Dissolvable conducting polymer supercapacitor for transient electronics
Source abstract
Abstract
This work explores the use of a conducting polymer that can dissolve in mild aqueous conditions as a supercapacitor material for applications in transient electronics, biomedical devices, and biodegradable energy storage. A repeating polymer of methyl 1H-pyrrole-3-carboxylate monomer (“MPC polymer”) is prepared via electrochemical and chemical polymerization methods, and tested for the first time as a supercapacitor energy storage material. The MPC polymer exhibits charge storage performance comparable to pseudocapacitive conducting polymer polypyrrole (PPY), both as a planar electrode and as a composite porous electrode with poly ( l -lactic acid) (PLLA). Chronoamperometry charge-discharge results indicate that the MPC polymer stores energy as a pseudocapacitive material following a faradaic current model. Electrochemical impedance spectroscopy (EIS) measurements demonstrate that MPC polymer electrodes have lower equivalent series and charge transfer resistance compared to PPY electrodes. Cycle life testing of MPC polymer and PPY electrodes shows equal capacitance loss for both electrodes over 1100 cycles. After use as a supercapacitor electrode with an organic electrolyte, MPC polymer-based electrodes showed visible signs of degradation in a mild aqueous environment (37 °C, pH 8.2) in 8 h.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
2. Capacitive energy storage: current and future challenges10.1021/acs.jpclett.5b01199 ↗
3. Understanding supercapacitors based on nano-hybrid materials with interfacial conjugation10.1016/j.pnsc.2013.04.001 ↗
4. Ultrahigh surface area biomass derived 3D hierarchical porous carbon nanosheet electrodes for high energy density supercapacitors10.1016/j.carbon.2020.12.052 ↗
5. Titanium disulfide coated carbon nanotube hybrid electrodes enable high energy density symmetric pseudocapacitors10.1002/adma.201704754 ↗
6. Highly active ruthenium oxide coating via ALD and electrochemical activation in supercapacitor applications10.1039/C5TA03742E ↗
7. An environmentally friendly strategy to prepare nitrogen-rich hierarchical porous carbon for high-performance supercapacitors10.1039/C9CC08854G ↗
8. The recent development of polysaccharides biomaterials and their performance for supercapacitor applications10.1016/j.materresbull.2020.110839 ↗
9. Towards sustainable solid-state supercapacitors: electroactive conducting polymers combined with biohydrogels10.1039/C5TA08680A ↗
10. A new 3D composite of V2O5-based biodegradable ceramic material prepared by an environmentally friendly thermal method for supercapacitor applications10.1016/j.eti.2021.101474 ↗
11. High-performance green flexible electronics based on biodegradable cellulose nanofibril paper10.1038/ncomms8170 ↗
12. Transient electronics: dry transient electronic systems by use of materials that sublime10.1002/adfm.201606008 ↗
13. Implantable and biodegradable micro-supercapacitor based on a superassembled three-dimensional network Zn@ PPy hybrid electrode10.1021/acsami.0c19740 ↗
14. Biocompatible mesoporous hollow carbon nanocapsules for high performance supercapacitors
15. Biocompatible, high‐performance, wet‐adhesive, stretchable all‐hydrogel supercapacitor implant based on PANI@ rGO/mxenes electrode and hydrogel electrolyte10.1002/aenm.202101329 ↗
16. A new environmentally friendly gel polymer electrolyte based on cotton-PVA composited membrane for alkaline supercapacitors with increased operating voltage10.1007/s10853-021-05987-y ↗
17. Na-ion conducting gel polymer membrane for flexible supercapacitor application10.1016/j.electacta.2019.135322 ↗
18. A biodegradable gel electrolyte for use in high-performance flexible supercapacitors10.1021/am5070987 ↗
19. Lithium perchlorate doped plasticized chitosan and starch blend as biodegradable polymer electrolyte for supercapacitors10.1016/j.electacta.2012.06.032 ↗
20. Waste-Derived heteroatom-doped activated carbon/manganese dioxide trio-composite for supercapacitor applications10.1002/ente.201901402 ↗
21. In-situ O/N-heteroatom enriched activated carbon by sustainable thermal transformation of waste coffee grounds for supercapacitor material10.1016/j.est.2020.102113 ↗
22. Corn husk derived activated carbon with enhanced electrochemical performance for high-voltage supercapacitors10.1016/j.jpowsour.2020.228387 ↗
23. Conversion Syzygium oleana leaves biomass waste to porous activated carbon nanosheet for boosting supercapacitor performances10.1016/j.jmrt.2020.09.049 ↗
24. Food-materials-based edible supercapacitors10.1002/admt.201600059 ↗
25. All-wood, low tortuosity, aqueous, biodegradable supercapacitors with ultra-high capacitance10.1039/C6EE03716J ↗
26. Biologically derived melanin electrodes in aqueous sodium-ion energy storage devices10.1073/pnas.1314345110 ↗
27. Biodegradable magnesium/iron batteries with polycaprolactone encapsulation: a microfabricated power source for transient implantable devices10.1038/micronano.2015.24 ↗
28. Facile Co-electrodeposition method for high-performance supercapacitor based on reduced graphene oxide/polypyrrole composite film10.1021/acsami.7b03786 ↗
29. Electrochemically synthesized and vertically aligned carbon nanotube–polypyrrole nanolayers for high energy storage devices10.1016/j.sna.2014.07.010 ↗
30. A commercial conducting polymer as both binder and conductive additive for silicon nanoparticle-based lithium-ion battery negative electrodes10.1021/acsnano.6b00218 ↗
31. Uniform hierarchical Fe3O4@Polypyrrole nanocages for superior lithium ion battery anodes10.1002/aenm.201600256 ↗
32. A review of electrode materials for electrochemical supercapacitors10.1039/C1CS15060J ↗
33. Conductive polymers: towards a smart biomaterial for tissue engineering10.1016/j.actbio.2014.02.015 ↗
34. Capacitive energy storage in micro-scale devices: recent advances in design and fabrication of micro-supercapacitors10.1039/c3ee43526a ↗
35. Nanostructured conductive polymer gels as a general framework material to improve electrochemical performance of cathode materials in Li-ion batteries10.1021/acs.nanolett.6b05227 ↗
36. Flexible conducting polymer-based cellulose substrates for on-skin applications10.1016/j.msec.2019.110392 ↗
37. An ultrasensitive biosensor based on three-dimensional nanoporous conducting polymer decorated with gold nanoparticles for microRNA detection10.1016/j.microc.2020.105780 ↗
38. Polymers in biosensor devices for cardiovascular applications10.1016/j.cobme.2019.10.002 ↗
39. Biodegradable polymer-modified graphene/polyaniline electrodes for supercapacitors10.1016/j.synthmet.2017.03.005 ↗
40. Surface modified nanocellulose fibers yield conducting polymer-based flexible supercapacitors with enhanced capacitances10.1021/acsnano.5b02846 ↗
41. Asymmetric supercapacitors based on carbon nanofibre and polypyrrole/nanocellulose composite electrodes10.1039/C4RA15894F ↗
42. A novel electrically conductive and biodegradable composite made of polypyrrole nanoparticles and polylactide10.1016/j.biomaterials.2003.09.032 ↗
43. Synthesis of a novel, biodegradable electrically conducting polymer for biomedical applications10.1002/1616-3028(20020101)12:1<33::AID-ADFM33>3.0.CO;2-E ↗
44. Synthesis, characterization, and processing of new electroactive and photoactive polyesters derived from oligothiophenes10.1021/cm9701926 ↗
45. Erodible conducting polymers for potential biomedical applications10.1002/1521-3773(20020104)41:1<141::AID-ANIE141>3.0.CO;2-V ↗
46. Effects of crosslinked polycarboxylate superplasticizers with crosslinking agent containing ester and amide groups on the properties of cementitious systems10.1002/app.51171 ↗
47. Polyaniline and polypyrrole: a comparative study of the preparation10.1016/j.eurpolymj.2007.03.045 ↗
48. Preparation and characterization of polypyrrole-coated nanosized novel ceramics10.1021/la0012485 ↗
49. Nanostructured polypyrrole: enhancement in thermoelectric figure of merit through suppression of thermal conductivity10.1088/2053-1591/aa7b1f ↗
50. Polymer-films on electrodes .7. Electrochemical-behavior at polypyrrole-coated platinum and tantalum electrodes10.1149/1.2124000 ↗
51. A wearable fiber-shaped supercapacitor based on a poly (lactic acid) filament and high loading polypyrrole10.1039/C9RA02171J ↗
52. Electrochemical properties of lignin/polypyrrole composites and their carbonized analogues10.1016/j.matchemphys.2018.04.043 ↗
53. High-performance polypyrrole electrode materials for redox supercapacitors10.1016/j.elecom.2006.03.035 ↗