Solution-processed SnO2 nanoparticle interfacial layers for efficient electron transport in ZnO-based polymer solar cells
Source abstract
Abstract
Abstract Polymer solar cells (PSCs) suffer energy loss due to a number of reasons including high thermalisation, large exciton binding energy and electron-hole recombination within the active layer of the device. Although much effort has gone into addressing the above, interface recombination between a FTO cathode and ZnO electron transport layer (ETL) has remained relatively unnoticed. In this paper, an efficient inverted PSC is demonstrated by introducing a solution-processed SnO2 film between the ZnO ETL and FTO cathode. The use of the SnO2 layer, improves significantly all the device performance parameters of PSCs based on P3HT:PC61BM and PCDTBT:PC71BM system, achieving higher power conversion efficiency (PCE) up to 4.25% and 7.16%, compared to that without the SnO2 film (PCE 3.10% and 5.52%). The improved performance is attributed to the enhanced optical transmission, the reduced energy barrier and suppression of carrier recombination at the interface between the ZnO layer and cathode. Furthermore, the SnO2 film is shown to facilitate electron injection as well as effective hole blocking from the active layer. This study provides an efficient approach to optimize the device performance of PSCs by interfacial modification at bottom conductive electrode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Effect of thermal annealing treatment with titanium chelate on buffer layer in inverted polymer solar cells10.1016/j.apsusc.2016.08.007 ↗
2. Bromine-terminated additives for phase-separated morphology control of PTB7:PC71BM-based polymer solar cells10.1021/acssuschemeng.7b03074 ↗
3. Moderately reduced graphene oxide as hole transport layer in polymer solar cells via thermal assisted spray process10.1016/j.apsusc.2014.01.061 ↗
4. An aqueous solution-processed CuOx film as an anode buffer layer for efficient and stable organic solar cells10.1039/C6TA00909C ↗
5. Low-temperature solution-processed Mg:SnO2 nanoparticles as an effective cathode interfacial layer for inverted polymer solar cell10.1021/acssuschemeng.8b00491 ↗
6. Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells10.1039/C4EE03802A ↗
7. Achieving 6.7% efficiency in P3HT/Indene-C70 bisadduct solar cells through the control of vertical volume fraction distribution and optimized regio-isomer ratios10.1002/aelm.201600362 ↗
8. Solution-processed 8-hydroquinolatolithium as effective cathode interlayer for high-performance polymer solar cells10.1021/acsami.6b00327 ↗
9. Efficient solution-processed small-molecule solar cells with inverted structure10.1002/adma.201300295 ↗
10. Metal oxide nanoparticles as an electron-transport layer in high-performance and stable inverted polymer solar cells10.1002/adma.201201958 ↗
11. High-efficiency inverted dithienogermole-thienopyrrolodione- based polymer solar cells10.1038/nphoton.2011.317 ↗
12. Solution processed reduced graphene oxide/metal oxide hybrid electron transport layers for highly efficient polymer solar cells10.1039/c3ta11822c ↗
13. 8.9% single-stack inverted polymer solar cells with electron-rich polymer nanolayer-modified inorganic electron-collecting buffer layers10.1002/aenm.201301692 ↗
14. Enhanced performance of polymer solar cell with ZnO nanoparticle electron transporting layer passivated by in situ cross-linked three-dimensional polymer network10.1088/0957-4484/24/48/484012 ↗
15. Hydrophilic poly(triphenylamines) with phosphonate groups on the side chains: synthesis and photovoltaic applications10.1039/c1jm14970a ↗
16. Highly efficient, inverted polymer solar cells with indium tin oxide modified with solution-processed zwitterions as the transparent cathode10.1021/am201844q ↗
17. Hybrid graphene-metal oxide solution processed electron transport layers for large area high-performance organic photovoltaics10.1002/adma.201304780 ↗
18. Barium hydroxide as an interlayer between zinc oxide and a luminescent conjugated polymer for light-emitting diodes10.1002/adfm.201200850 ↗
19. 2,7-Carbazole-1,4- phenylene copolymers with polar side chains for cathode modifications in polymer light-emitting diodes10.1021/ma200191p ↗
20. High-mobility transparent thin-film transistors with an Sb-doped SnO2 nanocrystal channel fabricated at room temperature10.1088/0957-4484/20/33/335204 ↗
21. Tin oxide transparent thin-film transistors10.1088/0022-3727/37/20/006 ↗
22. SnO2-based dye-sensitized hybrid solar cells exhibiting near unity absorbed photon-to-electron conversion efficiency10.1021/nl903809r ↗
23. Nanoscale dispersions of gelled SnO2: material properties and device applications10.1021/cm402462m ↗
24. Synthesis of monodispersed SnO2 nanocrystals and their remarkably high sensitivity to volatile organic compounds10.1021/cm100228d ↗
25. Nanoscale SnO2 hollow spheres and their application as a gas-sensing material10.1021/cm1011235 ↗
26. TiO2/SnOxCly double layer for highly efficient planar perovskite solar cells10.1016/j.orgel.2017.07.050 ↗
27. ZnO/SnO2 double electron transport layer guides improved open circuit voltage for highly efficient CH3NH3PbI3-based planar perovskite solar cells10.1021/acsaem.8b00293 ↗
28. Room-temperature solution processed SnOx as an electron extraction layer for inverted organic solar cells with superior thermal stability10.1039/c2jm33445c ↗
29. Structural and electronic properties of SnO210.1016/j.jallcom.2013.05.057 ↗
30. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
31. Bulk heterojunction solar cells with large open-circuit voltage: electron transfer with small donor-acceptor energy offset10.1002/adma.201003768 ↗
32. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
33. Exciton diffusion and charge transfer dynamics in nano phase-separated P3HT/PCBM blend films10.1039/c0nr01002b ↗
34. 10.8% efficiency polymer solar cells based on PTB7-Th and PC71BM via binary solvent additives treatment10.1002/adfm.201602181 ↗
35. Diketopyrrolopyrrole-based oligomer modified TiO2 nanorods for air-stable and all solution processed poly(3-hexylthiophene):TiO2 bulk heterojunction inverted solar cell10.1039/c2jm30334e ↗
36. A ZnO/N-doped carbon nanotube nanocomposite charge transport layer for high performance optoelectronics10.1039/c2jm30710c ↗
37. Efficiency and air-stability improvement of flexible inverted polymer solar cells using ZnO/poly(ethylene glycol) hybrids as cathode buffer layers10.1021/am4013038 ↗
38. Hole extraction enhancement for efficient polymer solar cells with boronic acid functionalized carbon nanotubes doped hole transport layers10.1021/acssuschemeng.7b04791 ↗
39. Cooperative plasmonic effect of Ag and Au nanoparticles on enhancing performance of polymer solar cells10.1021/nl3034398 ↗
40. Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends10.1039/C2EE23235A ↗
41. Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors10.1063/1.1521244 ↗
42. Barium: an efficient cathode layer for bulk-heterojunction solar cells10.1038/srep01965 ↗
43. Origin of the dark- current ideality factor in polymer:fullerene bulk heterojunction solar cells10.1063/1.3651752 ↗
44. An organic surface modifier to produce a high work function transparent electrode for high performance polymer solar cells10.1002/adma.201404172 ↗
45. Origin of the reduced fill factor and photocurrent in MDMO-PPV: PCNEPV all- polymer solar cells10.1002/adfm.200601110 ↗