journal article·2015-09

Revealing the effect of donor/acceptor intermolecular arrangement on organic solar cells performance based on two-dimensional conjugated small molecule as electron donor

Qianqian Sun, Fujun Zhang, Qiaoshi An, Lingliang Li, Jian Wang, Miao Zhang, Wenbin Wang, Feng Teng, Jian Zhang

Publisher page

Abstract

A series of solution processed organic solar cells (OSCs) were fabricated with a two-dimensional conjugated small molecule SMPV1 as electron donor and fullerene derivatives PC71BM or ICBA as electron acceptor. The champion power conversion efficiency (PCE) of OSCs arrives to 7.05% for the cells with PC71BM as electron acceptor. A relatively large open circuit voltage (VOC) of 1.15 V is obtained from cells using ICBA as electron acceptor with an acceptable PCE of 2.54%. The fill factor (FF) of OSCs is 72% or 61% for the cells with PC71BM or ICBA as electron acceptor, which is relatively high value for small molecule OSCs. The relatively low performance of OSCs with ICBA as electron acceptor indicates that ICBA cannot play positive role in photoelectric conversion processes, which is very similar to the phenomenon observed from the OSCs with high efficient narrow band gap polymers other than P3HT as electron donor, the underlying reason is still in debate. The SMPV1 has strong self-assemble ability to form an ordered two dimensional lamellar structure, which provides an effective platform to investigate the effect of electron acceptor chemical structure on the performance of OSCs. Experimental results exhibit that ICBA molecules may prefer to vertical cross-intercalation among side chains of SMPV1, PC71BM molecules may have better miscibility with SMPV1 in the active layer. The different donor/acceptor (D/A) intermolecular arrangement strongly influences photon harvesting, exciton dissociation and charge carrier transport, which may provide a new sight on performance improvement of OSCs by adjusting D/A intermolecular arrangements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
2. 25th anniversary article: rise to power-OPV-based solar parks10.1002/adma.201302031 ↗
3. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
4. A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%10.1039/C4EE03048F ↗
5. Polymer homo-tandem solar cells with best efficiency of 11.3%10.1002/adma.201404220 ↗
6. Effect of solvent additive and ethanol treatment on the performance of PIDTDTQx: PC71BM polymer solar cells10.1016/j.solmat.2014.10.006 ↗
7. Tuning nanoscale morphology using mixed solvents and solvent vapor treatment for high performance polymer solar cells10.1039/C4RA09417D ↗
8. Transient photocurrent response of small-molecule bulk heterojunction solar cells10.1002/adma.201305160 ↗
9. Small-molecule solar cells with fill factors up to 0.75 via a layer-by-layer solution process10.1002/aenm.201300626 ↗
10. Effects of solvent additives on morphology, charge generation, transport, and recombination in solution-processed small-molecule solar cells10.1002/aenm.201301469 ↗
11. Solution-processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10%10.1021/ja509703k ↗
12. Small-molecule solar cells with efficiency over 9%10.1038/nphoton.2014.269 ↗
13. Solution-processed and high-performance organic solar cells using small molecules with a benzodithiophene unit10.1021/ja403318y ↗
14. A series of simple oligomer-like small molecules based on oligothiophenes for solution-processed solar cells with high efficiency10.1021/jacs.5b00305 ↗
15. Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency10.1038/srep03356 ↗
16. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
17. Combination of indene-C60 bis-adduct and cross-linked fullerene interlayer leading to highly efficient inverted polymer solar cells10.1021/ja108259n ↗
18. 6.5% Efficiency of polymer solar cells based on poly (3-hexylthiophene) and Indene-C60 Bisadduct by device optimization10.1002/adma.201001339 ↗
19. Enhanced open circuit voltage and efficiency of donor–acceptor copolymer solar cells by using indene-C60 bisadduct10.1021/cm300355e ↗
20. The investigation of donor–acceptor compatibility in bulk-heterojunction polymer systems10.1063/1.4816056 ↗
21. The effect of side-chain length on regioregular poly [3-(4-n-alkyl) phenylthiophene]/PCBM and ICBA polymer solar cells10.1039/c2jm31371e ↗
22. Understanding the reduced efficiencies of organic solar cells employing fullerene multiadducts as acceptors10.1002/aenm.201200673 ↗
23. Charge photogeneration for a series of thiazolo-thiazole donor polymers blended with the fullerene electron acceptors PCBM and ICBA10.1002/adfm.201203148 ↗
24. Simultaneous open-circuit voltage enhancement and short-circuit current loss in polymer: fullerene solar cells correlated by reduced quantum efficiency for photoinduced electron transfer10.1002/aenm.201200426 ↗
25. Photoinduced charge transfer in donor–acceptor (DA) copolymer: fullerene bis-adduct polymer solar cells10.1021/am302479u ↗
26. Competition between the charge transfer state and the singlet states of donor or acceptor limiting the efficiency in polymer: fullerene solar cells10.1021/ja210029w ↗
27. Recombination in polymer: fullerene solar cells with open-circuit voltages approaching and exceeding 1.0V10.1002/aenm.201200474 ↗
28. Molecular packing and solar cell performance in blends of polymers with a bisadduct fullerene10.1021/nl204421p ↗
29. A material combination principle for highly efficient polymer solar cells investigated by mesoscopic phase heterogeneity10.1039/c3nr03165a ↗
30. High open-circuit voltage small-molecule p-DTS (FBTTh2)2: ICBA bulk heterojunction solar cells-morphology, excited-state dynamics, and photovoltaic performance10.1039/C4TA06256F ↗
31. Enhanced performance of polymer solar cells by employing a ternary cascade energy structure10.1039/C4CP01411A ↗
32. Interfacial layer for efficiency improvement of solution-processed small molecular solar cells10.1016/j.solmat.2013.08.013 ↗
33. Origin of the tunable open-circuit voltage in ternary blend bulk heterojunction organic solar cells10.1021/ja3112143 ↗
34. A new fullerene-free bulk-heterojunction system for efficient high-voltage and high-fill factor solution-processed organic photovoltaics10.1002/adma.201405485 ↗
35. Efficient ternary blend polymer solar cells with indene-C60 bisadduct as an electron-cascade acceptor10.1039/c3ee44202k ↗
36. Intensity and wavelength dependence of bimolecular recombination in P3HT:PCBM solar cells: a white-light biased external quantum efficiency study10.1063/1.4801920 ↗
37. Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage10.1021/ja205977z ↗
38. Self-assembled monolayer modified ITO in P3HT:PC61BM organic solar cells with improved efficiency10.1016/j.solmat.2014.01.048 ↗
39. Evaluation of methods to extract parameters from current–voltage characteristics of solar cells10.1016/j.solener.2012.12.005 ↗
40. Recent development of the inverted configuration organic solar cells10.1016/j.solmat.2011.02.002 ↗
41. Fill factor in organic solar cells10.1039/c3cp51383a ↗