journal article·2017-07

Synthesis and characterization of a wide bandgap polymer based on a weak donor-weak acceptor structure for dual applications in organic solar cells and organic photodetectors

Eun Young Choi, Seung Hun Eom, Chang Eun Song, So Youn Nam, Jaemin Lee, Han Young Woo, In Hwan Jung, Sung Cheol Yoon, Changjin Lee

Publisher page

Abstract

Abstract We synthesized a novel wide bandgap polymer, PDTFBT, forming a weak donor (WD)-weak acceptor (WA) structure for use in organic photodetectors (OPDs) and organic solar cells (OSCs). The fluorination in the D unit and the alkoxy substitution in the A unit induced WD and WA properties, respectively. The WD-WA structure of PDTFBT effectively broadened the bandgap compared to typical D-A structures, and the S-F and S-O dipole-dipole interactions induces a highly planar backbone structure with excellent π-π stacking in the vertical direction. In OPDs, conformationally less disordered PDTFBT polymer retained the constant responsivity and significantly improved the detectivity of PDTFBT:PC71BM devices even with a thick active layer of 470 nm, contrary to the variation in the responsivity of P3HT:PC61BM devices depending on the thickness. In OSCs, the deep HOMO energy level (−5.57 eV) of PDTFBT led to high Voc of 0.92 V in PDTFBT:PC71BM devices, which was 0.3 eV higher than that of P3HT:PC61BM devices (0.62 V), resulting in 1.8-fold enhanced power conversion efficiency. We demonstrated that the WD-WA structure with S-F and S-O interactions is highly promising strategy to make wide bandgap polymers for organic photodetectors and for the bottom cell of tandem architecture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
2. Ultrathin and lightweight organic solar cells with high flexibility10.1038/ncomms1772 ↗
3. Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems10.1039/C5TA07357J ↗
4. Roll-to-Roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
5. X-ray detector-on-plastic with high sensitivity using low cost, solution-processed organic photodiodes10.1109/TED.2015.2432572 ↗
6. X-ray imager using solution processed organic transistor arrays and bulk heterojunction photodiodes on thin, flexible plastic substrate10.1016/j.orgel.2013.06.020 ↗
7. X-ray imaging with scintillator-sensitized hybrid organic photodetectors10.1038/nphoton.2015.216 ↗
8. High-detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm10.1126/science.1176706 ↗
9. Retrieved from http://www.opvius.com/.
10. Retrieved from https://lorix-project.eu/.
11. Retrieved from http://dicomo-project.eu/.
12. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
13. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
14. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
15. Efficient inverted polymer solar cells employing favourable molecular orientation10.1038/nphoton.2015.84 ↗
16. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
17. High-performance organic solar cells based on a small molecule with alkylthio-thienyl-conjugated side chains without extra treatments, adv
18. n-Type water/alcohol-soluble naphthalene diimide-based conjugated polymers for high-performance polymer solar cells10.1021/jacs.5b12664 ↗
19. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
20. Over 11% efficiency in tandem polymer solar cells featured by a low-band-gap polymer with fine-tuned properties10.1002/adma.201600373 ↗
21. Polymer Homo-Tandem solar cells with best efficiency of 11.3%10.1002/adma.201404220 ↗
22. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
23. A Series of New Medium-Bandgap Conjugated Polymers Based on Naphtho[1,2-c:5,6-c]bis(2-octyl-[1,2,3]triazole) for High-Performance Polymer Solar Cells10.1002/adma.201301547 ↗
24. Dramatic performance enhancement for large bandgap thick-film polymer solar cells introduced by a difluorinated donor unit10.1016/j.nanoen.2015.05.016 ↗
25. Poly(benzodithiophene) homopolymer for high-performance polymer solar cells with open-circuit voltage of near 1 V: a superior candidate to substitute for poly(3-hexylthiophene) as wide bandgap polymer10.1021/acs.chemmater.5b00481 ↗
26. Wide band-gap 3,4-difluorothiophene-based polymer with 7% solar cell efficiency: an alternative to P3HT10.1021/acs.chemmater.5b01520 ↗
27. High open circuit voltage solution-processed tandem organic photovoltaic cells employing a bottom cell using a new medium band gap semiconducting polymer10.1021/cm401527b ↗
28. High-Crystalline medium-band-gap polymers consisting of benzodithiophene and benzotriazole derivatives for organic photovoltaic cells10.1021/am401926h ↗
29. Effect of π-conjugated bridges of TPD-based medium bandgap conjugated copolymers for efficient tandem organic photovoltaic cells10.1039/C4EE02318H ↗
30. Stability of x-ray detectors based on organic photovoltaic devices10.1109/JSTQE.2010.2048557 ↗
31. The dependence of device dark current on the active-layer morphology of solution-processed organic photodetectors10.1002/adfm.201000967 ↗
32. Synthetic principles for bandgap control in linear π-conjugated systems10.1021/cr950257t ↗
33. Synthesis of fluorinated polythienothiophene-co-benzodithiophenes and effect of fluorination on the photovoltaic properties10.1021/ja108601g ↗
34. Novel wide band-gap polymer utilizing fused hetero-aromatic unit for efficient polymer solar cells and field-effect transistors10.1016/j.polymer.2014.10.067 ↗
35. Tuning the fused aromatic rings to enhance photovoltaic performance in wide band-gap polymer solar cells10.1016/j.polymer.2016.10.011 ↗
36. Incremental optimization in donor polymers for bulk heterojunction organic solar cells exhibiting high performance10.1002/polb.23102 ↗
37. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
38. Mediating solar cell performance by controlling the internal dipole change in organic photovoltaic polymers10.1021/ma3011119 ↗
39. Development and structure/property relationship of new electron accepting polymers based on thieno[2′,3′:4,5]pyrido[2,3-g]thieno[3,2-c]quinoline-4,10-dione for all-polymer solar cells10.1021/acs.chemmater.5b01928 ↗
40. Examining the effect of the dipole moment on charge separation in donor–acceptor polymers for organic photovoltaic applications10.1021/ja208642b ↗
41. Controlling conformations of conjugated polymers and small molecules: the role of nonbonding interactions10.1021/ja403667s ↗
42. Influences of the non-covalent interaction strength on reaching high solid-state order and device performance of a low bandgap polymer with axisymmetrical structural units10.1002/adma.201300098 ↗
43. Interplay of conformational states and nonbonded interactions in substituted bithiophenes10.1021/jp036614i ↗
44. Interplay of intramolecular noncovalent coulomb interactions for semicrystalline photovoltaic polymers10.1021/acs.chemmater.5b02251 ↗
45. Fluorinated polymer yields high organic solar cell performance for a wide range of morphologies10.1002/adfm.201300093 ↗
46. Tuning fluorinated benzotriazole polymers through alkylthio substitution and selenophene incorporation for bulk heterojunction solar cells10.1021/ma5001095 ↗
47. Fluorine substituents reduce charge recombination and drive structure and morphology development in polymer solar cells10.1021/ja309289u ↗
48. Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends10.1039/C2EE23235A ↗
49. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency10.1002/anie.201005451 ↗
50. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in Polymer−Fullerene solar cells10.1021/ja1112595 ↗
51. Mobility-controlled performance of thick solar cells based on fluorinated copolymers10.1021/ja5067724 ↗
52. Semicrystalline d–a copolymers with different chain curvature for applications in polymer optoelectronic devices10.1021/ma402588m ↗
53. Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device10.1039/C4EE01529K ↗
54. Efficient conventional- and inverted-type photovoltaic cells using a planar alternating polythiophene copolymer10.1002/chem.201102883 ↗
55. Noncovalent intermolecular interactions in organic electronic materials: implications for the molecular packing vs electronic properties of acenes10.1021/acs.chemmater.5b03266 ↗
56. Geometrically controlled organic small molecule acceptors for efficient fullerene-free organic photovoltaic devices10.1039/C6TA04344E ↗
57. Synthesis and characterization of an anthracene-based low band gap polymer for photovoltaic devices10.1166/jnn.2014.8788 ↗
58. Design, synthesis, and control of conducting polymer architectures: structurally homogeneous poly(3-alkylthiophenes)10.1021/jo00056a024 ↗
59. Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
60. Development of new photovoltaic conjugated polymers based on di(1-benzothieno)[3,2-b:2′,3′-d]pyrrole: benzene ring extension strategy for improving open-circuit voltage10.1021/acs.macromol.5b01129 ↗
61. A di(1-benzothieno) [3,2-b:2′,3′-d]pyrrole and isoindigo-based electron donating conjugated polymer for efficient organic photovoltaics10.1039/C5TC04220H ↗
62. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
63. Modeling the imaging performance of prototype organic x-ray imagers10.1118/1.2805479 ↗
64. Charge transport and photocurrent generation in poly(3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
65. Effect of temperature and illumination on the electrical characteristics of polymer–fullerene bulk-heterojunction solar cells10.1002/adfm.200304399 ↗
66. Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors10.1063/1.1521244 ↗
67. Relating the morphology of poly(p-phenylene vinylene)/methanofullerene blends to solar-cell performance10.1002/adfm.200305049 ↗