Fast and sensitive polymer photodetectors with extra high external quantum efficiency and large linear dynamic range at low working voltage bias
Source abstract
Abstract
Abstract An extra high quantum efficiency (EQE) exceeding 100% can be obtained in organic photomultiplication photodetectors which generally exhibit either low response speed or high working voltage. In this work, a fast and sensitive polymer photoconductive detector with an over 10000% EQE is demonstrated, which requires a low negative working voltage of around −0.8 V. In the device, a poly (3-hexylthiophene) (P3HT):(phenyl-C61-butyric-acid-methyl-ester) (PC61BM) bulk heterojunction (BHJ) film is used as the photo-active layer with a polyethylenimine ethoxylated (PEIE) modified ITO electrode. By adjusting the PC61BM: P3HT weight ratio from 2: 3 to 9: 1 gradually in the device, the photodetector performances can be dramatically varied: the EQEs can achieve from about 1000% to 12000%; the responsivities can reach from 4 A/W to 54 A/W; and the detectivities are up to 1012 Jones. Among these devices, the optimized device has a high EQE of about 12000%, a fast response time of 24 μs (rise time), and a large linear dynamic range of 79 dB at around −0.8 V bias. With the help of transmission electron microscope images (TEM), light-assisted capacitance-voltage (C-V), and transient photocurrent measurements, the fullerene concentration effect in the device has been investigated. This methodology provides a universal guidance for understanding and developing photomultiplication type polymer photodetectors with various spectral responses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. High-detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm10.1126/science.1176706 ↗
2. Dark current reduction strategies using edge-on aligned donor polymers for high detectivity and responsivity organic photodetectors10.1039/C7PY00497D ↗
3. Highly sensitive near infrared organic phototransistors based on conjugated polymer nanowire networks10.1016/j.orgel.2017.05.029 ↗
4. Charge-integrating organic heterojunction phototransistors for wide-dynamic-range image sensors10.1038/nphoton.2017.15 ↗
5. Photomultiplication photodetectors with P3HT:fullerene-free material as the active layers exhibiting a broad response10.1039/C6NR00079G ↗
6. Thick junction broadband organic photodiodes10.1002/lpor.201400081 ↗
7. High sensitivity, fast response and low operating voltage organic photodetectors by incorporating a water/alcohol soluble conjugated polymer anode buffer layer10.1039/C6RA26750E ↗
8. Deep ultraviolet-to-NIR broad spectral response organic photodetectors with large gain10.1039/C5TC04188K ↗
9. Bulk photoconductive gain in pentacene thin films10.1063/1.3043431 ↗
10. Polymer–nanocrystal hybrid photodetectors with planar heterojunctions designed strategically to yield a high photoconductive gain10.1063/1.4807422 ↗
11. Trap-assisted large gain in Cu2O/C60 hybrid ultraviolet/visible photodetectors10.1063/1.4947581 ↗
12. A nanocomposite ultraviolet photodetector based on interfacial trap-controlled charge injection10.1038/nnano.2012.187 ↗
13. Trap engineering of CdTe nanoparticle for high gain, fast response, and low noise P3HT:CdTe nanocomposite photodetectors10.1002/adma.201502292 ↗
14. Trap-assisted photomultiplication polymer photodetectors obtaining an external quantum efficiency of 37,500%10.1021/acsami.5b00041 ↗
15. Achieving EQE of 16,700% in P3HT:PC71BM based photodetectors by trap-assisted photomultiplication10.1038/srep09181 ↗
16. Broadband gain in poly(3-hexylthiophene):phenyl-C61-butyric-acid-methyl-ester photodetectors enabled by a semicontinuous gold interlayer10.1063/1.4898000 ↗
17. High sensitivity and fast response solution processed polymer photodetectors with polyethylenimine ethoxylated (PEIE) modified ITO electrode10.1364/OE.25.007719 ↗
18. Composition-dependent phase separation effects of organic solar cells using P3HT:PCBM as active layer and chromium oxide as hole transporting layer10.1016/j.apsusc.2010.11.142 ↗
19. Composition-dependent phase separation of P3HT:PCBM composites for high performance organic solar cells10.1016/j.orgel.2010.02.013 ↗
20. Temperature-dependent detectivity of near-infrared organic bulk heterojunction photodiodes10.1021/acsami.6b12162 ↗
21. Perovskite-based photodetectors: materials and devices10.1039/C6CS00896H ↗
22. Photocurrent transients in all-polymer solar cells: trapping and detrapping effects10.1063/1.3177337 ↗
23. Self-assembled TiO 2 nanorods as electron extraction layer for high-performance inverted polymer solar cells10.1021/cm5028833 ↗
24. Measurement of contact surface photo-voltage from forward bias C-V characteristics of P3HT:PCBM based BHJ solar cells10.1016/j.solmat.2017.07.010 ↗
25. Two-peak capacitance–voltage behavior in devices based on electron transport materials10.1016/j.orgel.2015.10.028 ↗
26. Hybrid ZnO-organic semiconductor interfaces in photodetectors: a comparison of two near-infrared donor-acceptor copolymers10.1016/j.orgel.2017.03.001 ↗
27. Defect characterization in organic semiconductors by forward bias capacitance–voltage (FB-CV) analysis10.1021/jp505500r ↗