journal article·2015-09

Transparent and flexible amorphous InZnAlO films grown by roll-to-roll sputtering for acidic buffer-free flexible organic solar cells

Da-Young Cho, Ki-Hyun Kim, Tae-Woong Kim, Yong-Jin Noh, Seok-In Na, Kwun-Bum Chung, Han-Ki Kim

Publisher page

Abstract

Abstract We report on transparent and flexible amorphous In–Zn–Al–O (a-IZAO) films prepared by roll-to-roll (RTR) sputtering for use as anodes in acidic buffer free flexible organic solar cells (FOSCs). The presence of Zn and Al structural stabilizers in the In 2 O 3 matrix produced a completely amorphous structure with the high optical transmittance of 89.25% and the low resistivity of 2.123 × 10 −3 Ω-cm, as well as the high work function of 5.14 eV, making the a-IZAO films suitable for use as flexible anodes for FOSCs. In addition, the a-IZAO films showed no change in resistance (Δ R ) during outer and inner bending fatigue tests due to their good mechanical flexibility. Relative to the power conversion efficiency (1.944%) of a PEDOT:PSS-based FOSCs, a FOSC fabricated by using an a-IZAO anode and without the use of acidic PEDOT:PSS buffer showed greater power conversion efficiency (2.509%), owing to the absence of interfacial reactions between the acidic PEDOT:PSS and the a-IZAO anode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Crawford · 2005
2. Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors10.1038/nature03090 ↗
3. Transparent conducting oxides for photovoltaics10.1557/mrs2007.29 ↗
4. Transparent, near-infrared organic photovoltaic solar cells for window and energy-scavenging applications10.1063/1.3567516 ↗
5. The effect of film microstructures on cracking of transparent conductive oxide (TCO) coatings on polymer substrates10.1016/j.surfcoat.2010.08.055 ↗
6. Atmospheric plasma treatment of flexible IZO electrode grown on PET substrate for flexible organic solar cells10.1149/1.3236387 ↗
7. Dependence of electrical, optical, and structural properties on the thickness of IZTO thin films grown by linear facing target sputtering for organic solar cells10.1016/j.solmat.2010.05.056 ↗
8. Rapid thermal annealing effect on the characteristics of ZnSnO3 films prepared by RF magnetron sputtering10.1016/j.cap.2012.05.014 ↗
9. Transparent and flexible amorphous In-Si-O films for flexible organic solar cells10.1063/1.4788687 ↗
10. C. A. Bishop, Roll-to-Roll Vacuum Deposition of Barrier Coatings; Wiley (2010).10.1002/9780470876510 ↗
11. Stability of amorphous InAlZnO thin-film transistors10.1116/1.4862150 ↗
12. Addition of aluminium to solution processed conductive indium tin oxide thin film for an oxide thin film transistor10.1063/1.3442482 ↗
13. Water assisted oxygen absorption on the instability of amorphous InAlZnO thin-film transistors10.1039/C3RA44513E ↗
14. Roll-to-roll sputtered Si-doped In2O3/Ag/Si-doped In2O3 multilayer as flexible and transparent anodes for flexible organic solar cells10.1116/1.4901875 ↗
15. Defect mechanisms in the In2O3 (ZnO)k system (k=3, 5, 7, 9)10.1063/1.4764924 ↗
16. New figure of merit for transparent conductors10.1063/1.323240 ↗
17. Multi-component transparent conducting oxides: progress in materials modelling
18. Thermal evolution and electrical correlation of defect states in Hf-based high-k dielectrics on n-type Ge (100): Local atomic bonding symmetry10.1063/1.3236679 ↗
19. Semiconducting properties of amorphous GaZnSnO thin film based on combinatorial electronic structures10.1063/1.4875044 ↗
20. Simple brush-painting of Ti-doped In2O3 transparent conducting electrodes from nano-particle solution for organic solar cells
21. Mechanical integrity of flexible InZnO/Ag/InZnO multilayer electrodes grown by continuous roll-to-roll sputtering10.1016/j.solmat.2011.08.001 ↗
22. Mechanics of rollable and foldable film-on-foil electronics10.1063/1.123478 ↗
23. An Al-doped ZnO electrode grown by highly efficient cylindrical rotating magnetron sputtering for low cost organic photovoltaics10.1088/0022-3727/43/11/115101 ↗
24. Fluorine-functionalized and simultaneously reduced graphene oxide as a novel hole transporting layer for highly efficient and stable organic photovoltaic cells10.1039/c4nr01038h ↗