journal article·2021-02Open access

Regulating crystallization to maintain balanced carrier mobility via ternary strategy in blade-coated flexible organic solar cells

Lin Zhang, Fang Yang, Xiangchuan Meng, Shuzhi Yang, Lili Ke, Conghua Zhou, Hongping Yan, Xiaotian Hu, Shaohua Zhang, Wei Ma, Yongbo Yuan

Abstract

Abstract Regulating the crystallization of donor and acceptor to maintain balanced carrier mobility is of great importance to fabricate efficient organic solar cells (OSCs). Herein, the balanced crystallinity between donor and acceptor was finely controlled in blade-coated OSCs. By adding high crystalline FOIC into PBDB-T:ITIC system, a balanced carrier mobility was achieved, resulting in the much improved fill factor. The optimized ternary device exhibits an increased current density, due to the enhanced light-harvesting efficiency with complementary absorption and the morphology change. Morphology characterization demonstrated that the ternary film exhibits a highly balanced crystallinity between the donor and acceptor on account of the formation of acceptor alloy. Moreover, the ternary film not only possesses a small domain size, but also exhibits a high domain purity as compared to both binary films. Encouragingly, a highest power conversion efficiency (PCE) of 10.68% was obtained for the blade-coated ternary OSCs. In addition, the blade-coated flexible large-area (105 mm2) OSC based on PBDB-T:ITIC:FOIC ternary system also exhibits a high PCE of 9.81%, showing great potential in the high-throughput fabrication of OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. A review of non-fullerene polymer solar cells: from device physics to morphology control10.1088/1361-6633/ab0530 ↗
2. Scalable fabrication of organic solar cells based on non-fullerene acceptors10.1088/2058-8585/ab5f57 ↗
3. Modeling thin film solar cells: from organic to perovskite10.1002/advs.201901397 ↗
4. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
5. Morphology changes upon scaling a high-efficiency, solution-processed solar cell10.1039/C6EE01623E ↗
6. A general approach for lab-to-manufacturing translation on flexible organic solar cells10.1002/adma.201903649 ↗
7. Efficient and mechanically robust ultraflexible organic solar cells based on mixed acceptors10.1016/j.joule.2019.10.007 ↗
8. Roll-to-roll micro-gravure printed large-area zinc oxide thin film as the electron transport layer for solution-processed polymer solar cells10.1016/j.orgel.2017.03.015 ↗
9. Large-area perovskite nanowire arrays fabricated by large-scale roll-to-roll micro-gravure printing and doctor blading10.1039/C5NR08277C ↗
10. Washable and flexible screen printed graphene electrode on textiles for wearable healthcare monitoring10.1088/1361-6463/ab5f4a ↗
11. Resistance change of stretchable composites based on inkjet-printed silver nanowires10.1088/1361-6463/ab524d ↗
12. The meniscus-guided deposition of semiconducting polymers10.1038/s41467-018-02833-9 ↗
13. Blade-cast nonfullerene organic solar cells in air with excellent morphology, efficiency, and stability10.1002/adma.201800343 ↗
14. Achieving balanced crystallinity of donor and acceptor by combining blade-coating and ternary strategies in organic solar cells10.1002/adma.201805041 ↗
15. A blade-coated highly efficient thick active layer for non-fullerene organic solar cells10.1039/C9TA09799F ↗
16. Blade-coated efficient and stable large-area organic solar cells with optimized additive10.1016/j.orgel.2020.105771 ↗
17. Screen printed graphene electrodes on textile for wearable electrocardiogram monitoring10.1007/s00339-019-3006-x ↗
18. High-performance semitransparent ternary organic solar cells10.1002/adfm.201800627 ↗
19. Morphology control enables efficient ternary organic solar cells10.1002/adma.201803045 ↗
20. Highly efficient ternary-blend polymer solar cells enabled by a nonfullerene acceptor and two polymer donors with a broad composition tolerance10.1002/adma.201704271 ↗
21. Morphology optimization in ternary organic solar cells, Chin
22. Poly(3-butylthiophene) nanowires inducing crystallization of poly(3-hexylthiophene) for enhanced photovoltaic performance10.1039/C4TC02470B ↗
23. Poly(3-butylthiophene) inducing crystallization of small molecule donor for enhanced photovoltaic performance10.1021/acs.jpcc.5b04850 ↗
24. pi-pi stacking induced high current density and improved efficiency in ternary organic solar cells10.1039/C8NR01421C ↗
25. Significantly enhanced molecular stacking in ternary bulk heterojunctions enabled by an appropriate side group on donor polymer10.1002/advs.201903455 ↗
26. Vanishing and revival of resonance Raman scattering10.1103/PhysRevLett.123.223202 ↗
27. Attosecond all-optical control and visualization of quantum interference between degenerate magnetic states by circularly polarized pulses10.1364/OL.386879 ↗
28. Synergistic effect of polymer and small molecules for high-performance ternary organic solar cells10.1002/adma.201404902 ↗
29. Conjugated polymer-small molecule alloy leads to high efficient ternary organic solar cells10.1021/jacs.5b03449 ↗
30. Highly stretchable polymer/silver nanowires composite sensor for human health monitoring10.1007/s12274-020-2730-z ↗
31. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
32. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
33. Y.P. Xie, Y.H. Cai, L. Zhu, R.X. Xia, L.L. Ye, X. Feng, H.L. Yip, F. Liu, G.H. Lu, S.T. Tan, Y.M. Sun, Fibril network strategy enables high-performance semitransparent organic solar cells, Adv. Funct. Mater., DOI: 10.1002/adfm.202002181.10.1002/adfm.202002181 ↗
34. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
35. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
36. Fused tris(thienothiophene)-based electron acceptor with strong near-infrared absorption for high-performance as-cast solar cells10.1002/adma.201705969 ↗
37. Effect of dihydronaphthyl-based C60 bisadduct as third component materials on the photovoltaic performance and charge carrier recombination of binary PBDB-T : ITIC polymer solar cells10.1039/C8NR01969J ↗
38. Charge-carrier mobility requirements for bulk heterojunction solar cells with high fill factor and external quantum efficiency > 90%10.1002/aenm.201500577 ↗
39. An asymmetric small molecule based on thieno 2,3-f benzofuran for efficient organic solar cells10.1016/j.orgel.2016.05.010 ↗
40. A wide-bandgap donor polymer for highly efficient non-fullerene organic solar cells with a small voltage loss10.1021/jacs.7b01606 ↗
41. Synergistic effects of the processing solvent and additive on the production of efficient all-polymer solar cells10.1039/C9NR10495J ↗
42. A universal approach to improve electron mobility without significant enlarging phase separation in IDT-based non-fullerene acceptor organic solar cells10.1016/j.nanoen.2017.10.014 ↗
43. Intensity dependence of current-voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
44. Two-step processed efficient perovskite solar cells via improving perovskite/PTAA interface using solvent engineering in PbI2 precursor*10.1088/1674-1056/ab7744 ↗
45. Fine regulation of crystallisation tendency to optimize the BHJ nanostructure and performance of polymer solar cells10.1039/D0NR00698J ↗
46. Soft x-ray scattering facility at the Advanced Light Source with real-time data processing and analysis10.1063/1.3701831 ↗
47. Morphology analysis of organic solar cells with synchrotron radiation based resonant soft X-ray scattering
48. Polarized X-ray scattering reveals non-crystalline orientational ordering in organic films10.1038/nmat3310 ↗
49. A SAXS/WAXS/GISAXS beamline with multilayer monochromator
50. Hidden structure ordering along backbone of fused-ring electron acceptors enhanced by ternary bulk heterojunction10.1002/adma.201802888 ↗
51. Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors10.1107/S0021889809040126 ↗
52. Efficient quaternary organic solar cells with parallel-alloy morphology10.1002/adfm.201806804 ↗
53. Achieving balanced crystallization kinetics of donor and acceptor by sequential-blade coated double bulk heterojunction organic solar cells10.1002/aenm.202000826 ↗
54. Balancing the pre-aggregation and crystallization kinetics enables high efficiency slot-die coated organic solar cells with reduced non-radiative recombination losses10.1039/D0EE00774A ↗
55. Templated growth of oriented layered hybrid perovskites on 3D-like perovskites10.1038/s41467-019-13856-1 ↗
56. Recent advances in controlling the crystallization of two-dimensional perovskites for optoelectronic device10.1007/s11467-019-0901-8 ↗
57. Silicon phthalocyanine passivation for fullerene-free perovskite solar cells with efficient electron extraction
58. Accelerated hole-extraction in carbon-electrode based planar perovskite solar cells by moisture-assisted post-annealing10.1063/1.5087098 ↗
59. All-inorganic perovskite CsPbBr3 microstructures growth via chemical vapor deposition for high-performance photodetectors10.1039/C9NR06682A ↗
60. Comparison of the morphology development of polymer-fullerene and polymer-polymer solar cells during solution-shearing blade coating10.1002/aenm.201601225 ↗