journal article·2014-01

High rectifier output voltages with printed organic charge pump circuit

Petri Heljo, Kaisa E. Lilja, Himadri S. Majumdar, Donald Lupo

Organic Electronics· Volume 15· Issue 1
Publisher page

Abstract

It is known that in many wireless organic electronic applications the required supply voltage is higher than the accessible signal amplitude. Therefore, voltage multiplier circuits are needed in many cases. We report a gravure printed organic charge pump circuit operating at 13.56 MHz suitable for rectified voltage amplification in printed electronic devices. The circuit, consisting of four diodes and four capacitors, has been monolithically printed using only high volume production compatible manufacturing methods. With 10 V AC input the output of the circuit at 13.56 MHz is 8.4 V and 11.8 V using 1 MΩ and 10 MΩ output loads, respectively. At 13.56 MHz the output voltage of the charge pump is three times higher than the output of a half-wave rectifier. The results demonstrate the possibility to print efficient high frequency (HF) charge pump circuits to meet the supply voltage requirements of the printed electronic applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Energy Harvesting in Wireless Networks · Wireless Power Transfer Systems · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Printed organic transistors for ultra-low-cost RFID applications10.1109/TCAPT.2005.859672 ↗
2. Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56MHz10.1088/0957-4484/23/34/344006 ↗
3. All-printed and roll-to-roll-printable 13.56-MHz-operated 1-bit RF tag on plastic foils10.1109/TED.2009.2039541 ↗
4. High-frequency polymer diode rectifiers for flexible wireless power-transmission sheets10.1016/j.orgel.2011.07.006 ↗
5. 50MHz rectifier based on an organic diode10.1038/nmat1434 ↗
6. A 13.56-MHz RFID system based on organic transponders10.1109/JSSC.2006.886556 ↗
7. Dobkin · 2007
8. An integrated double half-wave organic Schottky diode rectifier on foil operating at 13.56MHz10.1063/1.2978348 ↗
9. Realization of polymer charge pump circuits using polymer semiconductors10.1016/j.orgel.2010.11.006 ↗
10. P. Heljo, K.E. Lilja, S. Tuukkanen, D. Lupo, Charge pump circuit using printed organic diodes and capacitors, in: Proc. LOPE-C Frankfurt, 2011, pp. 53–55.
11. S. Steudel, K. Myny, P. Vicca, D. Cheyns, J. Genoe, P. Heremans, Ultra-high frequency rectification using organic diodes, in: Proc Electron Devices Meeting San Francisco, 2008.10.1109/IEDM.2008.4796622 ↗
12. Pozar · 2009
13. Printed half-wave and full-wave rectifier circuits based on organic diodes10.1109/TED.2012.2233741 ↗
14. Enhanced performance of printed organic diodes using a thin interfacial barrier layer10.1021/am1009869 ↗
15. Effect of dielectric barrier on rectification, injection and transport properties of printed organic diodes10.1088/0022-3727/44/29/295301 ↗
16. Gravure printed organic rectifying diodes operating at high frequencies10.1016/j.orgel.2009.04.008 ↗
17. Capacitive behavior of pentacene-based diodes: quasistatic dielectric constant and dielectric strength10.1063/1.3574661 ↗
18. Space-charge-limited currents in solids10.1103/PhysRev.97.1538 ↗
19. Simplified theory of space-charge-limited currents in an insulator with traps10.1103/PhysRev.103.1648 ↗