Role of hole injection layer in intermediate connector of tandem organic light-emitting devices
Source abstract
Abstract
Abstract In this work, we demonstrate three kinds of intermediate connectors (ICs) having a general configuration of “LiNH2-doped 4,7-diphenyl-1,10-phenanthroline (BPhen)/hole injection layer (HIL)/N,N′-diphenyl-N,N′-bis(1-naphthyl)-1,1′-biphenyl-4,4′-diamine (NPB)”, in which the HIL is 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HAT-CN), MoO3 or MoO3-doped NPB, respectively. Tandem organic light-emitting devices (OLEDs), vertically stacking two electroluminescence units, are fabricated using these intermediate connectors in between. The results show that, higher power efficiency is achievable in the cases of utilizing HAT-CN and MoO3-doped NPB as HILs in the intermediate connectors versus MoO3, whereas higher current efficiency can be obtained in the cases of using MoO3 and MoO3-doped NPB versus HAT-CN. We use the current density–voltage and low frequency differential capacitance–voltage measurements and find that the HILs primarily influence the voltage drop and the charge generation capability of intermediate connectors. The correlation between the effectiveness of intermediate connectors and the performances of tandem OLEDs is established, which can shed light on choosing suitable component materials to optimize the intermediate connectors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Multiphoton organic EL device having charge generation layer10.1889/1.1832449 ↗
2. High-efficiency tandem organic light-emitting diodes10.1063/1.1638624 ↗
3. Organic heterojunctions as a charge generation layer in tandem organic light-emitting diodes: the effect of interfacial energy level and charge carrier mobility10.1039/c1jm12499d ↗
4. Improved interconnecting structure for a tandem organic light emitting diode10.1088/0268-1242/26/9/095011 ↗
5. Highly stable charge generation layers using cesium phosphate as n-dopants and inserting interlayers10.1063/1.4720064 ↗
6. High-efficiency stacked white organic light-emitting diodes10.1063/1.2837419 ↗
7. Highly efficient p–i–n and tandem organic light-emitting devices using an air-stable and low-temperature-evaporable metal azide as an n-dopant10.1002/adfm.201000137 ↗
8. Tandem organic light-emitting diodes with KBH4 doped 9,10-bis(3-(pyridin-3-yl)phenyl)anthracene connected to the charge generation layer10.1364/OE.20.014564 ↗
9. Effective organic-based connection unit for stacked organic light-emitting devices10.1063/1.2357846 ↗
10. Highly stable and efficient tandem organic light-emitting devices with intermediate connectors using lithium amide as n-type dopant10.1063/1.4894096 ↗
11. Tandem organic light-emitting diode using hexaazatriphenylene hexacarbonitrile in the intermediate connector10.1002/adma.200700454 ↗
12. White stacked electrophosphorescent organic light-emitting devices employing MoO3 as a charge-generation layer10.1002/adma.200501915 ↗
13. Highly efficient pin white organic light emitting devices with tandem structure10.1063/1.2822398 ↗
14. White organic light-emitting diodes based on tandem structures10.1063/1.2120898 ↗
15. Influences of connecting unit architecture on the performance of tandem organic light-emitting devices10.1002/adfm.200600642 ↗
16. Interfacial electronic structures of WO3-based intermediate connectors in tandem organic light-emitting diodes10.1016/j.orgel.2010.07.009 ↗
17. The mechanism of charge generation in charge-generation units composed of p-doped hole-transporting layer/HATCN/n-doped electron-transporting layers10.1002/adfm.201102212 ↗
18. Capacitance measurement in organic thin-film device with internal charge separation zone10.1143/JJAP.44.L1059 ↗
19. Role of the charge generation layer in tandem organic light-emitting diodes investigated by time-resolved electroluminescence spectroscopy10.1021/jp1095085 ↗
20. Charge separation process in an ultrathin electron-injecting bilayer-assisted charge generation unit for tandem organic light-emitting diodes10.1021/jp4040584 ↗
21. Charge generation layers comprising transition metal-oxide/organic interfaces: electronic structure and charge generation mechanism10.1063/1.3427430 ↗
22. The role of transition metal oxides in charge-generation layers for stacked organic-emitting diodes10.1002/adfm.201000301 ↗
23. Interfacial charge transfer and charge generation in organic electronic devices10.1016/j.orgel.2011.01.001 ↗
24. Copper hexadecafluorophthalocyanine and copper phthalocyanine as a pure organic connecting unit in blue tandem organic light-emitting devices10.1063/1.2426338 ↗
25. Metallic conduction at organic charge-transfer interfaces10.1038/nmat2205 ↗
26. Charge generation mechanism of metal oxide interconnection in tandem organic light emitting diodes10.1021/jp212090b ↗
27. Power efficiency improvement in a tandem organic light-emitting diode10.1063/1.2938269 ↗
28. Origin of enhanced hole injection in inverted organic devices with electron accepting interlayer10.1002/adfm.201200185 ↗
29. Study of hole-injecting properties in efficient, stable, and simplified phosphorescent organic light-emitting diodes by impedance spectroscopy10.1021/am2013568 ↗
30. Enhanced bulk conductivity and bipolar transport in mixtures of MoOx and organic hole transport materials10.1016/j.tsf.2013.03.048 ↗
31. Determination of injection barriers in organic semiconductor devices from capacitance measurements10.1103/PhysRevLett.100.086802 ↗