journal article·2019-12

Improved charge transfer, mobility and morphology for high performance panchromatic organic photodetectors by adding PC71BM in P3HT:IEICO-4F

Yu Han, Xiaohua Zhang, Fan Zhang, Dan Zhao, Junsheng Yu

Publisher page

Abstract

Abstract High performance of panchromatic organic photodetectors (OPDs) with a wide spectral response ranged from 300 to 1000 nm were realized through adding [6,6]-phenyl-C71-butyric acid methylester (PC71BM) fullerene as an electron acceptor into the polymer donor of poly (3-hexylthiophene) (P3HT) and the small molecular non-fullerene acceptor of 2, 2′-((2Z,2′Z)-(((4, 4, 9, 9-tetrakis(4-hexylphenyl)-4, 9-dihydro-sindaceno[1, 2-b:5, 6-b′]dithiophene-2, 7-diyl)bis(4-((2-ethylhexyl)oxy)thiophene-5, 2-diyl))bis-(methanylylidene))bis(5, 6-difluoro-3-oxo-2, 3-dihydro-1H-indene-2, 1-diylidene))dimalononitrile (IEICO-4F) host system. The fabricated OPD exhibited a high detectivity (D*) of 1.35 × 1012 Jones at 805 nm by adding 10 wt% PC71BM, which is 1.5 folds higher than it from the control system. The improved performance was mainly attributed to the increased light absorption in the short wavelength range and cascade energy level alignment, which is responsible for the efficient light harvesting and exciton utilization. Furthermore, the active layer morphology was optimized by adjusting the ratio of PC71BM acceptor, which efficiently enhances charge transport and mobility of the device as well as suppress bimolecular recombination. This work indicates that adding fullerene into non-fullerene system plays a positive effect on the device performance of panchromatic OPDs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. All-organic optoelectronic sensor for pulse oximetry10.1038/ncomms6745 ↗
2. Organic photodiodes: the future of full color detection and Image sensing10.1002/adma.201505405 ↗
3. Fully digitally printed image sensor based on organic photodiodes10.1002/adom.201701108 ↗
4. Integration of an organic photodetector on to a plastic optical fiber by means of spray coating technique10.1002/adma.201301285 ↗
5. Highly sensitive polymer photodetectors with a broad spectral response range from UV light to the near infrared region10.1039/C5TC01383F ↗
6. Highly narrowband photomultiplication type organic photodetectors10.1021/acs.nanolett.6b05418 ↗
7. High-detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm10.1126/science.1176706 ↗
8. A stretchable nanowire UV-Vis-NIR photodetector with high performance10.1002/adma.201404945 ↗
9. Panchromatic small molecules for UV-Vis-NIR photodetectors with high detectivity10.1039/c3tc32271h ↗
10. High-detectivity panchromatic photodetectors for the near infrared region based on a dimeric porphyrin small molecule10.1039/C8TC00270C ↗
11. Organic non-fullerene acceptors for organic photovoltaics10.1039/c0ee00668h ↗
12. Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells10.1039/C3TA14236A ↗
13. High-efficiency nonfullerene organic solar cells with a parallel tandem configuration10.1002/adma.201702547 ↗
14. Fused tris(thienothiophene)-based electron acceptor with strong near-infrared absorption for high-performance as-cast solar cells10.1002/adma.201705969 ↗
15. Rigid, conjugated macrocycles for high performance organic photodetectors10.1021/jacs.6b10276 ↗
16. Non-fullerene based printed organic photodiodes with high responsivity and MHz detection speed10.1021/acsami.8b16018 ↗
17. Highly sensitive organic photodetectors with tunable spectral response under Bi-directional bias10.1002/adom.201600387 ↗
18. Visible to near-infrared photodetection based on ternary organic heterojunctions10.1002/adfm.201808948 ↗
19. Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air10.1038/s41560-018-0192-2 ↗
20. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
21. Ternary-blend polymer solar cells combining fullerene and nonfullerene acceptors to synergistically boost the photovoltaic performance10.1002/adma.201603588 ↗
22. Employing pentacene to balance the charge transport in inverted organic solar cells10.1021/acs.jpcc.8b05333 ↗
23. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
24. Effect of two-step annealing on the performance of ternary polymer solar cells based on P3HT:PC71BM:SQ10.1016/j.solmat.2014.05.026 ↗
25. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
26. Highly sensitive panchromatic ternary polymer photodetectors enabled by Förster resonance energy transfer and post solvent treatment10.1088/1361-6463/aaab34 ↗
27. Three-phase morphology evolution in sequentially solution-processed polymer photodetector: toward low dark current and high photodetectivity10.1021/acsami.7b15730 ↗
28. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
29. Organic light detectors: photodiodes and phototransistors10.1002/adma.201204979 ↗
30. Optimization of broad-response and high-detectivity polymer photodetectors by bandgap engineering of weak donor-strong acceptor polymers10.1021/acs.macromol.5b00859 ↗
31. Efficient visible-near-infrared hybrid Perovskite:PbS quantum dot photodetectors fabricated using an antisolvent additive solution process10.1002/adom.201800979 ↗
32. Enhanced charge transfer between fullerene and non-fullerene acceptors enables highly efficient ternary organic solar cells10.1021/acsami.8b16131 ↗
33. Simultaneous improvement in short circuit current, open circuit voltage, and fill factor of polymer solar cells through ternary strategy10.1021/acsami.5b00308 ↗
34. Highly efficient inverted ternary organic solar cells with polymer fullerene-free acceptor as a third component material10.1016/j.jpowsour.2018.12.073 ↗
35. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
36. Ternary non-fullerene polymer solar cells with 13.51% efficiency and a record-high fill factor of 78.13%10.1039/C8EE01564C ↗
37. Realization of high detectivity organic ultraviolet photodetectors by modifying polymer active layer10.1016/j.orgel.2014.08.045 ↗
38. A nanocomposite ultraviolet photodetector based on interfacial trap-controlled charge injection10.1038/nnano.2012.187 ↗
39. Dual-accepting-unit design of donor material for all-small-molecule organic solar cells with efficiency approaching 11%10.1021/acs.chemmater.8b03980 ↗
40. Understanding low bandgap polymer PTB7 and optimizing polymer solar cells based on it10.1002/adma.201400384 ↗
41. Conjugated-polymer blends for organic photovoltaics: rational control of vertical stratification for high performance10.1002/adma.201601674 ↗