Enhanced photo-stability of inverted organic solar cells via using polyethylenimine in the electron extraction layers
Source abstract
Abstract
Abstract The influence of using Polyethylenimine (PEI) in the electron extraction layers (EELs) on the photo-stability of inverted organic solar cells (OSCs) is investigated. Results show that introducing PEI in the commonly used ZnO EELs, either mixed in the same layer with the ZnO (ZnO:PEI mixture) or in a separate layer in the form of a bilayer EEL configuration (ZnO/PEI), reduces the susceptibility of OSCs to photo-degradation with the mixture giving more significant stability enhancements. In comparison to the widely used ZnO EEL, the use of ZnO:PEI mixture is found to lead to ∼ 5× higher PCE stability under continuous UV irradiation, the latter being the main factor behind the limited stability of the cells under sunlight, primarily due to a more stable V o c and FF. Tests on electron only devices show that the higher photo-stability is mainly due to the role of the ZnO:PEI mixture in minimizing light-induced deterioration in electron collection efficiency at OSCs electron collection contacts under sunlight. Kelvin probe force microscopy (KPFM) measurements show that the use of ZnO:PEI helps maintain a more stable surface potential at the electron collection contact, hence the more stable V o c and FF. X-ray photoelectron spectroscopy (XPS) measurements reveal that the stability enhancement is likely associated with chemical interactions between PEI and ITO at the ITO/ZnO:PEI interface that produce a more electronically and energetically stable contact that is less susceptible to changes in surface potential or work function by UV illumination. Using PEI in the form of a neat layer next to the ITO in a bilayer EEL (PEI/ZnO) is found to provide a similar significant enhancement in photo-stability, further ascertaining the above conclusions. The findings not only reveal the potential of utilizing PEI in the EEL, but also shed light on some of the root causes of the limited photo-stability of OSCs and approaches to mitigate their effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. Polymer solar cells processed using anisole as a relatively nontoxic solvent10.1002/ente.201300174 ↗
4. Polymer based organic solar cells using ink-jet printed active layers10.1063/1.2833185 ↗
5. Polymer photovoltaics with top metal electrode deposited by solution-processing10.1109/TED.2014.2326818 ↗
6. Enhanced lifetime of polymer solar cells by surface passivation of metal oxide buffer layers10.1021/acsami.5b04687 ↗
7. Analysis of the degradation mechanism of ITO-free organic solar cells under UV radiation10.1016/j.solmat.2013.10.021 ↗
8. Significant stability enhancement in high‐efficiency polymer: fullerene bulk heterojunction solar cells by blocking ultraviolet photons from solar light10.1002/advs.201500269 ↗
9. Overcoming ultraviolet light instability of sensitized TiO 2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
10. The effect of charge extraction layers on the photo-stability of vacuum-deposited versus solution-coated organic solar cells10.1016/j.orgel.2013.10.017 ↗
11. Williams · 2013 · 88301V
12. The photo‐stability of polymer solar cells: contact photo‐degradation and the benefits of interfacial layers10.1002/adfm.201202567 ↗
13. Photochemical deterioration of the organic/metal contacts in organic optoelectronic devices10.1063/1.4752252 ↗
14. Stability of inverted organic solar cells with ZnO contact layers deposited from precursor solutions10.1039/C4EE02488E ↗
15. Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer solar cells10.1002/adfm.201101915 ↗
16. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
17. Circumventing UV light induced nanomorphology disorder to achieve long lifetime PTB7‐Th: PCBM based solar cells10.1002/aenm.201701201 ↗
18. Inverted polymer solar cells integrated with a low‐temperature‐annealed sol‐gel‐derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
19. Influences of surface roughness of ZnO electron transport layer on the photovoltaic performance of organic inverted solar cells10.1021/jp308480u ↗
20. High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
21. A review on the development of the inverted polymer solar cell architecture10.1080/15583724.2010.515764 ↗
22. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
23. Polyethylenimine interfacial layers in inverted organic photovoltaic devices: effects of ethoxylation and molecular weight on efficiency and temporal stability10.1021/acsami.5b08147 ↗
24. 8.9% single‐stack inverted polymer solar cells with electron‐rich polymer nanolayer‐modified inorganic electron‐Collecting buffer layers10.1002/aenm.201301692 ↗
25. Influence of fluorination on the microstructure and performance of diketopyrrolopyrrole‐based polymer solar cells10.1002/polb.24151 ↗
26. Wide bandgap small molecular acceptors for low energy loss organic solar cells10.1039/C7TC04669C ↗
27. Anthracene-based perylene diimide electron-acceptor for fullerene-free organic solar cells10.1016/j.dyepig.2017.04.057 ↗
28. A low-cost and low-temperature processable zinc oxide-polyethylenimine (ZnO: PEI) nano-composite as cathode buffer layer for organic and perovskite solar cells10.1016/j.orgel.2016.08.012 ↗
29. Solution-processed zinc oxide/polyethylenimine nanocomposites as tunable electron transport layers for highly efficient bulk heterojunction polymer solar cells10.1021/acsami.5b00521 ↗
30. Annealing-free ZnO: PEI composite cathode interfacial layer for efficient organic solar cells10.1021/acsphotonics.7b01096 ↗
31. Enhanced photostability in polymer solar cells achieved with modified electron transport layer10.1016/j.tsf.2018.09.040 ↗
32. Crucial role of the electron transport layer and UV light on the open-circuit voltage loss in inverted organic solar cells10.1021/acsami.7b09059 ↗
33. The role of polyethylenimine in enhancing the efficiency of quantum dot light-emitting devices10.1039/C7NR07683E ↗
34. Enhanced ultraviolet stability of air-processed polymer solar cells by Al doping of the ZnO interlayer10.1021/acsami.5b08255 ↗
35. Elimination of burn-in open-circuit voltage degradation by ZnO surface modification in organic solar cells10.1021/am507056h ↗
36. Morphological and electrical control of fullerene dimerization determines organic photovoltaic stability10.1039/C5EE02912K ↗
37. Efficient organic blue‐light‐emitting devices with double confinement on terfluorenes with ambipolar carrier transport properties10.1002/adma.200305619 ↗
38. Overcoming the “Light‐Soaking” issue in inverted organic solar cells by the use of Al: ZnO electron extraction layers10.1002/aenm.201300402 ↗
39. The root causes of the limited electroluminescence stability of organic light-emitting devices made by solution-coating10.1021/acsami.8b00926 ↗
40. Exciton–polaron‐induced aggregation of wide‐bandgap materials and its implication on the electroluminescence stability of phosphorescent organic light‐emitting devices10.1002/adfm.201303840 ↗
41. Electrical and photo‐induced degradation of ZnO layers in organic photovoltaics10.1002/aenm.201100227 ↗
42. Enhancing functionality of ZnO hole blocking layer in organic photovoltaics10.1016/j.solmat.2011.11.026 ↗
43. Stability/instability of conductivity and work function changes of ITO thin films, UV-irradiated in air or vacuum: measurements by the four-probe method and by Kelvin force microscopy10.1016/S0379-6779(00)01337-0 ↗
44. Avoiding photoinduced shunts in organic solar cells by the use of tin oxide (SnOx) as electron extraction material instead of ZnO10.1002/aenm.201600347 ↗
45. Role of ITO and PEDOT: PSS in stability/degradation of polymer: fullerene bulk heterojunctions solar cells10.1016/j.solmat.2009.10.026 ↗
46. Direct correlation between work function of indium-tin-oxide electrodes and solar cell performance influenced by ultraviolet irradiation and air exposure10.1039/c2cp42448g ↗
47. Interfacial degradation in organic optoelectronics10.1039/c2ra22770c ↗
48. An XPS study of zinc oxide thin film growth on copper using zinc acetate as a precursor10.1016/0040-6090(93)90542-W ↗
49. X-ray and UV photoemission studies of mono-, bi-and multilayers of physisorbed molecules: O2 and N2 on graphite10.1016/0039-6028(93)90180-R ↗