Explaining the different efficiency behaviors of PHOLEDs with/without a hole injection barrier at the hole transport layer/emitter layer interface
Source abstract
Abstract
Abstract In this work we investigate the different efficiency behaviors of the devices with and without hole injection barrier, utilizing in our investigation the archetypical 4,4′-bis(carbazol-9-yl)biphenyl:Tris(2-phenylpyridine)iridium(III) host–guest PHOLEDs system. The results show that the recombination of electrons and holes on the host material generally leads to higher device efficiency in comparison to the case where recombination happens on the guest material. The results also show that in devices where a hole injection barrier between the HTL and the host material in the EML exists, the emission mechanism gradually changes from one based on host e–h recombination to one based on guest e–h recombination as the guest concentration is increased. When host e–h recombination is dominant, although it tends to produce higher device efficiency, host e–h recombination is generally also associated with significant efficiency roll-off; the latter arises from quenching of the host triplet excitons primarily due to host–host TTA. As the concentration of the guest molecules increases and the creation of host triplet excitons subsides (since most e–h recombination occurs on the guest) host–host TTA decreases, hence also the efficiency roll-off. In such case, quenching is mostly caused by polarons residing on guest sites. At optimum guest concentrations (∼8% Vol.), a balance between host e–h recombination and guest e–h recombination is reached, and thus also minimal TTA and Triplet-Polaron Quenching. On the other hand, in devices where hole injection barrier between the HTL and the host in the EML is insignificant, emission mechanism is always based on host e–h recombination irrespective of the guest concentration, and therefore have higher efficiency and the efficiency does not depend on guest concentration. The absence of the injection barrier in these devices results in a wider recombination zone, and hence a lower exciton concentration in general, which in turn reduces host–host TTA and thus lowers efficiency roll-off. In contrast, guest–guest TTA is not found to play a significant role in device efficiency behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Nearly 100% internal phosphorescence efficiency in an organic light-emitting device10.1063/1.1409582 ↗
2. Triplet exciton confinement and unconfinement by adjacent hole-transport layers10.1063/1.1751232 ↗
3. Influence of doping profile on the efficiency of blue phosphorescent organic light-emitting diodes10.1063/1.2936837 ↗
4. Suppression of efficiency roll off in blue phosphorescent organic light-emitting devices using double emission layers with additional carrier-transporting material10.1063/1.3147866 ↗
5. Transient analysis of organic electrophosphorescence. II. Transient analysis of triplet–triplet annihilation10.1103/PhysRevB.62.10967 ↗
6. Triplet-exciton quenching in organic phosphorescent light-emitting diodes with Ir-based emitters10.1103/PhysRevB.75.125328 ↗
7. Stable efficiency roll-off in phosphorescent organic light-emitting diodes
8. Efficiency control in iridium complex-based phosphorescent light-emitting diodes10.1155/2012/794674 ↗
9. Reduced efficiency roll-off in high-efficiency hybrid white organic light-emitting diodes10.1063/1.2836772 ↗
10. Confinement of triplet energy on phosphorescent molecules for highly-efficient organic blue-light-emitting devices10.1063/1.1594834 ↗
11. J.H. Kwon, W.S. Jeon, T.J. Park, 23.4: Invited Paper: Ideal Host-Dopant System for Highly Efficient Phosphorescent OLEDs, SID Symp. Dig. Tec. 40 (2009) 317–320.10.1889/1.3256774 ↗
12. Very high-efficiency green organic light-emitting devices based on electrophosphorescence10.1063/1.124258 ↗
13. Causes of efficiency roll-off in phosphorescent organic light emitting devices: triplet–triplet annihilation versus triplet-polaron quenching10.1063/1.3527085 ↗
14. Theoretical maximum quantum efficiency in red phosphorescent organic light-emitting diodes at a low doping concentration using a spirobenzofluorene type triplet host material10.1016/j.orgel.2010.02.003 ↗
15. Improving the efficiency of red phosphorescent organic light emitting diodes by exciton management10.1002/pssc.201200294 ↗
16. Highly simplified phosphorescent organic light emitting diode with >20% external quantum efficiency at >10,000cd/m210.1063/1.3532844 ↗
17. Delayed electroluminescence: a new tool for studies of OLED fundamental properties
18. Probing triplet–triplet annihilation zone and determining triplet exciton diffusion length by using delayed electroluminescence10.1063/1.3410678 ↗
19. 100% phosphorescence quantum efficiency of Ir (III) complexes in organic semiconductor films10.1063/1.1862777 ↗
20. The origin of the hole injection improvements at indium tin oxide/molybdenum trioxide/N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine interfaces
21. Vacuum level alignment in organic guest–host systems10.1063/1.1487917 ↗
22. White organic light-emitting device based on a compound fluorescent-phosphor-sensitized-fluorescent emission layer
23. Triplet-polaron quenching by charges on guest molecules in phosphorescent organic light emitting devices10.1063/1.4745194 ↗
24. Highly efficient phosphorescent emission from organic electroluminescent devices10.1038/25954 ↗
25. New charge-carrier blocking materials for high efficiency OLEDs10.1016/j.orgel.2003.08.003 ↗
26. Triplet host engineering for triplet exciton management in phosphorescent organic light-emitting diodes10.1063/1.2841058 ↗