Enhanced JSC of P3HT-based non-fullerene polymer solar cells by modulating aggregation effect of P3HT in solution state
Source abstract
Abstract
Abstract Poly(3-hexylthiophene) (P3HT) is a broadly used donor material for polymer solar cells (PSCs) due to its simple molecular structure and low production cost. In recent years, the P3HT-based non-fullerene PSCs have been extensively studied as the rapid development of the non-fullerene small molecular acceptors (NFSMAs). However, the active layers based on the P3HT and NFSMAs blend usually exhibit unfavorable phase separation morphologies, resulting in relatively low short-circuit currents (JSCs) and power conversion efficiencies (PCEs) of the corresponding PSC devices. Herein, we utilized the chloroform (CF)/anisole solvent mixture to adjust the aggregation effect of P3HT in solution state to optimize the phase separation morphology of the active layers. As a result, the combination of CF, anisole, and 1,8-diiodooctane (DIO) affords an enhanced JSC of 14.23 mA cm−2 for a P3HT:IEICO-based PSC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
3. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
4. Polymer solar cells10.1038/nphoton.2012.11 ↗
5. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
6. Toward solution-processed high-performance polymer solar cells: from material design to device engineering10.1021/acs.chemmater.6b02802 ↗
7. A silole copolymer containing a ladder-type heptacylic arene and naphthobisoxadiazole moieties for highly efficient polymer solar cells10.1039/C4EE03642E ↗
8. S,N-Heteroacene-Based copolymers for highly efficient organic field effect transistors and organic solar cells: critical impact of aromatic subunits in the ladder π-system10.1021/acsami.7b15584 ↗
9. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor
10. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
11. A highly efficient non-fullerene organic solar cell with a fill factor over 0.80 enabled by a fine-tuned hole-transporting layer10.1002/adma.201801801 ↗
12. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
13. P3HT:PCBM, Best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
14. From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective10.1039/c3ee43460e ↗
15. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
16. Using resonance energy transfer to improve exciton harvesting in organic–inorganic hybrid photovoltaic cells10.1002/adma.200501307 ↗
17. Poly(3-hexylthiophene): synthetic methodologies and properties in bulk heterojunction solar cells10.1039/c2ee22129b ↗
18. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
19. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
20. Key components to the recent performance increases of solution processed non-fullerene small molecule acceptors10.1039/C5TA04310G ↗
21. More than conformational “twisting” or “coplanarity”: molecular strategies for designing high-efficiency nonfullerene organic solar cells10.1021/acs.chemmater.5b04339 ↗
22. Recent progress in non-fullerene small molecule acceptors in organic solar cells (OSCs)10.1039/C6TC05066B ↗
23. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
24. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
25. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
26. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
27. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
28. Achievement of high VOC of 1.02 V for P3HT-based organic solar cell using a benzotriazole-containing non-fullerene acceptor10.1002/aenm.201602269 ↗
29. Non-fullerene acceptors with A2=A1-D-A1=A2 skeleton containing benzothiadiazole and thiazolidine-2,4-Dione for high-performance P3HT-based organic solar cells
30. Poly(3-hexylthiophene)-based non-fullerene solar cells achieve high photovoltaic performance with small energy loss10.1039/C7TA05108E ↗
31. A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage10.1039/C5EE03481G ↗
32. A planar electron acceptor for efficient polymer solar cells10.1039/C5EE02477C ↗
33. A rhodanine flanked nonfullerene acceptor for solution-processed organic photovoltaics10.1021/ja5110602 ↗
34. Nonfullerene small molecular acceptors with a three-dimensional (3D) structure for organic solar cells10.1021/acs.chemmater.6b03323 ↗
35. Azadipyrromethene-based Zn(II) complexes as nonplanar conjugated electron acceptors for organic photovoltaics10.1002/adma.201400647 ↗
36. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
37. “Plastic” solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
38. Effect of the fibrillar microstructure on the efficiency of high molecular weight diketopyrrolopyrrole‐based polymer solar cells10.1002/adma.201304360 ↗
39. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
40. Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark poly(3-hexylthiophene):[6,6]-Phenyl-C61-butyric acid methyl ester system10.1021/cr300005u ↗
41. Highly efficient ternary polymer solar cells by optimizing photon harvesting and charge Carrier transport10.1016/j.nanoen.2016.02.032 ↗
42. Nematic liquid crystal materials as a morphology regulator for ternary small molecule solar cells with power conversion efficiency exceeding 10%10.1039/C7TA00211D ↗
43. Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5%10.1039/C8EE00215K ↗
44. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
45. Design of donor polymers with strong temperature-dependent aggregation property for efficient organic photovoltaics10.1021/acs.accounts.7b00293 ↗
46. Optimal extent of fluorination enabling strong temperature-dependent aggregation, favorable blend morphology and high-efficiency polymer solar cells10.1007/s11426-016-0378-y ↗
47. A fluorinated polythiophene derivative with stabilized backbone conformation for highly efficient fullerene and non-fullerene polymer solar cells10.1021/acs.macromol.6b00248 ↗
48. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
49. Extending π-conjugation system with benzene: an effective method to improve the properties of benzodithiophene-based polymer for highly efficient organic solar cells10.1021/ma501756p ↗
50. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
51. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗
52. Recombination‐limited photocurrents in low bandgap polymer/fullerene solar cells10.1002/adfm.200801514 ↗
53. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
54. Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells10.1063/1.1889240 ↗
55. Intensity dependence of current–voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
56. Interplay of intramolecular noncovalent coulomb interactions for semicrystalline photovoltaic polymers10.1021/acs.chemmater.5b02251 ↗
57. Electrical characteristics and efficiency of single-layer organic light-emitting diodes10.1103/PhysRevB.58.R13411 ↗
58. Synthesis and photovoltaic properties of the copolymers of 2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylene vinylene and 2,5-thienylene-vinylene10.1016/j.synthmet.2005.03.007 ↗
59. Charge transport and recombination in bulk heterojunction solar cells studied by the photoinduced charge extraction in linearly increasing voltage technique10.1063/1.1882753 ↗
60. Photo‐carrier recombination in polymer solar cells based on P3HT and silole‐based copolymer10.1002/aenm.201100300 ↗
61. A comparison of five experimental techniques to measure charge carrier lifetime in polymer/fullerene solar cells10.1002/aenm.201401345 ↗
62. A SAXS/WAXS/GISAXS beamline with multilayer monochromator
63. Achieving highly efficient nonfullerene organic solar cells with improved intermolecular interaction and open-circuit voltage10.1002/adma.201700254 ↗