Enhanced performance of P3HT-based non-fullerene polymer solar cells by optimizing film morphology using non-halogenated solvent
Source abstract
Abstract
Abstract Increasing research interests have been paid to developing efficient polymer solar cells by using integrating non-fullerene acceptors with poly (3-hexylthiophene) (P3HT), owing to the low-cost, promising performance and excellent stability. Here we systematically studied how processing solvents influence the overall performances of polymer solar cells using P3HT as the electron donor. It is very interesting to note that the devices processed with the non-halogenated solvent, 2-methylanisole in presence of 1-methylnaphthalene as solvent additive, exhibit reduced bimolecular and trap-assisted monomolecular recombination, facile charge extraction and enhanced charge carrier mobilities. Careful morphological investigation reveals that the optimizing crystallites, phase purity as well as nanofibrous structure is effective to the enhancement of charge generation and transport. It is also worth noting that these P3HT:O-IDTBR based devices processed with these non-halogenated solvents exhibitean impressive power conversion efficiency of 7.1% with a high fill factor of 75.09% on a device area of 0.05 cm2, and the efficiency remained 6.89% even in a device with large active layer area of 1 cm2, while also showing promising thermal stability. This study provides a new scope of processing P3HT based polymer solar cells by using non-halogenated solvents, which is compatible and has great promise for future applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Nanowire Synthesis and Applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Near-infrared electron acceptors with fluorinated regioisomeric backbone for highly efficient polymer solar cells10.1002/adma.201803769 ↗
2. Eco-compatible solvent-processed organic photovoltaic cells with over 16% efficiency10.1002/adma.201903441 ↗
3. A low cost and high performance polymer donor material for polymer solar cells10.1038/s41467-018-03207-x ↗
4. Conjugated polymer donor with alkylthio-thiophene π-bridge for efficient polymer solar cells10.1016/j.orgel.2018.09.047 ↗
5. Energy-effectively printed all-polymer solar cells exceeding 8.61% efficiency10.1016/j.nanoen.2018.02.035 ↗
6. Morphology optimization via molecular weight tuning of donor polymer enables all-polymer solar cells with simultaneously improved performance and stability10.1016/j.nanoen.2019.103931 ↗
7. Improving the efficiency and stability of non-fullerene polymer solar cells by using N2200 as the additive10.1016/j.nanoen.2019.01.082 ↗
8. Ternary organic solar cells with efficiency >16.5% based on two compatible nonfullerene acceptors10.1002/adma.201905645 ↗
9. A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency10.1039/C9EE01890E ↗
10. Enhancing the performance of a fused-ring electron acceptor by unidirectional extension10.1021/jacs.9b08988 ↗
11. Enhanced performance of inverted non-fullerene organic solar cells through modifying zinc oxide surface with self-assembled monolayers10.1016/j.orgel.2018.09.016 ↗
12. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
13. Analyzing the efficiency, stability and cost potential for fullerene-free organic photovoltaics in one figure of merit10.1039/C8EE00151K ↗
14. Enhancing the JSC of P3HT-based OSCs via a thiophene-fused aromatic heterocycle as a “π-bridge” for A-π-D-π-A-type acceptors10.1021/acsami.9b08007 ↗
15. Enhanced JSC of P3HT-based non-fullerene polymer solar cells by modulating aggregation effect of P3HT in solution state10.1016/j.orgel.2019.01.047 ↗
16. Simultaneous enhancement of three parameters of P3HT-based organic solar cells with one oxygen atom
17. Quinoxaline-containing nonfullerene small-molecule acceptors with a linear A2-A1-D-A1-A2 skeleton for poly(3-hexylthiophene)-based organic solar cells10.1021/acsami.8b00216 ↗
18. Achievement of high VOC of 1.02 V for P3HT-based organic solar cell using a benzotriazole-containing non-fullerene acceptor10.1002/aenm.201602269 ↗
19. P3HT-based photovoltaic cells with a high VOC of 1.22 V by using a benzotriazole-containing nonfullerene acceptor end-capped with thiazolidine-2,4-dione10.1021/acsmacrolett.7b00097 ↗
20. Effects of oxygen atoms introduced at different positions of non-fullerene acceptors in the performance of organic solar cells with poly(3-hexylthiophene)10.1021/acsami.9b16662 ↗
21. Side chain engineering of quinoxaline-based small molecular non-fullerene acceptors for high-performance poly(3-hexylthiophene)-based organic solar cells10.1007/s11426-019-9618-7 ↗
22. A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage10.1039/C5EE03481G ↗
23. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
24. P3HT-based polymer solar cells with 8.25% efficiency enabled by a matched molecular acceptor and smart green-solvent processing technology10.1002/adma.201906045 ↗
25. Separating crystallization process of P3HT and O-IDTBR to construct highly crystalline interpenetrating network with optimized vertical phase separation10.1002/adfm.201807591 ↗
26. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
27. Burn-in free nonfullerene-based organic solar cells10.1002/aenm.201700770 ↗
28. Achieving efficient thick film all-polymer solar cells using a green solvent additive10.1007/s10118-020-2356-3 ↗
29. A generic green solvent concept boosting the power conversion efficiency of all-polymer solar cells to 11%10.1039/C8EE02863J ↗
30. Influence of aggregation on the performance of all-polymer solar cells containing low-bandgap naphthalenediimide copolymers10.1002/aenm.201100601 ↗
31. High-performance organic field-effect transistors with directionally aligned conjugated polymer film deposited from pre-aggregated solution10.1021/acs.chemmater.5b03775 ↗
32. Novel electroluminescent conjugated polyelectrolytes based on polyfluorene10.1021/cm034650o ↗
33. Ultrafast exciton dissociation followed by nongeminate charge recombination in PCDTBT:PCBM photovoltaic blends10.1021/ja201837e ↗
34. Bimolecular recombination in polymer/fullerene bulk heterojunction solar cells
35. Comparison of the operation of polymer/fullerene, polymer/polymer, and polymer/nanocrystal solar cells: a transient photocurrent and photovoltage study10.1002/adfm.201002154 ↗
36. Toward highly efficient large-area ITO-free organic solar cells with a conductance-gradient transparent electrode10.1002/adma.201502827 ↗
37. Optimizing microstructure morphology and reducing electronic losses in 1 cm2 polymer solar cells to achieve efficiency over 15%10.1021/acsenergylett.9b01447 ↗
38. The future of organic photovoltaics10.1039/C4CS00227J ↗
39. Optimization of processing solvent and film morphology to achieve efficient non-fullerene polymer solar cells processed in air10.1039/C9TC05358A ↗
40. Surpassing the 10% efficiency milestone for 1-cm2 all-polymer solar cells10.1038/s41467-019-12132-6 ↗
41. Anti-reflective coatings: a critical, in-depth review10.1039/c1ee01297e ↗
42. Morphology and phase segregation of spin-casted films of Polyfluorene/PCBM blends10.1021/ma070712a ↗
43. Predicting morphologies of solution processed polymer:fullerene blends10.1021/ja405493j ↗
44. Polymer semiconductor crystals10.1016/S1369-7021(10)70080-8 ↗
45. An unfused-core-based nonfullerene acceptor enables high-efficiency organic solar cells with excellent morphological stability at high temperatures
46. A simple phenyl group introduced at the tail of alkyl side chains of small molecular acceptors: new strategy to balance the crystallinity of acceptors and miscibility of bulk heterojunction enabling highly efficient organic solar cells