journal article·2021-10

Improved barrier and mechanical properties of Al2O3/acrylic laminates using rugged fluorocarbon layers for flexible encapsulation

Guixiong Chen, Yalian Weng, Fan Sun, Deming Hong, Xiongtu Zhou, Tailiang Guo, Yongai Zhang, Qun Yan, Chaoxing Wu, Lei Sun

Publisher page

Abstract

Abstract Thin film encapsulation (TFE) with high barrier performance and mechanical reliability is essential and challenging for flexible organic light-emitting diodes (OLEDs). In this work, SF6 plasma treatments were introduced for surface modifications of acrylic in Al2O3/acrylic laminates fabricated by atomic layer deposition (ALD) and ink-jet printing (IJP). It was found that micro-/nano-structures and surface fluoridation appeared on the surface of acrylic, and could be modulated by the discharge power and irradiation of plasma treatment. The water vapor transmission rates (WVTR) of Al2O3/acrylic multi-layers decreased evidently because of reducing surface polarity and strong cross-link of acrylic after plasma treatments. Furthermore, the rugged surface and relieved residual stress resulted from etching and heating of acrylic could enhance the mechanical property remarkably. The plasma treated Al2O3/acrylic multi-layers with only 3 dyads exhibited a low WVTR value of 1.02 × 10−6 g/m2/day and more stable mechanical property under 200 iterations blending test by comparative measurements, proving that the introduction of SF6 plasma surface modifications could improve simultaneously the barrier performance and mechanical reliability prominently of the inorganic/organic multi-layers with no need of extra neutral axis design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Organic Light-Emitting Diodes Research · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Organic light-emitting diodes: pushing toward the limits and beyond10.1002/adma.202070266 ↗
2. Advanced thin gas barriers film incorporating alternating structure of PEALD-based Al2O3/organic-inorganic nanohybrid layers10.1016/j.apsusc.2018.12.296 ↗
3. Light extraction enhancement in flexible organic light-emitting diodes by a light-scattering layer of dewetted Ag nanoparticles at low temperatures10.1021/acsami.8b07026 ↗
4. Built-in haze glass-fabric reinforced siloxane hybrid film for efficient organic light-emitting diodes (OLEDs)10.1002/adfm.201802944 ↗
5. Recent advances in flexible inorganic light emitting diodes: from materials design to integrated optoelectronic platforms10.1002/adom.201800936 ↗
6. Recent developments in flexible organic light-emitting devices10.1002/admt.201800371 ↗
7. Extremely high barrier performance of organic-inorganic nanolaminated thin films for organic light-emitting diodes10.1021/acsami.6b15404 ↗
8. Low-temperature atomic layer deposition of Al2O3/alucone nanolaminates for OLED encapsulation10.1039/C9RA02111F ↗
9. Improvement in the moisture barrier properties and flexibility by reducing hydrogen dangling bonds in SiNx thin films with plasma surface treatment10.1016/j.surfcoat.2019.125210 ↗
10. Hermetic seal for perovskite solar cells: an improved plasma enhanced atomic layer deposition encapsulation10.1016/j.nanoen.2019.104375 ↗
11. Outstanding memory characteristics with atomic layer deposited Ta2O5/Al2O3/TiO2/Al2O3/Ta2O5 nanocomposite structures as the charge trapping layer10.1016/j.apsusc.2018.10.197 ↗
12. High-performance multilayer thin-film encapsulation for organic micro-displays by inserting in situ plasma oxidized Al layers between SiOx layers
13. Fracture mechanics and oxygen gas barrier properties of Al2O3/ZnO nanolaminates on PET deposited by atomic layer deposition10.3390/nano9010088 ↗
14. Ultra gas-proof polymer hybrid thin layer10.1021/acs.nanolett.8b01855 ↗
15. Selective infiltration in polymer hybrid thin films as a gas-encapsulation layer for stretchable electronics10.1021/acsami.9b19269 ↗
16. Alucone interlayers to minimize stress caused by thermal expansion mismatch between Al2O3 films and teflon substrates10.1021/am303077x ↗
17. A study on the growth behavior and stability of molecular layer deposited alucone films using diethylene glycol and trimethyl aluminum precursors, and the enhancement of diffusion barrier properties by atomic layer deposited Al2O3 capping10.1021/acsami.6b00762 ↗
18. Reliable high temperature, high humidity flexible thin film encapsulation using Al2O3/MgO nanolaminates for flexible OLEDs10.1007/s12274-020-2915-5 ↗
19. Composite encapsulation films with ultrahigh barrier performance for improving the reliability of blue organic light-emitting diodes
20. Thin film encapsulation for the organic light-emitting diodes display via atomic layer deposition10.1557/jmr.2019.331 ↗
21. Influence of the polymeric substrate on the water permeation of alumina barrier films deposited by atomic layer deposition10.1016/j.surfcoat.2017.12.056 ↗
22. Open-air plasma-deposited multilayer thin-film moisture barriers10.1021/acsami.0c01493 ↗
23. Effects of embedded SiO2 nanoparticles on the moisture barrier performance of inorganic/organic laminates10.1007/s10854-019-02478-4 ↗
24. Electrical evaluation of crack generation in SiNx and SiOxNy thin-film encapsulation layers for OLED displays10.1016/j.apsusc.2016.02.142 ↗
25. Cross-linked lignin coatings produced by UV light and SF6 plasma treatments10.1016/j.porgcoat.2018.12.017 ↗
26. Surface modification of polyamide nanofiber membranes by polyurethane to simultaneously improve their mechanical strength and hydrophobicity for breathable and waterproof applications10.1016/j.porgcoat.2019.02.012 ↗
27. Electrical and optical properties of transparent flexible electrodes: effects of UV ozone and oxygen plasma treatments10.1016/j.orgel.2014.01.002 ↗
28. Harnessing dynamic wrinkling surfaces for smart displays10.1021/acs.nanolett.9b05279 ↗
29. Design and fabrication of bi-functional TiO2/Al2O3 nanolaminates with selected light extraction and reliable moisture vapor barrier performance10.1088/1361-6528/aaf4e1 ↗
30. New CH4-N-2 dry etch chemistry for poly(methyl methacrylate) removal without consuming polystyrene for lamellar copolymers application10.1116/1.5090395 ↗
31. Hydrophobic and superhydrophobic surfaces fabricated using atmospheric pressure cold plasma technology: a review10.1016/j.cis.2018.03.009 ↗
32. Characterization of photoresist films exposed to high-dose implantation conditions10.1116/1.5004127 ↗
33. Hydrophobization of polymer particles by tetrafluoromethane (CF4) plasma irradiation using a barrel-plasma-treatment system10.1016/j.apsusc.2013.07.103 ↗
34. Fluorination of polymethylmethacrylate with SF6 and hexafluoropropylene using dielectric barrier discharge system at atmospheric pressure10.1016/j.surfcoat.2007.01.028 ↗
35. Direct fluorination of polymers-From fundamental research to industrial applications10.1016/j.porgcoat.2007.09.027 ↗
36. Fluorination of polymethylmethaacrylate with tetrafluoroethane using DC glow discharge plasma10.1016/j.apsusc.2008.03.045 ↗
37. Synthesis of fluorinated polymers by chemical modification10.1016/S0079-6700(02)00004-7 ↗
38. Sulfur hexafluoride (SF6) plasma treatment of medical grade poly(methyl methacrylate)10.3390/coatings10020135 ↗
39. Simple method for lowering poly(methyl methacrylate) surface energy with fluorination10.1038/pj.2014.91 ↗
40. The lowest surface free energy based on -CF3 alignment10.1021/la981727s ↗
41. Recent progress of atomic layer deposition on polymeric materials10.1016/j.msec.2016.01.093 ↗
42. Versatility of bilayer metal oxide coatings on silver nanowire networks for enhanced stability with minimal transparency loss10.1039/C9NR05658K ↗
43. Wearable and washable conductors for active textiles10.1021/acsami.7b07361 ↗
44. A mechanically enhanced hybrid nano-stratified barrier with a defect suppression mechanism for highly reliable flexible OLEDs10.1039/C7NR01166K ↗
45. Effect of Ultrasonic Nanocrystal Surface Modification on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy10.1016/j.msea.2017.11.043 ↗
46. Graphite nanoplatelets grafted with PMMA and the properties of GNPs-PMMA/epoxy composites
47. Thermal properties of plasma-sprayed multilayer Al2O3/yttria-stabilized zirconia coating10.1166/jnn.2020.17271 ↗