organic solar cells

Ramakant Sharma, Vinay Gupta, Hyunwoo Lee, Kunal Borse, Ram Datt, Chhavi Sharma, Mahesh Kumar, Seunghyup Yoo, Dipti Gupta

Publisher page

Abstract

Abstract We investigate the charge carrier dynamics of inverted organic solar cells (OSCs) based on PffBT4T-2OD: PCBM and PTB7: PCBM – the two leading systems among the OSCs based on polymer-fullerene bulk-heterojunction – to elucidate the origin of their performance difference. Transient absorption spectroscopy (TAS) and photo-electrochemical impedance spectroscopy (photo-EIS) were employed to unravel the photo-physics that govern the cell operation of these two highly efficient bulk heterojunction OSCs. While photo-EIS indicates that the two systems under study exhibit similar behavior in terms of recombination, TAS results reveal that PffBT4T-2OD: PCBM systems not only have higher charge generation rate but also more efficient charge transfer than PTB7: PCBM systems, leading to the power conversion efficiency of PffBT4T-2OD: PCBM-based OSCs (9.16%) that is higher than that of PTB7: PCBM-based OSCs (6.44%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Polymer photovoltaic cells - enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer-polymer forster resonance energy transfer significantly boosts the power conversion efficiency of bulk-heterojunction solar cells10.1002/adma.201501275 ↗
3. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
4. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
5. Organic photovoltaics10.1039/b812502n ↗
6. Interfacial disorder in efficient polymer solar cells: the impact of donor molecular structure and solvent additives10.1039/C7TA07924A ↗
7. 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and Indene-C-60 bisadduct by device optimization10.1002/adma.201001339 ↗
8. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
9. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
10. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
11. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
12. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
13. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
14. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
15. Charge Carrier transport and contact selectivity limit the operation of PTB7-based organic solar cells of varying active layer thickness10.1039/c3ta12358h ↗
16. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
17. Absolute measurement of domain composition and nanoscale size distribution explains performance in PTB7:PC71BM solar cells10.1002/aenm.201200377 ↗
18. Effect of incorporation of CdS NPs on performance of PTB7: PCBM organic solar cells10.1016/j.orgel.2016.03.030 ↗
19. Photo-physics of PTB7, PCBM and ICBA based ternary solar cells10.1016/j.orgel.2016.04.022 ↗
20. Ga-doped ZnO as an electron transport layer for PffBT4T-20D: PC70BM organic solar cells10.1016/j.orgel.2017.01.028 ↗
21. Device stability of inverted and conventional bulk heterojunction solar cells with MoO3 and ZnO nanoparticles as charge transport layers10.1016/j.orgel.2013.07.016 ↗
22. Effects of incorporation of copper sulfide nanocrystals on the performance of P3HT: PCBM based inverted solar cells10.1016/j.orgel.2014.06.035 ↗
23. Interface engineering through electron transport layer modification for high efficiency organic solar cells10.1039/C7RA13428B ↗
24. Efficient light trapping and interface engineering for performance enhancement in PTB7-Th: PC70BM organic solar cells10.1016/j.orgel.2016.11.016 ↗
25. Structural and ultrafast charge Carrier dynamics of in-situ synthesized rGO/Fe3O4 nanocomposite10.1016/j.matlet.2016.05.186 ↗
26. Metal oxide nanoparticles as an electron-transport layer in high-performance and stable inverted polymer solar cells10.1002/adma.201201958 ↗
27. Inverted vs standard PTB7:PC70BM organic photovoltaic devices. The benefit of highly selective and extracting contacts in device performance10.1016/j.orgel.2014.08.008 ↗
28. A comparison of five experimental techniques to measure charge Carrier lifetime in polymer/fullerene solar cells10.1002/aenm.201401345 ↗
29. Empowering semi-transparent solar cells with thermal-mirror functionality10.1002/aenm.201502466 ↗
30. Versatile multilayer transparent electrodes for ITO-free and flexible organic solar cells10.1109/JSTQE.2010.2041637 ↗
31. Cu-based multilayer transparent electrodes: a low-cost alternative to ITO electrodes in organic solar cells10.1016/j.solmat.2012.01.016 ↗
32. A two-step strategy to clarify the roles of a solution processed PFN interfacial layer in highly efficient polymer solar cells10.1039/C5TA05117G ↗